Duct Leakage Test in South Harrison township, NJ

How a Duct Leakage Test Is Conducted

To conduct a proper duct leakage test in South Harrison township, NJ, your technician first seals all supply and return registers except the main return or air handler. A specially calibrated duct blaster fan is then secured to the opening. Its job is to depressurize the duct system, allowing air leaks to reveal themselves clearly.

The duct blaster works in sync with a precision pressure sensor to assess airflow and find duct leaks without disturbing your living space. A duct leakage test — sometimes identified as a duct blaster test — shows where your ducts lose air, helping you plan the right sealing approach.

duct leakage test is easy, clean, and unobtrusive for residents in the home. Most tests in South Harrison township, NJ are performed within 30 to 60 minutes, and the positive impact on comfort and efficiency can remain for years.

How to Measure Duct Leakage

Duct leakage is calculated in cubic feet per minute (CFM) for every 100 square feet of conditioned space. Your technician uses a nanometer to evaluate small pressure shifts that signal air escaping through the ducts. Understanding this number helps you recognize where issues exist, plan meaningful improvements, and check your home against local energy code requirements in South Harrison township, NJ.

Cost of Excessive Duct Leakage

If you’re experiencing spikes in utility bills, uncomfortable temperature variations, or ongoing HVAC repair needs, duct leakage may be to blame. According to ENERGY STAR, many homes lose as much as 20% to 30% of conditioned air through duct leaks. If hot or cold air from outdoors enters your system, your HVAC works harder than necessary, causing energy costs to rise and comfort to fall.

Overworked equipment also leads to recurring breakdowns and higher repair expenses. Proper duct sealing helps support the long-term durability of your HVAC system, lengthening its lifespan and minimizing ongoing maintenance demands.

Duct leaks can also allow dust, mold spores, excess moisture, and other contaminants into the duct system. This can worsen allergy flare-ups, reduce indoor air quality, and cause long-term structural deterioration behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC calls for new homes to include duct systems that are completely sealed using efficient materials such as mastic, foil tape, and insulation. But what about leaks located deep within walls or ceilings?

Aerosol sealing technology (AeroSeal) enables effective sealing of leaks hidden inside ducts. To start this method, all vents are blocked except for one access location. The HVAC system is isolated, and a machine is attached to the ducts. It pressurizes the ducts and applies a fine aerosol sealant that fills tiny openings where standard sealing cannot reach.

This method handles small to medium leaks very effectively. However, large openings may still require traditional mastic and tape sealing. Technicians perform a duct leakage test both before and after aerosol sealing to determine how much leakage has decreased and confirm the treatment worked.

Common Areas of Duct Leakage

The most common leakage area in duct systems is the joints. Ductwork involves numerous metal parts pressed together with tight fittings and metal bands, but these connections are almost never fully airtight.

As your HVAC system transitions between warm and cool air throughout the year, the ducts expand and contract. Over time, this movement weakens the joints, creating gaps and leaks — a key reason duct leakage test is recommended for new and older homes in South Harrison township, NJ.

Many energy auditors inspect duct leakage by feeling the ducts and using a small tool to determine how wide the gaps are between joints. If your duct system isn’t sealed with mastic and approved tape, there’s a good chance that leaks are occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system has to measure below 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet without the air handler. For new construction, passing the duct leakage test is a necessary step before securing an occupancy certificate.

If your home in South Harrison township, NJ fails duct leakage test, you are probably spending unnecessarily on heating and cooling — and placing ongoing stress on your HVAC equipment. Meeting the 3–4 CFM requirement is important not just for compliance, but for safeguarding your home’s comfort and long-term energy efficiency.

Your technician will also recommend effective ways to fix leakage issues so you can earn a passing score, save on utilities, and improve home performance.

Local Energy Audits — affordable duct leakage test in South Harrison township, NJ

Local Energy Audits is honored to serve customers in South Harrison township, NJ and all surrounding areas. We specialize in detecting duct leakage and energy inefficiencies using blower door and duct leakage test. Whether you’re building new or enhancing your current home, we’re here to support you.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.