Duct Leakage Test in Saddle Brook township, NJ

How a Duct Leakage Test Is Conducted

To initiate testing, your technician will seal all supply and return registers except for the main return or air handler during a duct leakage test in Saddle Brook township, NJ. A duct blaster, which is a specially calibrated fan, is then installed at the opening. The fan depressurizes the ducts, helping identify all points where air may be escaping.

The duct blaster system, along with a precision pressure sensor, measures airflow and highlights leaks in the ductwork without inconveniencing you at home. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is prompt, clean, and does not interrupt residents’ activities. Most tests in Saddle Brook township, NJ are completed in just 30 to 60 minutes, while the benefits to comfort and efficiency can last long-term.

How to Measure Duct Leakage

Duct leakage is measured in cubic feet per minute (CFM) per 100 square feet of conditioned space. Your technician uses a nanometer to evaluate small pressure shifts that signal air escaping through the ducts. Understanding this number allows you to pinpoint problem areas, assess needed improvements, and confirm whether your home satisfies local energy code requirements in Saddle Brook township, NJ.

Cost of Excessive Duct Leakage

If you are experiencing high utility bills, uneven temperatures, or frequent HVAC repairs, duct leakage may be the cause. According to ENERGY STAR, many homes lose as much as 20% to 30% of conditioned air through duct leaks. Hot or cold outside air creeping into your system forces the HVAC to work inefficiently, increasing energy spending and reducing comfort.

Overworked equipment also accelerates wear and tear, resulting in more breakdowns and costly repairs. Proper duct sealing helps uphold the long-term performance of your HVAC system, stretching its lifespan and decreasing routine maintenance demands.

Duct leaks can also permit dust, mold spores, extra moisture, and other airborne contaminants into the duct system. This can make allergies worse, impact indoor air quality, and result in costly structural damage behind walls or ceilings as time passes.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC enforces that new homes incorporate fully sealed ducts made with modern, energy-efficient materials including mastic, foil tape, and insulation. But what should you do when leaks are located deep within your walls or ceilings?

Aerosol sealing technology (AeroSeal) is an effective solution for reaching hidden ductwork leaks. To set up this method, all vents are sealed off except for a single access point. The HVAC system is isolated, and a machine is fitted to the duct system. It pressurizes the ducts and emits a fine aerosol sealant that fills tiny gaps and holes that standard sealing methods can’t access.

This method is effective for addressing small to medium leaks. However, larger holes still need manual sealing with mastic and tape. Technicians complete a duct leakage test before and after aerosol sealing to track leakage reduction and confirm the treatment’s success.

Common Areas of Duct Leakage

The most usual spot for duct air leakage is the joints. Ductwork is composed of various metal pieces pressed together using tight fittings and metal bands, but these seals are hardly ever fully airtight.

As your HVAC system heats and cools throughout the year, the ducts expand and contract. Over time, this movement weakens joint connections, producing gaps and leaks — making duct leakage test essential for both new and older homes in Saddle Brook township, NJ.

Many energy auditors look for duct leakage by running their hands along the ducts and using a small tool to measure the width of gaps at the joints. If your duct system does not include sealing with mastic and approved tape, leakage is highly likely.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must measure under 4 CFM per 100 square feet with the air handler in place, or 3 CFM per 100 square feet if the air handler is not installed. For new construction, the home must pass a duct leakage test before qualifying for an occupancy certificate.

If your home in Saddle Brook township, NJ cannot pass a duct leakage test, you are likely wasting money on heating and cooling — and causing long-term wear on your HVAC system. Meeting the 3–4 CFM requirement is crucial not only for passing code but also for maintaining your home’s overall energy efficiency and comfort.

Your technician will also give expert suggestions on correcting leakage issues, allowing you to pass the test, lower utility expenses, and improve your home’s overall efficiency.

Local Energy Audits — affordable duct leakage test in Saddle Brook township, NJ

Local Energy Audits proudly works with clients throughout Saddle Brook township, NJ and nearby locations. We specialize in revealing duct leakage and energy inefficiencies through blower door and duct leakage test. Whether your project is new or existing, we’re here to assist.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.