Duct Leakage Test in Carneys Point, NJ

Guarantee your HVAC system runs efficiently and adheres to local requirements with quality duct leakage test in Carneys Point, NJ. Our certified technicians evaluate and measure air leaks in duct systems, helping homeowners and builders enhance comfort, decrease energy loss, and comply with state rules.

Why Duct Leakage Test is Important In Carneys Point, NJ

Many states and municipalities oversee single-family buildings under the 2015 IECC, International Energy Conservation Code and multi-family buildings under the 2018 International Energy Conservation Code. The change will generate several impactful implications for home builders and HVAC contractors operating statewide. A Duct Leakage Test paired with a Blower Door Test is now expected for newly constructed and remodeled homes in accordance with the 2015 code requirements. Did you know that ducts are one of the primary sources of air leakage in homes throughout Pennsylvania, New Jersey, and Delaware? Leaked air can cause higher energy expenses, burden your HVAC system, and push dust and insulation into different areas of your home. This makes duct leakage test important for all types of homes, whether new or old. Continue reading to learn why duct leakage test is essential and how you can benefit.

What Our Clients Say

How a Duct Leakage Test Is Conducted

To prepare for a duct leakage test in Carneys Point, NJ, the technician seals every supply and return register, leaving only the main return or air handler unsealed. A calibrated duct blaster is then mounted to the opening. By depressurizing the duct system, it creates ideal conditions for detecting air leaks.

The duct blaster and its precision pressure sensor work together to measure airflow and detect duct leaks without causing any disruption in your home. A duct leakage test — often referred to as a duct blaster test — identifies air loss in your ducts, allowing you to find the most effective ways to seal them.

duct leakage test is efficient, clean, and performed without bothering residents. Most tests in Carneys Point, NJ are done within 30 to 60 minutes, with improvements that strengthen comfort and efficiency for years to come.

How to Measure Duct Leakage

Duct leakage is measured in cubic feet per minute (CFM) per 100 square feet of conditioned space. Your technician uses a nanometer to detect small pressure differences, which indicate how much air is leaking through the ducts. Understanding this number helps you locate trouble spots, review possible upgrades, and see if your home complies with local energy code requirements in Carneys Point, NJ.

Cost of Excessive Duct Leakage

If your home suffers from costly utility bills, uneven comfort levels, or persistent HVAC repairs, duct leakage may be contributing. According to ENERGY STAR, homes with leaky ducts routinely lose 20% to 30% of conditioned air. Hot or cold outdoor air infiltrating your system makes your HVAC system work overtime, which boosts energy costs and reduces comfort.

Overworked equipment also puts extra stress on the system, resulting in breakdowns and increased repair costs. Proper duct sealing helps support your HVAC system’s long-term operation, increasing its lifespan and lowering frequent maintenance needs.

Duct leaks can also allow dust, mold spores, moisture buildup, and multiple contaminants to enter the duct system. This can make allergies more severe, reduce the quality of indoor air, and produce costly structural harm behind walls or ceilings as time progresses.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC mandates fully sealed duct systems in new homes, made from energy-efficient materials like mastic, foil tape, and proper insulation. But what happens when leaks are hidden deep inside walls or ceilings?

Aerosol sealing technology (AeroSeal) allows technicians to seal leaks located inside inaccessible parts of ductwork. To start this method, all vents are blocked except for one access location. The HVAC system is isolated, and a machine is attached to the ducts. It pressurizes the ducts and emits a fine aerosolized sealant designed to fill small leaks unreachable with standard sealing.

This method is effective at treating small to medium leaks. However, big openings may still need to be addressed with manual mastic-and-tape sealing. Technicians use a duct leakage test before and after aerosol sealing to evaluate how much leakage has been lowered and verify the results.

Common Areas of Duct Leakage

The most frequent area where ducts lose air is at the joints. Ductwork consists of several metal sections pressed together with tight fittings and metal bands, yet these connections are almost never fully airtight.

As your HVAC system delivers heat and cooling across different seasons, the ducts constantly expand and contract. Over time, this movement causes the joints to loosen, opening gaps and leaks — making a duct leakage test beneficial for both new and older homes in Carneys Point, NJ.

Many energy auditors look for duct leakage by running their hands along the ducts and using a small tool to measure the width of gaps at the joints. If your duct system has not been sealed with mastic and approved tape, there is a high chance that leakage is occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system has to measure below 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet without the air handler. For new construction, a passing duct leakage test is essential before the home can qualify for an occupancy certificate.

If your home in Carneys Point, NJ does not pass its duct leakage inspection, you’re likely paying higher heating and cooling bills — and stressing your HVAC system over time. Meeting the 3–4 CFM requirement is vital not only for satisfying code rules but also for preserving your home’s comfort and energy performance.

Your technician will also provide expert strategies to address leakage concerns, helping you achieve a passing score, bring down utility bills, and boost home efficiency.

Local Energy Audits — affordable duct leakage test in Carneys Point, NJ

Local Energy Audits proudly covers Carneys Point, NJ and all nearby towns. We specialize in pinpointing duct leakage and energy inefficiencies using blower door tests and duct leakage tests. Whether you’re constructing a new house or upgrading your current one, we’re here for you.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with technicians sealing all ducts and registers using duct mask tape on the supply and return sides.

After the registers are sealed, we mount the duct tester onto the unit or onto a main return.

The ducts are then taken down to 25 Pascals. With the ducts depressurized, the nanometer is used to determine the leakage level.

Schedule Your Duct Leakage Test in Carneys Point, NJ

Ensure your HVAC system delivers maximum efficiency, full compliance, and top performance through professional duct leakage test in Carneys Point, NJ. Whether you’re a homeowner wanting better comfort or a contractor reaching the final inspection stage, our certified team provides fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and offer on-site expertise to help you pass your test, reduce unnecessary energy loss, and protect your HVAC system over the long term.

Serving homeowners, builders, and contractors across Carneys Point, NJ with dependable and energy-efficient testing solutions.