Duct Leakage Test in Mount Holly township, NJ

How a Duct Leakage Test Is Conducted

To kick off a duct leakage test in Mount Holly township, NJ, your technician will block all supply and return registers while keeping the main return or air handler accessible. A duct blaster — a precision-calibrated fan — is then fitted to the duct opening. By depressurizing the system, it makes all air leaks much easier to detect.

The duct blaster uses its precision pressure sensor partner to measure airflow and uncover duct leaks without causing any home disruption. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is quick, low-impact, and does not disturb residents. Most tests in Mount Holly township, NJ finish within 30 to 60 minutes, and the benefits to your home’s comfort and efficiency can last for years.

How to Measure Duct Leakage

Duct leakage is quantified in cubic feet per minute (CFM) for each 100 square feet of conditioned living space. Your technician uses a nanometer to identify pressure differences, which provide a clear picture of how much air is leaking from the ductwork. Understanding this number helps you uncover weak points, analyze opportunities for upgrades, and check whether your home follows local energy code requirements in Mount Holly township, NJ.

Cost of Excessive Duct Leakage

If you are experiencing high utility bills, uneven temperatures, or frequent HVAC repairs, duct leakage may be the cause. According to ENERGY STAR, the majority of homes lose 20% to 30% of conditioned air through duct leaks. When outdoor temperatures enter your system, the HVAC must work harder to compensate, resulting in higher energy costs and reduced comfort.

Overworked equipment also accelerates wear and tear, resulting in more breakdowns and costly repairs. Proper duct sealing helps protect and extend the long-term lifespan of your HVAC system, minimizing the need for repeated maintenance.

Duct leaks can also allow dust, mold spores, moisture buildup, and multiple contaminants to enter the duct system. This can worsen allergy flare-ups, reduce indoor air quality, and cause long-term structural deterioration behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC states that new homes must have duct systems sealed completely with energy-efficient products such as mastic, foil tape, and insulation. But what happens when air leaks are concealed deep in the walls or ceilings?

Aerosol sealing technology (AeroSeal) helps seal hard-to-find openings within the duct system. To execute this method, all vents are sealed shut except a single access point. The HVAC system is isolated, and a machine is attached to the duct network. It pressurizes the ducts and distributes a fine aerosolized sealant that seals small openings traditional methods cannot reach.

This method handles small to medium leaks very effectively. However, large openings may still require traditional mastic and tape sealing. Technicians conduct duct leakage test before and after aerosol sealing to see how much the leakage dropped and ensure the treatment worked properly.

Common Areas of Duct Leakage

The most frequent area where ducts lose air is at the joints. Ductwork consists of several metal sections pressed together with tight fittings and metal bands, yet these connections are almost never fully airtight.

As your HVAC system runs through seasonal heating and cooling, the ducts experience ongoing expansion and contraction. Over time, this movement causes the joints to loosen, creating gaps and leaks — which is why a duct leakage test is recommended for both new and older homes in Mount Holly township, NJ.

Many energy auditors examine duct leakage by touching the ducts and using a small tool to measure the gap width between joints. If your duct system does not include sealing with mastic and approved tape, leakage is highly likely.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system should come out under 4 CFM per 100 square feet in tests with the air handler, or 3 CFM per 100 square feet without the air handler. For new construction, a passing duct leakage test is mandatory before a home can be granted an occupancy certificate.

If your home in Mount Holly township, NJ cannot achieve a passing duct leakage score, you are likely wasting money on heating and cooling — and increasing wear on your HVAC system over time. Meeting the 3–4 CFM requirement is important not just for compliance, but for safeguarding your home’s comfort and long-term energy efficiency.

Your technician will also provide expert strategies to address leakage concerns, helping you achieve a passing score, bring down utility bills, and boost home efficiency.

Local Energy Audits — affordable duct leakage test in Mount Holly township, NJ

Local Energy Audits is honored to serve customers in Mount Holly township, NJ and all surrounding areas. We specialize in measuring duct leakage and energy inefficiencies using advanced blower door and duct leakage tests. Whether you’re building new or improving old, we’re here to help.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.