Duct Leakage Test in Hereford, PA

Enhance your HVAC system’s efficiency and satisfy energy regulations through precise duct leakage test in Hereford, PA. Our certified technicians find and measure ductwork air leaks, allowing homeowners and builders to improve indoor comfort, reduce energy waste, and satisfy state standards.

Why Duct Leakage Test is Important In Hereford, PA

Across the country, states and municipalities enforce the 2015 IECC, International Energy Conservation Code for single-family buildings and the 2018 International Energy Conservation Code for multi-family buildings. The change will impose meaningful implications on home builders and HVAC contractors working regionally within the state. A Duct Leakage Test and a mandatory Blower Door Test are now required for all new construction or remodeled homes under the 2015 regulatory standards. Did you know that duct leakage is one of the top reasons for air loss in homes in Pennsylvania, New Jersey, and Delaware? Leaked air can raise your energy bills, strain your HVAC system, and spread insulation and dust throughout your home. This makes duct leakage test indispensable no matter the age of your home. Continue reading to understand why duct leakage test is important and the benefits it provides.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To start a duct leakage test in Hereford, PA, the technician will close and seal every supply and return register except the main return or air handler. A duct blaster, designed as a calibrated testing fan, is then attached to the duct system. Its purpose is to depressurize the ducts and uncover leak points.

The duct blaster collaborates with a precision pressure sensor to evaluate airflow and locate leaks throughout the ductwork without disturbing your household. A duct leakage test — often referred to as a duct blaster test — identifies air loss in your ducts, allowing you to find the most effective ways to seal them.

duct leakage test is rapid, clean, and performed without inconvenience to residents. Most tests in Hereford, PA are wrapped up in 30 to 60 minutes, with improvements that continue to boost comfort and efficiency for years.

How to Measure Duct Leakage

Duct leakage is tracked in cubic feet per minute (CFM) per 100 square feet of conditioned living area. Your technician uses a nanometer to detect pressure variations, helping quantify the amount of duct leakage. Understanding this number helps you recognize where issues exist, plan meaningful improvements, and check your home against local energy code requirements in Hereford, PA.

Cost of Excessive Duct Leakage

If your home has elevated utility bills, temperature imbalances, or frequent HVAC service calls, duct leakage may be responsible. According to ENERGY STAR, homes with leaky ducts routinely lose 20% to 30% of conditioned air. If outdoor hot or cold air infiltrates your system, your HVAC struggles to maintain temperatures, raising energy costs and lowering comfort.

Overworked equipment also puts extra stress on the system, resulting in breakdowns and increased repair costs. Proper duct sealing helps support the long-term durability of your HVAC system, lengthening its lifespan and minimizing ongoing maintenance demands.

Duct leaks can also pull in dust, mold spores, moisture, and numerous contaminants into the duct system. This can worsen allergy flare-ups, reduce indoor air quality, and cause long-term structural deterioration behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires all newly constructed homes to have fully sealed ductwork with modern, energy-saving materials such as mastic, foil tape, and insulation. But what about leaks that occur deep behind walls or ceilings out of sight?

Aerosol sealing technology (AeroSeal) gives technicians a way to reach concealed duct leaks without opening walls or ceilings. To use this method, technicians seal all vents except one access point. The HVAC system is isolated, and a machine is hooked up to the duct system. It pressurizes the ducts and sprays a fine mist of sealant that fills tiny leaks and holes beyond the reach of conventional sealing.

This method is extremely effective for sealing small to medium leaks. However, big gaps may still need manual sealing using mastic and tape. Technicians use a duct leakage test before and after aerosol sealing to evaluate how much leakage has been lowered and verify the results.

Common Areas of Duct Leakage

The most common place for ducts to leak air is through the joints. Ductwork is made of multiple metal pieces pressed together using tight fittings and metal bands, but these connections are rarely airtight.

As your HVAC system regulates temperatures through the seasons, the ducts expand when heated and contract when cooled. Over time, this movement results in loose joints that create gaps and leaks — making a duct leakage test necessary for new and older homes in Hereford, PA.

Many energy auditors look for duct leakage by running their hands along the ducts and using a small tool to measure the width of gaps at the joints. If your duct system is unsealed with mastic and approved tape, air leakage is almost certainly occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must remain below 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet if the air handler is missing. For new construction, a passing duct leakage test is essential before the home can qualify for an occupancy certificate.

If your home in Hereford, PA does not meet duct leakage standards, you are likely overpaying for heating and cooling — and adding unnecessary strain to your HVAC equipment. Meeting the 3–4 CFM requirement is needed not only for passing inspections, but also for improving home comfort and energy efficiency.

Your technician will also give informed guidance on addressing leakage problems, enabling you to pass the test, reduce energy bills, and enhance your home’s performance.

Local Energy Audits — affordable duct leakage test in Hereford, PA

Local Energy Audits is proud to assist customers across Hereford, PA and its surrounding communities. We specialize in locating and diagnosing duct leakage and energy inefficiencies through blower door and duct leakage tests. Whether your home is newly built or older, we’re here to help.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with duct mask tape being placed on all ducts and registers on both the supply and return sides.

After the registers are sealed, we connect the duct tester either to the HVAC unit itself or a central return.

The ducts are then depressurized to 25 Pascals. With this pressure applied, we use the nanometer to measure how much leakage is present.

Schedule Your Duct Leakage Test in Hereford, PA

Ensure your HVAC system stays energy-efficient, fully compliant, and operating at peak performance with accurate duct leakage test in Hereford, PA. Whether you’re a homeowner seeking better comfort or a contractor wrapping up a final inspection, our certified team delivers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and deliver on-site help to ensure you pass your test, lower energy waste, and maintain your HVAC system’s long-term reliability.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Hereford, PA with dependable and energy-efficient testing solutions.