Duct Leakage Test in Edgewater, NJ

How a Duct Leakage Test Is Conducted

To begin performing a duct leakage test in Edgewater, NJ, your technician closes off all supply and return registers except the main return or air handler system. A specially calibrated fan known as a duct blaster is then put in place at the opening. It depressurizes the ductwork so escaping air can be accurately identified.

The duct blaster system, along with a precision pressure sensor, measures airflow and highlights leaks in the ductwork without inconveniencing you at home. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is efficient, mess-free, and completely non-intrusive for residents. Most tests in Edgewater, NJ require only 30 to 60 minutes, yet the upgrades can improve your home’s comfort and efficiency well into the future.

How to Measure Duct Leakage

Duct leakage is measured in cubic feet per minute (CFM) per 100 square feet of conditioned space. Your technician uses a nanometer to read small pressure variations, helping determine the volume of air escaping through the ducts. Understanding this number helps you recognize where issues exist, plan meaningful improvements, and check your home against local energy code requirements in Edgewater, NJ.

Cost of Excessive Duct Leakage

If you notice high energy costs, hot and cold spots, or ongoing HVAC repairs, duct leakage might be the underlying problem. According to ENERGY STAR, an average home’s ductwork loses 20% to 30% of conditioned air through leaks. Hot or cold air entering from outside increases the workload on your HVAC system, leading to higher energy bills and a drop in comfort.

Overworked equipment also creates more wear, leading to breakdowns and costly fixes. Proper duct sealing helps support your HVAC system’s long-term operation, increasing its lifespan and lowering frequent maintenance needs.

Duct leaks can also bring dust, mold spores, excess moisture, and other impurities into the duct system. This can worsen allergy flare-ups, reduce indoor air quality, and cause long-term structural deterioration behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC specifies that newly constructed homes must use fully sealed duct systems with modern, efficient materials such as mastic, foil tape, and insulation. But what if some leaks are hidden within the depths of your walls or ceilings?

Aerosol sealing technology (AeroSeal) makes it possible to seal leaks found deep within the ductwork. To use this method, technicians seal all vents except one access point. The HVAC system is isolated, and a machine is hooked up to the duct system. It pressurizes the ducts and releases a delicate aerosol sealant that settles into small gaps and holes traditional techniques can’t access.

This method performs well for small and medium leaks. However, larger openings typically require manual sealing with mastic and tape. Technicians test the ducts for leakage before and after aerosol sealing to determine the reduction level and verify success.

Common Areas of Duct Leakage

The most common place for ducts to leak air is through the joints. Ductwork is made of multiple metal pieces pressed together using tight fittings and metal bands, but these connections are rarely airtight.

As your HVAC system transitions between warm and cool air throughout the year, the ducts expand and contract. Over time, this movement causes the joints to loosen, creating gaps and leaks — which is why a duct leakage test is recommended for both new and older homes in Edgewater, NJ.

Many energy auditors test for duct leakage by feeling along the ducts and using a small tool to gauge how wide the gaps are at the joints. If your duct system lacks proper sealing with mastic and approved tape, there is a high chance that leakage is taking place.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system should fall under 4 CFM per 100 square feet with the air handler, or 3 CFM per 100 square feet when the air handler is absent. For new construction, the duct leakage test must be passed prior to the home being approved for an occupancy certificate.

If your home in Edgewater, NJ doesn’t achieve a passing duct leakage score, you’re likely overspending on heating and cooling — and putting extended strain on your HVAC unit. Meeting the 3–4 CFM requirement is needed not only for passing inspections, but also for improving home comfort and energy efficiency.

Your technician will also provide expert recommendations on how to address leakage issues so you can achieve a passing score, lower your utility bills, and improve your home’s overall performance.

Local Energy Audits — affordable duct leakage test in Edgewater, NJ

Local Energy Audits proudly helps clients across Edgewater, NJ and surrounding communities. We specialize in identifying and addressing duct leakage and energy inefficiencies using blower door tests and duct leakage tests. Whether you’re constructing a new home or optimizing an existing one, we’re here to help.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.