Duct Leakage Test in Mo DEna, PA

How a Duct Leakage Test Is Conducted

To start conducting a duct leakage test in Mo DEna, PA, the technician seals all supply and return registers other than the main return or the air handler. A specially calibrated fan, known as a duct blaster, is then attached to the opening. The purpose of this fan is to depressurize the duct system, creating the ideal conditions to identify where air is escaping.

The duct blaster uses its precision pressure sensor partner to measure airflow and uncover duct leaks without causing any home disruption. A duct leakage test — often described as a duct blaster test — identifies leaking areas in your ducts so you can determine the most efficient sealing fix.

duct leakage test is quick, neat, and intentionally non-intrusive for anyone living in the home. Most tests in Mo DEna, PA take between 30 and 60 minutes, and the improvements they deliver can elevate comfort and efficiency for years ahead.

How to Measure Duct Leakage

Duct leakage is measured in cubic feet per minute (CFM) per 100 square feet of conditioned space. Your technician uses a nanometer to identify subtle pressure differences, helping determine how much air is leaking from the ducts. Understanding this number helps you uncover weak points, analyze opportunities for upgrades, and check whether your home follows local energy code requirements in Mo DEna, PA.

Cost of Excessive Duct Leakage

If you’re facing higher energy bills, uneven heating or cooling, or recurring HVAC repairs, duct leakage could be to blame. According to ENERGY STAR, leaking ducts cause the average home to lose 20%–30% of conditioned air. Hot or cold outside air leaking in makes your HVAC system work more than it should, driving up energy costs and diminishing comfort.

Overworked equipment also leads to recurring breakdowns and higher repair expenses. Proper duct sealing helps safeguard the long-term reliability of your HVAC system, extending its lifespan and reducing how often maintenance is needed.

Duct leaks can also bring dust, mold spores, excess moisture, and other impurities into the duct system. This can amplify allergy problems, impact air quality indoors, and slowly create costly structural damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC mandates that new homes include fully sealed duct systems built with energy-efficient materials like mastic, foil tape, and proper insulation. But what about leaks located deep within walls or ceilings?

Aerosol sealing technology (AeroSeal) allows technicians to seal leaks located inside inaccessible parts of ductwork. To initiate this method, technicians seal every vent except one access point. The HVAC system is isolated, and a machine is connected to the ductwork. It pressurizes the ducts and releases a fine aerosolized sealant that fills small gaps and holes that traditional sealing methods cannot reach.

This method is extremely effective for sealing small to medium leaks. However, big gaps may still need manual sealing using mastic and tape. Technicians use a duct leakage test before and after aerosol sealing to evaluate how much leakage has been lowered and verify the results.

Common Areas of Duct Leakage

The most typical place for ducts to lose air is at the joints. Ductwork consists of different metal sections pressed together with tight fittings and metal bands, yet these joints are not usually airtight.

As your HVAC system delivers heat and cooling across different seasons, the ducts constantly expand and contract. Over time, this movement weakens joint connections, producing gaps and leaks — making duct leakage test essential for both new and older homes in Mo DEna, PA.

Many energy auditors check for leaks by feeling along the ductwork and using a small tool to gauge the size of gaps between joints. If your duct system hasn’t been sealed with mastic and approved tape, there is a strong likelihood that leakage is happening.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must show under 4 CFM per 100 square feet if the air handler is installed, or 3 CFM per 100 square feet if it is not. For new construction, you must pass a duct leakage test before the home can be approved for an occupancy certificate.

If your home in Mo DEna, PA fails its duct leakage test, you are likely facing inflated heating and cooling costs — along with increased strain on your HVAC system. Meeting the 3–4 CFM requirement is indispensable not only for compliance purposes but for ensuring strong comfort and energy savings.

Your technician will also provide expert insights into correcting leakage issues so you can meet passing standards, lower your utility expenses, and improve overall home performance.

Local Energy Audits — affordable duct leakage test in Mo DEna, PA

Local Energy Audits proudly supports customers throughout Mo DEna, PA and the areas nearby. We specialize in identifying duct leakage and energy inefficiencies using blower door tests and duct leakage tests. Whether you’re building a new home or improving an existing one, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.