Duct Leakage Test in Mount Laurel township, NJ

Ensure proper HVAC performance and code compliance by scheduling professional duct leakage test in Mount Laurel township, NJ. Our certified technicians locate and assess air leaks in ductwork to help homeowners and builders improve comfort, reduce energy consumption, and comply with state regulations.

Why Duct Leakage Test is Important In Mount Laurel township, NJ

States and municipalities have standardized around the 2015 IECC, International Energy Conservation Code for single-family builds and the 2018 International Energy Conservation Code for multi-family builds. The change will set in motion important implications for home builders and HVAC contractors who operate in the state. A Duct Leakage Test along with the required Blower Door Test must now be conducted on any newly built or remodeled home as per the 2015 regulations. Did you know that ducts are responsible for a large share of air leakage issues in homes in Pennsylvania, New Jersey, and Delaware? Leaked air can spike your energy costs, wear down your HVAC system, and spread dust and insulation throughout various parts of your home. This makes duct leakage test critical for both modern and older homes. Continue reading to explore why duct leakage test is important and how you benefit from it.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To set up a duct leakage test in Mount Laurel township, NJ, the technician begins by sealing all supply and return registers, leaving only the air handler or main return open. A duct blaster — a precision-calibrated fan — is then fitted to the duct opening. By depressurizing the system, it makes all air leaks much easier to detect.

The duct blaster teams up with a precision pressure sensor to measure airflow accurately and locate duct leaks without affecting your home. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is prompt, clean, and does not interrupt residents’ activities. Most tests in Mount Laurel township, NJ are performed within 30 to 60 minutes, and the positive impact on comfort and efficiency can remain for years.

How to Measure Duct Leakage

Duct leakage is assessed using cubic feet per minute (CFM) per 100 square feet of conditioned space. Your technician uses a nanometer to identify pressure differences, which provide a clear picture of how much air is leaking from the ductwork. Understanding this number helps you spot leakage issues, evaluate corrective measures, and determine if your home is meeting local energy code requirements in Mount Laurel township, NJ.

Cost of Excessive Duct Leakage

If your energy bills are unusually high, your rooms feel unevenly heated or cooled, or your HVAC system needs frequent repairs, duct leakage could be the issue. According to ENERGY STAR, leaking ducts cause the average home to lose 20%–30% of conditioned air. When your system pulls in hot or cold outdoor air, the HVAC unit has to work harder, driving up energy usage and reducing comfort indoors.

Overworked equipment also creates more wear, leading to breakdowns and costly fixes. Proper duct sealing helps support your HVAC system’s long-term operation, increasing its lifespan and lowering frequent maintenance needs.

Duct leaks can also introduce dust, mold spores, excess humidity, and other contaminants into the duct system. This can aggravate allergies, lower indoor air quality, and eventually lead to costly structural damage hidden behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC states that new homes must have duct systems sealed completely with energy-efficient products such as mastic, foil tape, and insulation. But what about leaks that are hidden far behind walls or ceilings?

Aerosol sealing technology (AeroSeal) enables effective sealing of leaks hidden inside ducts. To initiate this method, technicians seal every vent except one access point. The HVAC system is isolated, and a machine is connected to the ductwork. It pressurizes the ducts and releases a fine aerosolized sealant that fills small gaps and holes that traditional sealing methods cannot reach.

This method is effective for addressing small to medium leaks. However, larger holes still need manual sealing with mastic and tape. Technicians test the ducts for leakage before and after aerosol sealing to determine the reduction level and verify success.

Common Areas of Duct Leakage

The most frequent point of air leakage in ductwork is the joints. Multiple metal parts are pressed together using tight fittings and metal bands, although these junctions are seldom airtight.

As your HVAC system transitions between warm and cool air throughout the year, the ducts expand and contract. Over time, this movement weakens joint connections, producing gaps and leaks — making duct leakage test essential for both new and older homes in Mount Laurel township, NJ.

Many energy auditors look for leaks by feeling the ducts and using a small tool to evaluate how wide the gaps at the joints are. If your duct system has not been sealed with mastic and approved tape, there is a high chance that leakage is occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must come in under 4 CFM per 100 square feet with the air handler, or 3 CFM per 100 square feet when the air handler is removed. For new construction, builders must ensure the home passes a duct leakage test before an occupancy certificate is granted.

If your home in Mount Laurel township, NJ fails its duct leakage test, you are likely facing inflated heating and cooling costs — along with increased strain on your HVAC system. Meeting the 3–4 CFM requirement is critical not just for code compliance, but also for defending your home’s comfort and energy performance.

Your technician will also offer expert guidance on fixing leakage problems so you can earn a passing score, reduce utility costs, and enhance your home’s overall performance.

Local Energy Audits — affordable duct leakage test in Mount Laurel township, NJ

Local Energy Audits proudly provides solutions to customers throughout Mount Laurel township, NJ and surrounding regions. We specialize in measuring duct leakage and energy inefficiencies using advanced blower door and duct leakage tests. Whether you’re building new or improving old, we’re here to help.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with the technician sealing all ducts and registers using duct mask tape across the supply and return sides.

After the registers are sealed, we attach the duct tester to either the unit itself or a main return.

The ducts are then set to a depressurized pressure of 25 Pascals. Once there, we use the nanometer to capture the leakage reading.

Schedule Your Duct Leakage Test in Mount Laurel township, NJ

Ensure your HVAC system achieves strong efficiency, full compliance, and dependable operation with precise duct leakage test in Mount Laurel township, NJ. Whether you’re a homeowner addressing comfort issues or a contractor completing the last inspection step, our certified team ensures fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and provide hands-on guidance to help you pass your test, reduce wasted energy, and ensure the long-term health of your HVAC system.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Mount Laurel township, NJ with dependable and energy-efficient testing solutions.