Duct Leakage Test in Mahwah, NJ

Make sure your HVAC system is performing efficiently and meeting local standards with thorough duct leakage test in Mahwah, NJ. Our certified technicians find and measure ductwork air leaks, allowing homeowners and builders to improve indoor comfort, reduce energy waste, and satisfy state standards.

Why Duct Leakage Test is Important In Mahwah, NJ

States and municipalities now follow the 2015 IECC, International Energy Conservation Code for single-family residences, as well as the 2018 International Energy Conservation Code for multi-family structures. The change will result in several substantial implications for home builders and HVAC contractors engaged in work across the state. A Duct Leakage Test and a mandatory Blower Door Test are now required for all new construction or remodeled homes under the 2015 regulatory standards. Did you know that ducts are among the biggest contributors to air leakage in homes all across Pennsylvania, New Jersey, and Delaware? Leaked air can result in higher utility costs, extra load on your HVAC system, and dust and insulation traveling throughout your home. This makes duct leakage test beneficial for all homes, new or old. Keep reading to find out why duct leakage test is essential and how it can improve your home.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To kick off a duct leakage test in Mahwah, NJ, your technician will block all supply and return registers while keeping the main return or air handler accessible. A calibrated duct blaster is then secured to the opening. Its function is to depressurize the duct system, creating conditions that highlight any escaping air.

The duct blaster system, along with a precision pressure sensor, measures airflow and highlights leaks in the ductwork without inconveniencing you at home. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is rapid, clean, and performed without inconvenience to residents. Most tests in Mahwah, NJ take 30 to 60 minutes to complete, and the benefits to comfort and efficiency can endure for years.

How to Measure Duct Leakage

Duct leakage is determined in cubic feet per minute (CFM) for every 100 square feet of conditioned interior space. Your technician uses a nanometer to monitor tiny pressure fluctuations that indicate how much air is leaking through the ducts. Understanding this number helps you locate trouble spots, review possible upgrades, and see if your home complies with local energy code requirements in Mahwah, NJ.

Cost of Excessive Duct Leakage

If your utility bills keep climbing, temperatures vary from room to room, or your HVAC needs constant fixing, duct leakage may be the cause. According to ENERGY STAR, duct leakage causes homeowners to lose 20%–30% of their conditioned air on average. If outdoor hot or cold air infiltrates your system, your HVAC struggles to maintain temperatures, raising energy costs and lowering comfort.

Overworked equipment also produces more frequent issues that require costly repairs. Proper duct sealing helps uphold the long-term performance of your HVAC system, stretching its lifespan and decreasing routine maintenance demands.

Duct leaks can also allow dust, mold spores, excess moisture, and other contaminants into the duct system. This can negatively influence allergies, weaken indoor air quality, and lead to expensive long-term damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC sets a requirement that all new homes feature ducts sealed completely with modern materials like mastic, foil tape, and insulation. But what happens when leaks are hidden deep inside walls or ceilings?

Aerosol sealing technology (AeroSeal) gives technicians a way to reach concealed duct leaks without opening walls or ceilings. To carry out this method, every vent is sealed except a single access point. The HVAC system is separated, and a machine is attached to the duct system. It pressurizes the ducts and applies a fine aerosol sealant that fills tiny openings where standard sealing cannot reach.

This method is effective for addressing small to medium leaks. However, larger holes still need manual sealing with mastic and tape. Technicians do a duct leakage test before and after aerosol sealing to calculate how much leakage has been reduced and validate the results.

Common Areas of Duct Leakage

The most usual area for air leakage in ducts is at the joints. Ductwork includes various metal pieces pressed together using tight fittings and metal bands, but these connections are hardly ever airtight.

As your HVAC system regulates temperatures through the seasons, the ducts expand when heated and contract when cooled. Over time, this movement leads the joints to loosen, resulting in gaps and leaks — making a duct leakage test important for new and older homes in Mahwah, NJ.

Many energy auditors check duct leakage by feeling around the ducts and using a small tool to test the width of gaps between joints. If your duct system does not include sealing with mastic and approved tape, leakage is highly likely.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must read under 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet without the air handler. For new construction, no home can receive an occupancy certificate without first passing a duct leakage test.

If your home in Mahwah, NJ does not meet the duct leakage requirement, you’re likely paying elevated heating and cooling costs — and overburdening your HVAC system. Meeting the 3–4 CFM requirement is critical not just for code compliance, but also for defending your home’s comfort and energy performance.

Your technician will also provide expert strategies to address leakage concerns, helping you achieve a passing score, bring down utility bills, and boost home efficiency.

Local Energy Audits — affordable duct leakage test in Mahwah, NJ

Local Energy Audits proudly offers services throughout Mahwah, NJ and neighboring areas. We specialize in locating duct leakage and energy inefficiencies with our blower door and duct leakage tests. Whether it’s a new build or an existing home, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with technicians sealing all ducts and registers using duct mask tape on the supply and return sides.

After the registers are sealed, we attach the duct tester to either the unit itself or a main return.

The ducts are then set to a depressurized pressure of 25 Pascals. Once there, we use the nanometer to capture the leakage reading.

Schedule Your Duct Leakage Test in Mahwah, NJ

Ensure your HVAC system reaches optimal efficiency, satisfies code standards, and performs smoothly with expert duct leakage test in Mahwah, NJ. Whether you’re a homeowner aiming for better comfort or a contractor completing final approval, our certified team ensures fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and offer on-site expertise to help you pass your test, reduce unnecessary energy loss, and protect your HVAC system over the long term.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Mahwah, NJ with dependable and energy-efficient testing solutions.