Duct Leakage Test in Bellefonte, DE

Maintain top HVAC efficiency and stay aligned with local energy codes using trusted duct leakage test in Bellefonte, DE. Our certified technicians pinpoint and measure ductwork air leaks, helping homeowners and builders boost comfort, cut energy waste, and meet state compliance standards.

Why Duct Leakage Test is Important In Bellefonte, DE

States and municipalities have adopted the 2015 IECC, International Energy Conservation Code for single-family buildings and the 2018 International Energy Conservation Code for multi-family buildings. The change will bring forward important implications for home builders and HVAC contractors working in the state. A Duct Leakage Test paired with a Blower Door Test is now expected for newly constructed and remodeled homes in accordance with the 2015 code requirements. Did you know that ductwork often causes some of the highest levels of air leakage in homes throughout Pennsylvania, New Jersey, and Delaware? Leaked air can escalate your energy costs, force your HVAC system to work harder, and move insulation and dust throughout your house. This makes duct leakage test a key step for new and older homes alike. Read ahead to see why duct leakage test is needed and what advantages it offers.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To start the duct testing process in Bellefonte, DE, the technician seals all supply and return registers except for the main return or the air handler. A specially calibrated duct blaster fan is then secured to the opening. Its job is to depressurize the duct system, allowing air leaks to reveal themselves clearly.

The duct blaster, aided by a precision pressure sensor, accurately measures airflow and reveals duct leaks without interrupting activities in your home. A duct leakage test — also referred to as a duct blaster test — highlights where air is leaking from your ducts to help you choose the proper sealing method.

duct leakage test is rapid, clean, and performed without inconvenience to residents. Most tests in Bellefonte, DE are done in about 30 to 60 minutes, and the resulting enhancements can support your home’s comfort and efficiency for many years.

How to Measure Duct Leakage

Duct leakage is specified in cubic feet per minute (CFM) for each 100 square feet of conditioned space. Your technician uses a nanometer to sense slight pressure changes, showing precisely how much air is escaping through the ductwork. Understanding this number helps you detect issues, explore potential fixes, and determine if your home aligns with local energy code requirements in Bellefonte, DE.

Cost of Excessive Duct Leakage

If you notice high energy costs, hot and cold spots, or ongoing HVAC repairs, duct leakage might be the underlying problem. According to ENERGY STAR, typical duct systems lose 20% to 30% of conditioned air through leaks. If outdoor hot or cold air infiltrates your system, your HVAC struggles to maintain temperatures, raising energy costs and lowering comfort.

Overworked equipment also causes components to fail more often, leading to costly repairs. Proper duct sealing helps safeguard the long-term reliability of your HVAC system, extending its lifespan and reducing how often maintenance is needed.

Duct leaks can also let in dust, mold spores, added moisture, and other harmful contaminants. This can worsen allergy flare-ups, reduce indoor air quality, and cause long-term structural deterioration behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires that all new homes feature fully sealed duct systems utilizing updated, energy-efficient materials like mastic, foil tape, and insulation. But what happens when air leaks are concealed deep in the walls or ceilings?

Aerosol sealing technology (AeroSeal) makes it possible to seal leaks found deep within the ductwork. To implement this method, every vent is covered except one access point. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and releases a fine sealant mist that finds and fills small holes that traditional sealing methods cannot access.

This method is highly effective for small to medium leaks. However, large openings may still require manual sealing with mastic and tape. Technicians do a duct leakage test before and after aerosol sealing to calculate how much leakage has been reduced and validate the results.

Common Areas of Duct Leakage

The most common leakage area in duct systems is the joints. Ductwork involves numerous metal parts pressed together with tight fittings and metal bands, but these connections are almost never fully airtight.

As your HVAC system cycles through heating and cooling each year, the ducts naturally expand and contract. Over time, this movement causes the joints to loosen, creating gaps and leaks — which is why a duct leakage test is recommended for both new and older homes in Bellefonte, DE.

Many energy auditors detect duct leakage by physically checking the ducts and using a small tool to assess the width of joint gaps. If your duct system hasn’t been finished with mastic and approved tape, leaks are highly likely.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must come in under 4 CFM per 100 square feet with the air handler, or 3 CFM per 100 square feet when the air handler is removed. For new construction, no home can receive an occupancy certificate without first passing a duct leakage test.

If your home in Bellefonte, DE does not pass its duct leakage inspection, you’re likely paying higher heating and cooling bills — and stressing your HVAC system over time. Meeting the 3–4 CFM requirement is necessary not only for meeting code standards but also for ensuring strong energy efficiency and indoor comfort.

Your technician will also share expert recommendations for fixing leakage problems, helping you achieve a passing score, save on utilities, and improve home performance.

Local Energy Audits — affordable duct leakage test in Bellefonte, DE

Local Energy Audits proudly serves homeowners, contractors, and builders throughout Bellefonte, DE and nearby regions. We specialize in identifying duct leakage and energy inefficiencies using blower door tests and duct leakage tests. Whether you’re building a new home or improving an existing one, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with technicians sealing all ducts and registers using duct mask tape on the supply and return sides.

After the registers are sealed, we mount the duct tester onto the unit or onto a main return.

The ducts are then lowered to a depressurized level of 25 Pascals. With the system at that pressure, the nanometer is used to read the duct leakage.

Schedule Your Duct Leakage Test in Bellefonte, DE

Ensure your HVAC system stays energy-efficient, fully compliant, and operating at peak performance with accurate duct leakage test in Bellefonte, DE. Whether you’re a homeowner optimizing comfort or a contractor completing mandatory inspections, our certified team ensures fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and supply on-site support to help you pass your test, curb energy waste, and maintain your HVAC system’s long-term performance.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Bellefonte, DE with dependable and energy-efficient testing solutions.