Duct Leakage Test in Robbinsville, NJ

Make sure your HVAC system is performing efficiently and meeting local standards with thorough duct leakage test in Robbinsville, NJ. Our certified technicians measure and identify ductwork air leaks, assisting homeowners and builders in boosting comfort, limiting energy waste, and maintaining state compliance.

Why Duct Leakage Test is Important In Robbinsville, NJ

Across the country, states and municipalities enforce the 2015 IECC, International Energy Conservation Code for single-family buildings and the 2018 International Energy Conservation Code for multi-family buildings. The change will bring notable implications for home builders and HVAC contractors working throughout the state. A Duct Leakage Test and a mandatory Blower Door Test are now required for all new construction or remodeled homes under the 2015 regulatory standards. Did you know that duct leakage is one of the top reasons for air loss in homes in Pennsylvania, New Jersey, and Delaware? Leaked air can drive up your utility costs, tax your HVAC equipment, and circulate insulation debris and dust throughout your home. This makes duct leakage test important for all types of homes, whether new or old. Continue reading to learn why duct leakage test is essential and how you can benefit.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To initiate testing, your technician will seal all supply and return registers except for the main return or air handler during a duct leakage test in Robbinsville, NJ. A specially calibrated fan called a duct blaster is then connected to the opening. This fan depressurizes the duct system, making it easier to pinpoint exactly where air is leaking.

The duct blaster joins forces with a precision pressure sensor to monitor airflow and pinpoint leak points in the ducts without disturbing your home. A duct leakage test — sometimes called a duct blaster test — detects air loss in the duct system, allowing you to apply the most suitable sealing solutions.

duct leakage test is efficient, clean, and performed without bothering residents. Most tests in Robbinsville, NJ take 30 to 60 minutes to complete, and the benefits to comfort and efficiency can endure for years.

How to Measure Duct Leakage

Duct leakage is expressed in cubic feet per minute (CFM) per 100 square feet of the home’s conditioned area. Your technician uses a nanometer to read small pressure variations, helping determine the volume of air escaping through the ducts. Understanding this number enables you to recognize problem areas, consider efficiency improvements, and verify that your home meets local energy code requirements in Robbinsville, NJ.

Cost of Excessive Duct Leakage

If high utility expenses, irregular temperatures, or repeated HVAC troubles sound familiar, duct leakage might be the root cause. According to ENERGY STAR, the average duct system loses between 20% and 30% of its conditioned air due to leaks. Air entering from outside—whether warm or cold—makes your HVAC operate harder, causing energy costs to climb and comfort to decrease.

Overworked equipment also makes breakdowns more common and repairs more expensive. Proper duct sealing helps support your HVAC system’s long-term operation, increasing its lifespan and lowering frequent maintenance needs.

Duct leaks can also enable dust, mold spores, elevated moisture, and unwanted contaminants to infiltrate the duct system. This can worsen allergy conditions, affect indoor air quality, and result in costly damage forming behind walls or ceilings over time.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC specifies that newly constructed homes must use fully sealed duct systems with modern, efficient materials such as mastic, foil tape, and insulation. But what if the leaks are buried far inside your walls or ceilings?

Aerosol sealing technology (AeroSeal) helps target hard-to-reach openings deep within ducts. To conduct this method, all vents are blocked except for one access point. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and distributes an ultra-fine aerosol sealant to fill small gaps and holes that manual sealing methods can’t access.

This method is ideal for small to medium leaks. However, any large openings will still need manual sealing with mastic and tape. Technicians carry out a duct leakage test before and after aerosol sealing to assess how much leakage has improved and ensure the treatment was effective.

Common Areas of Duct Leakage

The most usual spot for duct air leakage is the joints. Ductwork is composed of various metal pieces pressed together using tight fittings and metal bands, but these seals are hardly ever fully airtight.

As your HVAC system adjusts temperatures throughout the year, the ducts go through expansion and contraction. Over time, this movement leads the joints to loosen, resulting in gaps and leaks — making a duct leakage test important for new and older homes in Robbinsville, NJ.

Many energy auditors look for leaks by feeling the ducts and using a small tool to evaluate how wide the gaps at the joints are. If your duct system wasn’t properly sealed using mastic and approved tape, air leakage is very likely occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system should stay under 4 CFM per 100 square feet with the air handler attached, or 3 CFM per 100 square feet without it. For new construction, obtaining an occupancy certificate requires passing a duct leakage test first.

If your home in Robbinsville, NJ does not meet duct leakage standards, you are likely overpaying for heating and cooling — and adding unnecessary strain to your HVAC equipment. Meeting the 3–4 CFM requirement is crucial not only for passing code but also for maintaining your home’s overall energy efficiency and comfort.

Your technician will also recommend effective ways to fix leakage issues so you can earn a passing score, save on utilities, and improve home performance.

Local Energy Audits — affordable duct leakage test in Robbinsville, NJ

Local Energy Audits proudly serves customers throughout Robbinsville, NJ and surrounding areas. We specialize in measuring duct leakage and energy inefficiencies using advanced blower door and duct leakage tests. Whether you’re building new or improving old, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with all ducts and registers being sealed using duct mask tape on the supply and return sides.

After the registers are sealed, we attach the duct tester directly to the unit or to one primary return.

The ducts are then brought down to 25 Pascals of pressure. With the ducts depressurized, the nanometer can be used to read the leakage level.

Schedule Your Duct Leakage Test in Robbinsville, NJ

Ensure your HVAC system stays efficient, compliant, and operating at peak performance with expert duct leakage test in Robbinsville, NJ. Whether you’re a homeowner aiming for better comfort or a contractor completing final approval, our certified team ensures fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and offer direct on-site guidance to help you pass your test, lower energy waste, and protect your HVAC system’s long-term health.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Robbinsville, NJ with dependable and energy-efficient testing solutions.