Duct Leakage Test in Wyncote, PA

Improve HVAC performance and ensure energy code compliance with dependable duct leakage test in Wyncote, PA. Our certified technicians find and measure ductwork air leaks, allowing homeowners and builders to improve indoor comfort, reduce energy waste, and satisfy state standards.

Why Duct Leakage Test is Important In Wyncote, PA

In most states and municipalities, the 2015 IECC, International Energy Conservation Code is required for single-family homes, while the 2018 International Energy Conservation Code is required for multi-family homes. The change will introduce meaningful implications for home builders and HVAC contractors active in the state. A Duct Leakage Test together with a Blower Door Test must now be performed in all newly built or remodeled homes to comply with the 2015 regulations. Did you know that ducts often contribute significantly to air leakage problems in homes throughout Pennsylvania, New Jersey, and Delaware? Leaked air can drive up your utility costs, tax your HVAC equipment, and circulate insulation debris and dust throughout your home. This makes duct leakage test indispensable no matter the age of your home. Continue reading to understand why duct leakage test is important and the benefits it provides.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To commence a duct leakage test in Wyncote, PA, your technician will seal every supply and return register except the primary return or air handler. A specially calibrated fan, known as a duct blaster, is then attached to the opening. The purpose of this fan is to depressurize the duct system, creating the ideal conditions to identify where air is escaping.

The duct blaster operates alongside a precision pressure sensor to track airflow and identify duct leaks without disrupting your home. A duct leakage test — sometimes called a duct blaster test — detects air loss in the duct system, allowing you to apply the most suitable sealing solutions.

duct leakage test is efficient, mess-free, and completely non-intrusive for residents. Most tests in Wyncote, PA are wrapped up in 30 to 60 minutes, with improvements that continue to boost comfort and efficiency for years.

How to Measure Duct Leakage

Duct leakage is determined in cubic feet per minute (CFM) for every 100 square feet of conditioned interior space. Your technician uses a nanometer to monitor tiny pressure fluctuations that indicate how much air is leaking through the ducts. Understanding this number helps you reveal problem areas, consider enhancement strategies, and validate that your home meets local energy code requirements in Wyncote, PA.

Cost of Excessive Duct Leakage

If you’re seeing higher energy bills, irregular heating or cooling, or frequent HVAC malfunctions, duct leakage may be at fault. According to ENERGY STAR, homes across the country lose 20% to 30% of their conditioned air through duct leakage. Outside air that’s too hot or too cold entering your system strains your HVAC, resulting in higher energy consumption and less comfort.

Overworked equipment also creates more wear, leading to breakdowns and costly fixes. Proper duct sealing helps ensure the long-term stability of your HVAC system, extending its lifespan and reducing future maintenance work.

Duct leaks can also cause dust, mold spores, and excess moisture — along with other contaminants — to infiltrate the duct system. This can worsen allergy reactions, negatively affect indoor air quality, and contribute to costly hidden structural damage over the years.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC specifies that newly constructed homes must use fully sealed duct systems with modern, efficient materials such as mastic, foil tape, and insulation. But what happens when leaks are trapped deep inside wall or ceiling cavities?

Aerosol sealing technology (AeroSeal) gives technicians a way to reach concealed duct leaks without opening walls or ceilings. To complete this method, all vents are closed off except for one access opening. The HVAC system is isolated, and a machine is linked to the duct system. It pressurizes the ducts and releases a fine aerosolized sealant that fills small gaps and holes that traditional sealing methods cannot reach.

This method is highly effective for small to medium leaks. However, large openings may still require manual sealing with mastic and tape. Technicians run leakage tests both before and after aerosol sealing to gauge how much air loss decreased and confirm proper results.

Common Areas of Duct Leakage

The most likely place for ducts to leak air is through their joints. Ductwork involves multiple metal pieces pressed together with secure fittings and metal bands, yet these connections are rarely perfectly airtight.

As your HVAC system warms and cools over the seasons, the ductwork expands and then contracts. Over time, this movement causes the joints to loosen, creating gaps and leaks — which is why a duct leakage test is recommended for both new and older homes in Wyncote, PA.

Many energy auditors detect duct leakage by physically checking the ducts and using a small tool to assess the width of joint gaps. If your duct system was not sealed with mastic and approved tape, there’s a high likelihood that air is leaking.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must come in under 4 CFM per 100 square feet with the air handler, or 3 CFM per 100 square feet when the air handler is removed. For new construction, the home must pass a duct leakage test before qualifying for an occupancy certificate.

If your home in Wyncote, PA fails its duct leakage test, you are likely facing inflated heating and cooling costs — along with increased strain on your HVAC system. Meeting the 3–4 CFM requirement is vital not only for satisfying code rules but also for preserving your home’s comfort and energy performance.

Your technician will also provide expert recommendations on how to address leakage issues so you can achieve a passing score, lower your utility bills, and improve your home’s overall performance.

Local Energy Audits — affordable duct leakage test in Wyncote, PA

Local Energy Audits is honored to serve customers in Wyncote, PA and all surrounding areas. We specialize in identifying duct leakage and energy inefficiencies using blower door tests and duct leakage tests. Whether you’re building a new home or improving an existing one, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by closing off every duct and register with duct mask tape across both the supply and return sides.

After the registers are sealed, we position the duct tester on the HVAC unit or on a primary return.

The ducts are then depressurized to 25 Pascals. At that point, the nanometer allows us to get an accurate duct leakage measurement.

Schedule Your Duct Leakage Test in Wyncote, PA

Ensure your HVAC system maintains top efficiency, remains compliant, and delivers strong performance with dependable duct leakage test in Wyncote, PA. Whether you’re a homeowner working to improve comfort or a contractor closing out a project with a final inspection, our certified team provides fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and offer on-site guidance to help you pass your test, reduce energy waste, and protect the long-term health of your HVAC system.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Wyncote, PA with dependable and energy-efficient testing solutions.