Duct Leakage Test in Elizabeth, NJ

Ensure your HVAC system is sealed, efficient, and fully compliant with local regulations through duct leakage test in Elizabeth, NJ. Our certified technicians identify and quantify air leaks in duct systems so homeowners and builders can optimize comfort, reduce energy waste, and meet state-level requirements.

Why Duct Leakage Test is Important In Elizabeth, NJ

Various states and municipalities have adopted the 2015 IECC, International Energy Conservation Code for single-family houses, along with the 2018 International Energy Conservation Code for multi-family units. The change will create considerable implications for home builders and HVAC contractors carrying out projects in the state. A Duct Leakage Test and a Blower Door Test are now mandatory for newly built or renovated homes under the 2015 regulations. Did you know that improperly sealed ducts account for a major portion of air leakage in homes across Pennsylvania, New Jersey, and Delaware? Leaked air can drive up energy bills, put extra stress on your HVAC system, and circulate dust and insulation throughout your living space. This makes duct leakage test an important requirement for homes regardless of age. Keep reading to understand why duct leakage test is necessary and how it can help you.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To begin performing a duct leakage test in Elizabeth, NJ, your technician closes off all supply and return registers except the main return or air handler system. A calibrated duct blaster fan is then mounted to the opening. This fan creates negative pressure inside the ducts, making air leakage locations easier to find.

The duct blaster uses its precision pressure sensor partner to measure airflow and uncover duct leaks without causing any home disruption. A duct leakage test — widely known as a duct blaster test — pinpoints air leakage in your ducts so you can choose the best sealing methods.

duct leakage test is straightforward, clean, and designed to be non-intrusive for residents. Most tests in Elizabeth, NJ are done within 30 to 60 minutes, with improvements that strengthen comfort and efficiency for years to come.

How to Measure Duct Leakage

Duct leakage is expressed in cubic feet per minute (CFM) per 100 square feet of the home’s conditioned area. Your technician uses a nanometer to measure tiny pressure differences, making it possible to determine how much air the ducts are losing. Understanding this number enables you to recognize problem areas, consider efficiency improvements, and verify that your home meets local energy code requirements in Elizabeth, NJ.

Cost of Excessive Duct Leakage

If you notice high energy costs, hot and cold spots, or ongoing HVAC repairs, duct leakage might be the underlying problem. According to ENERGY STAR, leaking ducts cause the average home to lose 20%–30% of conditioned air. If outdoor hot or cold air infiltrates your system, your HVAC struggles to maintain temperatures, raising energy costs and lowering comfort.

Overworked equipment also increases the likelihood of breakdowns and drives up repair costs. Proper duct sealing helps keep your HVAC system healthy over the long run, prolonging its lifespan and lowering continued maintenance needs.

Duct leaks can also allow the entry of dust, mold spores, moisture, and a range of contaminants into the duct system. This can escalate allergies, lower the overall air quality indoors, and lead to costly damage behind walls or ceilings over time.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC instructs that new homes incorporate fully sealed duct systems using high-efficiency materials, including mastic, foil tape, and insulation. But what should you do when leaks are located deep within your walls or ceilings?

Aerosol sealing technology (AeroSeal) can access interior duct leaks that are difficult to reach manually. To set up this method, all vents are sealed off except for a single access point. The HVAC system is isolated, and a machine is fitted to the duct system. It pressurizes the ducts and emits a fine aerosol sealant that fills tiny gaps and holes that standard sealing methods can’t access.

This method is effective for addressing small to medium leaks. However, larger holes still need manual sealing with mastic and tape. Technicians use before-and-after duct leakage tests to measure improvement and make sure the aerosol sealing process was successful.

Common Areas of Duct Leakage

The most common leakage area in duct systems is the joints. Ductwork involves numerous metal parts pressed together with tight fittings and metal bands, but these connections are almost never fully airtight.

As your HVAC system delivers heat and cooling across different seasons, the ducts constantly expand and contract. Over time, this movement makes joints shift and loosen, forming gaps and leaks — which is why a duct leakage test is advised for homes old and new in Elizabeth, NJ.

Many energy auditors verify duct leakage by feeling around the ducts and using a small tool to assess the opening size at the joints. If your duct system has not been properly sealed with mastic and approved tape, it’s very likely that leakage exists.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system is required to measure under 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet when it isn’t installed. For new construction, the duct leakage test must be passed prior to the home being approved for an occupancy certificate.

If your home in Elizabeth, NJ doesn’t pass its duct leakage evaluation, you’re likely paying more for temperature control — and contributing to long-term HVAC strain. Meeting the 3–4 CFM requirement is key not only for staying code-compliant but for maintaining energy efficiency and consistent comfort in your home.

Your technician will also advise you on the best ways to address leakage issues so you can pass the test, reduce utility bills, and enhance your home’s efficiency.

Local Energy Audits — affordable duct leakage test in Elizabeth, NJ

Local Energy Audits is proud to serve families and builders across Elizabeth, NJ and the surrounding local areas. We specialize in pinpointing duct leakage and energy inefficiencies using blower door tests and duct leakage tests. Whether you’re constructing a new house or upgrading your current one, we’re here for you.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by applying duct mask tape to seal every duct and register on both the supply and return sides.

After the registers are sealed, we mount the duct tester onto the unit or onto a main return.

The ducts are then set to a depressurized pressure of 25 Pascals. Once there, we use the nanometer to capture the leakage reading.

Schedule Your Duct Leakage Test in Elizabeth, NJ

Ensure your HVAC system remains efficient, code-compliant, and functioning optimally with skilled duct leakage test in Elizabeth, NJ. Whether you’re a homeowner increasing comfort or a contractor completing a necessary inspection, our certified team offers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and offer on-site guidance to help you pass your test, reduce energy waste, and protect the long-term health of your HVAC system.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Elizabeth, NJ with dependable and energy-efficient testing solutions.