Duct Leakage Test in Dublin, PA

How a Duct Leakage Test Is Conducted

To start a duct leakage test in Dublin, PA, the technician will close and seal every supply and return register except the main return or air handler. A duct blaster fan, carefully calibrated for accuracy, is then attached to the duct opening. It depressurizes the ductwork, allowing leaks to become more noticeable.

The duct blaster operates alongside a precision pressure sensor to track airflow and identify duct leaks without disrupting your home. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is efficient, clean, and performed without bothering residents. Most tests in Dublin, PA take 30 to 60 minutes to complete, and the benefits to comfort and efficiency can endure for years.

How to Measure Duct Leakage

Duct leakage is defined in cubic feet per minute (CFM) per 100 square feet of conditioned space within the structure. Your technician uses a nanometer to capture subtle pressure changes, allowing accurate measurement of duct air leakage. Understanding this number allows you to pinpoint problem areas, assess needed improvements, and confirm whether your home satisfies local energy code requirements in Dublin, PA.

Cost of Excessive Duct Leakage

If you observe rising utility costs, temperature swings in different rooms, or regular HVAC breakdowns, duct leakage may be involved. According to ENERGY STAR, the average household loses 20%–30% of conditioned air because of leaking ducts. Hot or cold air entering from outside increases the workload on your HVAC system, leading to higher energy bills and a drop in comfort.

Overworked equipment also contributes to repeated breakdowns and pricey repairs. Proper duct sealing helps keep your HVAC system healthy over the long run, prolonging its lifespan and lowering continued maintenance needs.

Duct leaks can also create openings for dust, mold spores, moisture, and various contaminants to enter the duct system. This can intensify allergy symptoms, harm indoor air quality, and cause long-term structural damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC sets a requirement that all new homes feature ducts sealed completely with modern materials like mastic, foil tape, and insulation. But what about leaks that occur deep behind walls or ceilings out of sight?

Aerosol sealing technology (AeroSeal) can access interior duct leaks that are difficult to reach manually. To set up this method, all vents are sealed off except for a single access point. The HVAC system is isolated, and a machine is fitted to the duct system. It pressurizes the ducts and distributes a fine aerosolized sealant that seals small openings traditional methods cannot reach.

This method works efficiently for small to medium leaks. However, larger gaps usually require manual sealing using mastic and tape. Technicians run leakage tests both before and after aerosol sealing to gauge how much air loss decreased and confirm proper results.

Common Areas of Duct Leakage

The most common location for air leakage in ducts is the joints. Ductwork includes several metal sections pressed together with tight fittings and metal bands, but those connections are almost never airtight.

As your HVAC system moves through annual heating and cooling cycles, the ductwork expands and then contracts. Over time, this movement gradually loosens the joints, creating leaks and gaps — highlighting the importance of duct leakage test in both new and older homes in Dublin, PA.

Many energy auditors examine duct leakage by touching the ducts and using a small tool to measure the gap width between joints. If your duct system was not sealed with mastic and approved tape, there’s a high likelihood that air is leaking.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system needs to measure under 4 CFM per 100 square feet when the air handler is included, or 3 CFM per 100 square feet when it is not. For new construction, a passing duct leakage test is mandatory before a home can be granted an occupancy certificate.

If your home in Dublin, PA does not pass its duct leakage inspection, you’re likely paying higher heating and cooling bills — and stressing your HVAC system over time. Meeting the 3–4 CFM requirement is needed not only for passing inspections, but also for improving home comfort and energy efficiency.

Your technician will also provide professional insights on resolving leakage issues so you can achieve a passing score, lower your utility costs, and optimize home performance.

Local Energy Audits — affordable duct leakage test in Dublin, PA

Local Energy Audits is proud to work with customers in Dublin, PA and all nearby areas. We specialize in testing for duct leakage and energy inefficiencies using blower door and duct leakage methods. Whether you’re building from scratch or upgrading your home, we’re here to assist.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.