Duct Leakage Test in Newark, NJ

How a Duct Leakage Test Is Conducted

To start the duct testing process in Newark, NJ, the technician seals all supply and return registers except for the main return or the air handler. A duct blaster — a specially calibrated fan — is then connected to the opening. It depressurizes the duct system to expose areas where air is leaking.

The duct blaster uses its precision pressure sensor partner to measure airflow and uncover duct leaks without causing any home disruption. A duct leakage test — also referred to as a duct blaster test — highlights where air is leaking from your ducts to help you choose the proper sealing method.

duct leakage test is rapid, clean, and performed without inconvenience to residents. Most tests in Newark, NJ take between 30 and 60 minutes, and the improvements they deliver can elevate comfort and efficiency for years ahead.

How to Measure Duct Leakage

Duct leakage is defined in cubic feet per minute (CFM) per 100 square feet of conditioned space within the structure. Your technician uses a nanometer to evaluate small pressure shifts that signal air escaping through the ducts. Understanding this number allows you to highlight problem zones, explore improvement possibilities, and confirm compliance with local energy code requirements in Newark, NJ.

Cost of Excessive Duct Leakage

If your energy bills are unusually high, your rooms feel unevenly heated or cooled, or your HVAC system needs frequent repairs, duct leakage could be the issue. According to ENERGY STAR, most homes lose 20% to 30% of their conditioned air through leaking ductwork. Air entering from outside—whether warm or cold—makes your HVAC operate harder, causing energy costs to climb and comfort to decrease.

Overworked equipment also causes additional breakdowns and increases repair costs. Proper duct sealing helps uphold the long-term performance of your HVAC system, stretching its lifespan and decreasing routine maintenance demands.

Duct leaks can also let dust, mold spores, moisture, and other pollutants enter the duct system. This can worsen allergy reactions, negatively affect indoor air quality, and contribute to costly hidden structural damage over the years.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires new homes to have fully sealed duct systems using modern, energy-efficient materials such as mastic, foil tape, and insulation. But what about leaks that lie far within enclosed wall or ceiling spaces?

Aerosol sealing technology (AeroSeal) makes it possible to seal leaks found deep within the ductwork. To carry out the procedure, technicians seal off all vents except one access point. The HVAC system is isolated, and a machine is linked to the duct system. It pressurizes the ducts and pushes a fine aerosol sealant through them, sealing small holes that ordinary sealing methods can’t reach.

This method is great for handling small to medium leaks. However, larger holes often require manual sealing with mastic and tape. Technicians do a duct leakage test before and after aerosol sealing to calculate how much leakage has been reduced and validate the results.

Common Areas of Duct Leakage

The most common spot where air escapes in duct systems is the joints. Ductwork features several metal pieces pressed together using tight fittings and metal bands, though these areas are seldom airtight.

As your HVAC system moves through annual heating and cooling cycles, the ductwork expands and then contracts. Over time, this movement leads to joint loosening, generating gaps and leaks — a clear reason duct leakage test is recommended for new and older homes in Newark, NJ.

Many energy auditors verify duct leakage by feeling around the ducts and using a small tool to assess the opening size at the joints. If your duct system was never sealed using mastic and approved tape, there is a high probability that air leakage is present.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system needs to be under 4 CFM per 100 square feet when the air handler is installed, or 3 CFM per 100 square feet when it isn’t. For new construction, passing a duct leakage test is required before a home can receive an occupancy certificate.

If your home in Newark, NJ is unable to pass a duct leakage test, you are probably spending too much on heating and cooling — while your HVAC equipment endures long-term stress. Meeting the 3–4 CFM requirement is necessary not only for meeting code standards but also for ensuring strong energy efficiency and indoor comfort.

Your technician will also advise you on the best ways to address leakage issues so you can pass the test, reduce utility bills, and enhance your home’s efficiency.

Local Energy Audits — affordable duct leakage test in Newark, NJ

Local Energy Audits proudly works with clients throughout Newark, NJ and nearby locations. We specialize in evaluating duct leakage and energy inefficiencies with blower door and duct leakage tests. Whether you’re developing a new home or enhancing an older one, we’re here to help.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.