Duct Leakage Test in Emerson, NJ

Enhance your HVAC system’s efficiency and satisfy energy regulations through precise duct leakage test in Emerson, NJ. Our certified technicians identify and measure air leaks in ductwork to help homeowners and builders improve comfort, reduce energy waste, and achieve compliance with state requirements.

Why Duct Leakage Test is Important In Emerson, NJ

Many states and municipalities enforce the 2015 IECC, International Energy Conservation Code for single-family properties and the 2018 International Energy Conservation Code for multi-family developments. The change will set in motion important implications for home builders and HVAC contractors who operate in the state. A Duct Leakage Test and a Blower Door Test are now mandatory for newly built or renovated homes under the 2015 regulations. Did you know that ductwork is a major cause of air leakage in homes across Pennsylvania, New Jersey, and Delaware? Leaked air can raise utility expenses, overburden your HVAC system, and push insulation material and dust through every area of your home. This makes duct leakage test beneficial for all homes, new or old. Keep reading to find out why duct leakage test is essential and how it can improve your home.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To start the duct testing process in Emerson, NJ, the technician seals all supply and return registers except for the main return or the air handler. A calibrated duct blaster is then secured to the opening. Its function is to depressurize the duct system, creating conditions that highlight any escaping air.

The duct blaster, combined with a precision pressure sensor, measures airflow and detects leaks in the duct system without causing any disturbance in your home. A duct leakage test — sometimes called a duct blaster test — reveals where your ducts are losing air so you can determine the most effective sealing solutions.

duct leakage test is easy, clean, and unobtrusive for residents in the home. Most tests in Emerson, NJ take between 30 and 60 minutes, and the improvements they deliver can elevate comfort and efficiency for years ahead.

How to Measure Duct Leakage

Duct leakage is evaluated in cubic feet per minute (CFM) per 100 square feet of conditioned space inside the home. Your technician uses a nanometer to detect minimal pressure variations, revealing the amount of air leakage occurring in the duct system. Understanding this number helps you identify problem areas, evaluate potential improvements, and determine whether your home meets local energy code requirements in Emerson, NJ.

Cost of Excessive Duct Leakage

If you observe rising utility costs, temperature swings in different rooms, or regular HVAC breakdowns, duct leakage may be involved. According to ENERGY STAR, the average duct system loses between 20% and 30% of its conditioned air due to leaks. When outside hot or cold air seeps into your system, your HVAC must compensate, leading to higher energy costs and diminished comfort.

Overworked equipment also brings more system failures and higher repair expenses. Proper duct sealing helps promote the long-term integrity of your HVAC system, extending its lifespan and limiting continued maintenance needs.

Duct leaks can also pull in dust, mold spores, moisture, and numerous contaminants into the duct system. This can aggravate allergies, lower indoor air quality, and eventually lead to costly structural damage hidden behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC sets a requirement that all new homes feature ducts sealed completely with modern materials like mastic, foil tape, and insulation. But what if the leaks are buried far inside your walls or ceilings?

Aerosol sealing technology (AeroSeal) is an effective solution for reaching hidden ductwork leaks. To start this method, all vents are blocked except for one access location. The HVAC system is isolated, and a machine is attached to the ducts. It pressurizes the ducts and circulates a fine aerosolized sealant that locates and fills tiny leaks beyond the reach of typical sealing.

This method is ideal for small to medium leaks. However, any large openings will still need manual sealing with mastic and tape. Technicians test the ducts for leakage before and after aerosol sealing to determine the reduction level and verify success.

Common Areas of Duct Leakage

The most usual area for air leakage in ducts is at the joints. Ductwork includes various metal pieces pressed together using tight fittings and metal bands, but these connections are hardly ever airtight.

As your HVAC system operates in both heating and cooling modes year-round, the ducts continuously expand and contract. Over time, this movement weakens joint connections, producing gaps and leaks — making duct leakage test essential for both new and older homes in Emerson, NJ.

Many energy auditors test for duct leakage by feeling along the ducts and using a small tool to gauge how wide the gaps are at the joints. If your duct system was not sealed with mastic and approved tape, there’s a high likelihood that air is leaking.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system is required to measure under 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet when it isn’t installed. For new construction, a passing duct leakage test is essential before the home can qualify for an occupancy certificate.

If your home in Emerson, NJ cannot achieve a passing duct leakage score, you are likely wasting money on heating and cooling — and increasing wear on your HVAC system over time. Meeting the 3–4 CFM requirement is important not only for the inspector, but also for maximizing energy efficiency and comfort in your home.

Your technician will also offer professional recommendations to tackle leakage issues so you can secure a passing score, reduce utility costs, and strengthen home performance.

Local Energy Audits — affordable duct leakage test in Emerson, NJ

Local Energy Audits proudly serves customers throughout Emerson, NJ and surrounding areas. We specialize in detecting duct leakage and energy inefficiencies using blower door and duct leakage test. Whether you’re building new or enhancing your current home, we’re here to support you.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by applying duct mask tape to seal every duct and register on both the supply and return sides.

After the registers are sealed, we attach the duct tester directly to the unit or to one primary return.

The ducts are then depressurized to a Pascal of 25. With the ducts depressurized we can use the nanometer to get a reading of the duct leakage.

Schedule Your Duct Leakage Test in Emerson, NJ

Ensure your HVAC system continues to perform efficiently, meets compliance, and runs at its best with specialized duct leakage test in Emerson, NJ. Whether you’re a homeowner seeking better comfort or a contractor wrapping up a final inspection, our certified team delivers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and give on-site guidance to help you pass your test, minimize energy waste, and support the long-term health of your HVAC system.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Emerson, NJ with dependable and energy-efficient testing solutions.