Duct Leakage Test in Morris township, NJ

Ensure your HVAC system operates efficiently and meets local energy codes with professional duct leakage test in Morris township, NJ. Our certified technicians assess and measure air leaks in ducts to help homeowners and builders increase comfort, reduce energy inefficiencies, and ensure state compliance.

Why Duct Leakage Test is Important In Morris township, NJ

States and municipalities have put in place the 2015 IECC, International Energy Conservation Code for single-family projects and the 2018 International Energy Conservation Code for multi-family projects. The change will introduce meaningful implications for home builders and HVAC contractors active in the state. A Duct Leakage Test paired with a Blower Door Test is now expected for newly constructed and remodeled homes in accordance with the 2015 code requirements. Did you know that duct leakage is one of the most common issues affecting homes in Pennsylvania, New Jersey, and Delaware? Leaked air can raise your energy bills, strain your HVAC system, and spread insulation and dust throughout your home. This makes duct leakage test a key step for new and older homes alike. Read ahead to see why duct leakage test is needed and what advantages it offers.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To begin a duct leakage test in Morris township, NJ, your technician will seal off all supply and return registers except for the main return or the air handler. A specially calibrated duct blaster fan is then connected to the opening. This fan depressurizes the ducts to help locate where air is escaping.

The duct blaster, combined with a precision pressure sensor, measures airflow and detects leaks in the duct system without causing any disturbance in your home. A duct leakage test — also referred to as a duct blaster test — highlights where air is leaking from your ducts to help you choose the proper sealing method.

duct leakage test is prompt, clean, and does not interrupt residents’ activities. Most tests in Morris township, NJ take 30 to 60 minutes to complete, and the benefits to comfort and efficiency can endure for years.

How to Measure Duct Leakage

Duct leakage is defined in cubic feet per minute (CFM) per 100 square feet of conditioned space within the structure. Your technician uses a nanometer to detect minimal pressure variations, revealing the amount of air leakage occurring in the duct system. Understanding this number helps you spot leakage issues, evaluate corrective measures, and determine if your home is meeting local energy code requirements in Morris township, NJ.

Cost of Excessive Duct Leakage

If you’re struggling with expensive utility bills, inconsistent indoor temperatures, or continual HVAC problems, duct leakage might be the culprit. According to ENERGY STAR, the average duct system loses between 20% and 30% of its conditioned air due to leaks. If hot or cold air from outdoors enters your system, your HVAC works harder than necessary, causing energy costs to rise and comfort to fall.

Overworked equipment also puts extra stress on the system, resulting in breakdowns and increased repair costs. Proper duct sealing helps enhance the long-term resilience of your HVAC system, lengthening its lifespan and cutting overall maintenance needs.

Duct leaks can also allow dust, mold spores, excess moisture, and other contaminants into the duct system. This can negatively influence allergies, weaken indoor air quality, and lead to expensive long-term damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC instructs that new homes incorporate fully sealed duct systems using high-efficiency materials, including mastic, foil tape, and insulation. But what if leaks are concealed deep inside the structure of your walls or ceilings?

Aerosol sealing technology (AeroSeal) is used to address openings concealed inside duct systems. To perform the technique, all vents are sealed except a single access opening. The HVAC system is isolated, and a machine is hooked into the duct system. It pressurizes the ducts and releases a delicate aerosol sealant that settles into small gaps and holes traditional techniques can’t access.

This method handles small to medium leaks very effectively. However, large openings may still require traditional mastic and tape sealing. Technicians conduct a duct leakage test before and after aerosol sealing to measure how much the leakage has been reduced and ensure the treatment is successful.

Common Areas of Duct Leakage

The most frequent source of duct air leakage is the joints. Ductwork uses many metal pieces pressed together with tight fittings and metal bands, but these joining points are rarely airtight.

As your HVAC system operates in varying temperatures across the year, the ducts undergo expansion and contraction. Over time, this movement compromises the joints, forming gaps and leaks — which is exactly why duct leakage test is encouraged for new and older homes in Morris township, NJ.

Many energy auditors detect leaks by checking the duct surfaces by hand and using a small tool to measure joint gap width. If your duct system lacks proper sealing with mastic and approved tape, there is a high chance that leakage is taking place.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must read under 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet without the air handler. For new construction, no home can receive an occupancy certificate without first passing a duct leakage test.

If your home in Morris township, NJ doesn’t pass its duct leakage evaluation, you’re likely paying more for temperature control — and contributing to long-term HVAC strain. Meeting the 3–4 CFM requirement is required not only for code approval but for keeping your home efficient and comfortable.

Your technician will also offer specialized recommendations to repair leakage issues so you can meet passing requirements, reduce utility bills, and improve your home’s performance.

Local Energy Audits — affordable duct leakage test in Morris township, NJ

Local Energy Audits proudly provides service to homeowners and builders throughout Morris township, NJ and the surrounding region. We specialize in testing for duct leakage and energy inefficiencies using blower door and duct leakage methods. Whether you’re building from scratch or upgrading your home, we’re here to assist.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with the technician sealing all ducts and registers using duct mask tape across the supply and return sides.

After the registers are sealed, we connect the duct tester to the unit or to a main return.

The ducts are then depressurized to a level of 25 Pascals. Once depressurized, the nanometer provides an accurate duct leakage reading.

Schedule Your Duct Leakage Test in Morris township, NJ

Ensure your HVAC system delivers maximum efficiency, full compliance, and top performance through professional duct leakage test in Morris township, NJ. Whether you’re a homeowner seeking better comfort or a contractor wrapping up a final inspection, our certified team delivers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and give on-site guidance to help you pass your test, minimize energy waste, and support the long-term health of your HVAC system.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Morris township, NJ with dependable and energy-efficient testing solutions.