Duct Leakage Test in Fieldsboro, NJ

Confirm your HVAC system’s efficiency and meet local inspection standards with professional duct leakage test in Fieldsboro, NJ. Our certified technicians identify and measure air leaks in ductwork to help homeowners and builders improve comfort, reduce energy waste, and achieve compliance with state requirements.

Why Duct Leakage Test is Important In Fieldsboro, NJ

Across many states and municipalities, the 2015 IECC, International Energy Conservation Code applies to single-family homes, while the 2018 International Energy Conservation Code governs multi-family buildings. The change will introduce meaningful implications for home builders and HVAC contractors active in the state. A Duct Leakage Test and the mandated Blower Door Test apply to all new or renovated homes under the 2015 regulations. Did you know that ducts are a significant source of air leakage in residential properties across Pennsylvania, New Jersey, and Delaware? Leaked air can result in higher utility costs, extra load on your HVAC system, and dust and insulation traveling throughout your home. This makes duct leakage test essential for both new and older homes. Continue reading to understand why duct leakage test matters and how it can benefit you.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To initiate testing, your technician will seal all supply and return registers except for the main return or air handler during a duct leakage test in Fieldsboro, NJ. A specially calibrated fan known as a duct blaster is then put in place at the opening. It depressurizes the ductwork so escaping air can be accurately identified.

The duct blaster uses a precision pressure sensor to monitor airflow and pinpoint leaks throughout the ductwork without interrupting your home environment. A duct leakage test — sometimes known as a duct blaster test — shows exactly where your ducts are leaking air so you can apply the right sealing fixes.

duct leakage test is swift, clean, and carried out with no disturbance to residents. Most tests in Fieldsboro, NJ are completed within 30 to 60 minutes, and the improvements can benefit your home’s comfort and efficiency for years.

How to Measure Duct Leakage

Duct leakage is rated in cubic feet per minute (CFM) per 100 square feet of the home’s conditioned zone. Your technician uses a nanometer to measure tiny pressure changes, revealing how much air is escaping through the ducts. Understanding this number helps you spot leakage issues, evaluate corrective measures, and determine if your home is meeting local energy code requirements in Fieldsboro, NJ.

Cost of Excessive Duct Leakage

If your home suffers from costly utility bills, uneven comfort levels, or persistent HVAC repairs, duct leakage may be contributing. According to ENERGY STAR, homes with leaky ducts routinely lose 20% to 30% of conditioned air. Air entering from outside—whether warm or cold—makes your HVAC operate harder, causing energy costs to climb and comfort to decrease.

Overworked equipment also contributes to repeated breakdowns and pricey repairs. Proper duct sealing helps improve the long-term health of your HVAC system, boosting longevity and reducing ongoing maintenance requirements.

Duct leaks can also allow dust, mold spores, excess moisture, and other contaminants into the duct system. This can worsen allergy flare-ups, reduce indoor air quality, and cause long-term structural deterioration behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires new homes to use fully sealed duct systems crafted from up-to-date, efficient materials such as mastic, foil tape, and insulation. But what if the leaks are buried far inside your walls or ceilings?

Aerosol sealing technology (AeroSeal) gives technicians a way to reach concealed duct leaks without opening walls or ceilings. To start this method, all vents are blocked except for one access location. The HVAC system is isolated, and a machine is attached to the ducts. It pressurizes the ducts and releases a fine aerosolized sealant that fills small gaps and holes that traditional sealing methods cannot reach.

This method is ideal for small to medium leaks. However, any large openings will still need manual sealing with mastic and tape. Technicians perform a duct leakage test both before and after aerosol sealing to determine how much leakage has decreased and confirm the treatment worked.

Common Areas of Duct Leakage

The most common point where ducts leak air is along the joints. Ductwork is made from multiple metal pieces pressed together with tight fittings and metal bands, but these connections are rarely completely airtight.

As your HVAC system changes between heating and cooling during the year, the ducts naturally expand and shrink. Over time, this movement shifts and loosens the joints, resulting in gaps and leaks — which is why all homes in Fieldsboro, NJ, new or older, benefit from duct leakage test.

Many energy auditors verify duct leakage by feeling around the ducts and using a small tool to assess the opening size at the joints. If your duct system wasn’t properly sealed using mastic and approved tape, air leakage is very likely occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system should fall under 4 CFM per 100 square feet with the air handler, or 3 CFM per 100 square feet when the air handler is absent. For new construction, a passing duct leakage test is essential before the home can qualify for an occupancy certificate.

If your home in Fieldsboro, NJ falls short in a duct leakage test, you are probably paying extra for heating and cooling — and placing lasting pressure on your HVAC equipment. Meeting the 3–4 CFM requirement is indispensable not only for compliance purposes but for ensuring strong comfort and energy savings.

Your technician will also offer specialized recommendations to repair leakage issues so you can meet passing requirements, reduce utility bills, and improve your home’s performance.

Local Energy Audits — affordable duct leakage test in Fieldsboro, NJ

Local Energy Audits proudly offers services throughout Fieldsboro, NJ and neighboring areas. We specialize in testing for duct leakage and energy inefficiencies using blower door and duct leakage methods. Whether you’re building from scratch or upgrading your home, we’re here to assist.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by taping off all ducts and registers with duct mask tape on the supply and return sides.

After the registers are sealed, we mount the duct tester onto the unit or onto a main return.

The ducts are then depressurized to 25 Pascals. With this pressure applied, we use the nanometer to measure how much leakage is present.

Schedule Your Duct Leakage Test in Fieldsboro, NJ

Ensure your HVAC system remains energy-efficient, code-approved, and performing at its highest capacity with professional duct leakage test in Fieldsboro, NJ. Whether you’re a homeowner looking for improved comfort or a contractor preparing for a final inspection, our certified team provides fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and offer on-site guidance to help you pass your test, improve energy efficiency, and safeguard your HVAC system’s long-term health.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Fieldsboro, NJ with dependable and energy-efficient testing solutions.