Duct Leakage Test in Levittown, PA

Keep your HVAC system running at peak efficiency and in full compliance with local codes through expert duct leakage test in Levittown, PA. Our certified technicians measure and identify ductwork air leaks, assisting homeowners and builders in boosting comfort, limiting energy waste, and maintaining state compliance.

Why Duct Leakage Test is Important In Levittown, PA

States and municipalities have put in place the 2015 IECC, International Energy Conservation Code for single-family projects and the 2018 International Energy Conservation Code for multi-family projects. The change will result in several substantial implications for home builders and HVAC contractors engaged in work across the state. A Duct Leakage Test plus a Blower Door Test are now compulsory in newly constructed or renovated homes according to the 2015 regulations. Did you know that duct systems can be major sources of air leakage in homes across Pennsylvania, New Jersey, and Delaware? Leaked air can drive up your utility costs, tax your HVAC equipment, and circulate insulation debris and dust throughout your home. This makes duct leakage test a key step for new and older homes alike. Read ahead to see why duct leakage test is needed and what advantages it offers.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To begin performing a duct leakage test in Levittown, PA, your technician closes off all supply and return registers except the main return or air handler system. A specially calibrated device known as a duct blaster is then attached to the duct opening. Its purpose is to depressurize the system so that escaping air can be detected.

The duct blaster pairs with a precision pressure sensor to measure airflow and identify leak locations in the ducts without disrupting your home. A duct leakage test — also referred to as a duct blaster test — highlights where air is leaking from your ducts to help you choose the proper sealing method.

duct leakage test is efficient, mess-free, and completely non-intrusive for residents. Most tests in Levittown, PA finish in 30 to 60 minutes, and the upgrades continue benefiting your home’s comfort and efficiency long after.

How to Measure Duct Leakage

Duct leakage is specified in cubic feet per minute (CFM) for each 100 square feet of conditioned space. Your technician uses a nanometer to monitor tiny pressure fluctuations that indicate how much air is leaking through the ducts. Understanding this number helps you pinpoint leakage points, think through potential improvements, and verify your home’s adherence to local energy code requirements in Levittown, PA.

Cost of Excessive Duct Leakage

If you’re encountering increased energy bills, temperature inconsistencies, or constant HVAC repairs, duct leakage could be the source. According to ENERGY STAR, the average duct system loses between 20% and 30% of its conditioned air due to leaks. Hot or cold air entering from outside increases the workload on your HVAC system, leading to higher energy bills and a drop in comfort.

Overworked equipment also puts extra stress on the system, resulting in breakdowns and increased repair costs. Proper duct sealing helps uphold the long-term performance of your HVAC system, stretching its lifespan and decreasing routine maintenance demands.

Duct leaks can also let in dust, mold spores, added moisture, and other harmful contaminants. This can increase allergy discomfort, degrade indoor air quality, and eventually cause expensive structural issues behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC specifies that newly constructed homes must use fully sealed duct systems with modern, efficient materials such as mastic, foil tape, and insulation. But what about leaks that are hidden far behind walls or ceilings?

Aerosol sealing technology (AeroSeal) is an effective solution for reaching hidden ductwork leaks. To perform this method, all vents are sealed off except for one access point. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and distributes an ultra-fine aerosol sealant to fill small gaps and holes that manual sealing methods can’t access.

This method works efficiently for small to medium leaks. However, larger gaps usually require manual sealing using mastic and tape. Technicians conduct a duct leakage test before and after aerosol sealing to measure how much the leakage has been reduced and ensure the treatment is successful.

Common Areas of Duct Leakage

The most likely place for ducts to leak air is through their joints. Ductwork involves multiple metal pieces pressed together with secure fittings and metal bands, yet these connections are rarely perfectly airtight.

As your HVAC system regulates temperatures through the seasons, the ducts expand when heated and contract when cooled. Over time, this movement shifts and loosens the joints, resulting in gaps and leaks — which is why all homes in Levittown, PA, new or older, benefit from duct leakage test.

Many energy auditors test for duct leakage by feeling along the ducts and using a small tool to gauge how wide the gaps are at the joints. If your duct system has not received sealing with mastic and approved tape, leakage is very probable.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system is required to measure under 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet when it isn’t installed. For new construction, a duct leakage test must be successfully passed before the home can obtain an occupancy certificate.

If your home in Levittown, PA does not meet the duct leakage requirement, you’re likely paying elevated heating and cooling costs — and overburdening your HVAC system. Meeting the 3–4 CFM requirement is significant not only for meeting local code but also for maintaining optimal comfort and efficiency in your home.

Your technician will also offer professional recommendations to tackle leakage issues so you can secure a passing score, reduce utility costs, and strengthen home performance.

Local Energy Audits — affordable duct leakage test in Levittown, PA

Local Energy Audits proudly offers services throughout Levittown, PA and neighboring areas. We specialize in finding duct leakage and energy inefficiencies through blower door tests and duct leakage tests. Whether you’re constructing a new home or upgrading an older one, we’re ready to assist.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by closing off every duct and register with duct mask tape across both the supply and return sides.

After the registers are sealed, we connect the duct tester to the unit or to a main return.

The ducts are then depressurized to a Pascal of 25. With the ducts depressurized we can use the nanometer to get a reading of the duct leakage.

Schedule Your Duct Leakage Test in Levittown, PA

Ensure your HVAC system delivers maximum efficiency, full compliance, and top performance through professional duct leakage test in Levittown, PA. Whether you’re a homeowner enhancing indoor comfort or a contractor finishing a final inspection, our certified team offers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and give on-site guidance to help you pass your test, minimize energy waste, and support the long-term health of your HVAC system.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Levittown, PA with dependable and energy-efficient testing solutions.