Duct Leakage Test in Ridgefield, NJ

How a Duct Leakage Test Is Conducted

To commence a duct leakage test in Ridgefield, NJ, your technician will seal every supply and return register except the primary return or air handler. A duct blaster, which is a specially calibrated fan, is then installed at the opening. The fan depressurizes the ducts, helping identify all points where air may be escaping.

The duct blaster joins forces with a precision pressure sensor to monitor airflow and pinpoint leak points in the ducts without disturbing your home. A duct leakage test — sometimes labeled as a duct blaster test — finds where your ducts are leaking air so you can decide on the best sealing strategy.

duct leakage test is rapid, clean, and performed without inconvenience to residents. Most tests in Ridgefield, NJ are completed in just 30 to 60 minutes, while the benefits to comfort and efficiency can last long-term.

How to Measure Duct Leakage

Duct leakage is calculated in cubic feet per minute (CFM) for every 100 square feet of conditioned space. Your technician uses a nanometer to pick up minor pressure shifts that indicate the level of air leakage within the ducts. Understanding this number allows you to highlight problem zones, explore improvement possibilities, and confirm compliance with local energy code requirements in Ridgefield, NJ.

Cost of Excessive Duct Leakage

If your home has elevated utility bills, temperature imbalances, or frequent HVAC service calls, duct leakage may be responsible. According to ENERGY STAR, the average duct system loses between 20% and 30% of its conditioned air due to leaks. Hot or cold outside air creeping into your system forces the HVAC to work inefficiently, increasing energy spending and reducing comfort.

Overworked equipment also leads to more breakdowns and costly repairs. Proper duct sealing helps strengthen the long-term function of your HVAC system, improving its lifespan and reducing ongoing maintenance costs.

Duct leaks can also introduce dust, mold spores, excess humidity, and other contaminants into the duct system. This can intensify allergy symptoms, harm indoor air quality, and cause long-term structural damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC enforces that new homes incorporate fully sealed ducts made with modern, energy-efficient materials including mastic, foil tape, and insulation. But what about leaks located deep within walls or ceilings?

Aerosol sealing technology (AeroSeal) allows technicians to seal leaks located inside inaccessible parts of ductwork. To implement this method, every vent is covered except one access point. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and releases a fine aerosolized sealant that fills small gaps and holes that traditional sealing methods cannot reach.

This method is extremely effective for sealing small to medium leaks. However, big gaps may still need manual sealing using mastic and tape. Technicians perform a duct leakage test both before and after aerosol sealing to determine how much leakage has decreased and confirm the treatment worked.

Common Areas of Duct Leakage

The most usual area for air leakage in ducts is at the joints. Ductwork includes various metal pieces pressed together using tight fittings and metal bands, but these connections are hardly ever airtight.

As your HVAC system heats and cools throughout the year, the ducts expand and contract. Over time, this movement causes joints to lose their seal, creating gaps and leaks — making a duct leakage test valuable for any home in Ridgefield, NJ, whether new or old.

Many energy auditors locate duct leakage by touching the ductwork and using a small tool to measure the width of separation between joints. If your duct system lacks proper sealing with mastic and approved tape, there is a high chance that leakage is taking place.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must show under 4 CFM per 100 square feet if the air handler is installed, or 3 CFM per 100 square feet if it is not. For new construction, obtaining an occupancy certificate requires passing a duct leakage test first.

If your home in Ridgefield, NJ does not pass a duct leakage test, you are likely paying more than necessary for heating and cooling — and placing long-term strain on your HVAC equipment. Meeting the 3–4 CFM requirement is necessary not only for meeting code standards but also for ensuring strong energy efficiency and indoor comfort.

Your technician will also provide expert recommendations on how to address leakage issues so you can achieve a passing score, lower your utility bills, and improve your home’s overall performance.

Local Energy Audits — affordable duct leakage test in Ridgefield, NJ

Local Energy Audits proudly supports customers throughout Ridgefield, NJ and the areas nearby. We specialize in measuring duct leakage and energy inefficiencies using advanced blower door and duct leakage tests. Whether you’re building new or improving old, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.