Duct Leakage Test in Bellmawr borough, NJ

Verify your HVAC system’s efficiency and meet local requirements with reliable duct leakage test in Bellmawr borough, NJ. Our certified technicians analyze and measure duct leaks to assist homeowners and builders in improving comfort, reducing energy waste, and fulfilling state requirements.

Why Duct Leakage Test is Important In Bellmawr borough, NJ

States and municipalities now follow the 2015 IECC, International Energy Conservation Code for single-family residences, as well as the 2018 International Energy Conservation Code for multi-family structures. The change will generate several impactful implications for home builders and HVAC contractors operating statewide. A Duct Leakage Test and a Blower Door Test are now mandatory for newly built or renovated homes under the 2015 regulations. Did you know that leaking ducts are a widespread cause of air loss in homes across Pennsylvania, New Jersey, and Delaware? Leaked air can raise utility expenses, overburden your HVAC system, and push insulation material and dust through every area of your home. This makes duct leakage test crucial for new and old homes alike. Keep reading to learn why duct leakage test is important and how you can benefit from them.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To initiate a duct leakage test in Bellmawr borough, NJ, your technician seals all supply and return registers, leaving only the main return or air handler open. A duct blaster, which is a specially calibrated fan, is then installed at the opening. The fan depressurizes the ducts, helping identify all points where air may be escaping.

The duct blaster, working hand in hand with a precision pressure sensor, measures airflow and identifies leaks in the ductwork without impacting your home. A duct leakage test — sometimes identified as a duct blaster test — shows where your ducts lose air, helping you plan the right sealing approach.

duct leakage test is efficient, clean, and performed without bothering residents. Most tests in Bellmawr borough, NJ are completed in roughly 30 to 60 minutes, and the resulting enhancements can support your home’s comfort and efficiency long-term.

How to Measure Duct Leakage

Duct leakage is measured using cubic feet per minute (CFM) per 100 square feet of conditioned floor area. Your technician uses a nanometer to detect minimal pressure variations, revealing the amount of air leakage occurring in the duct system. Understanding this number helps you locate trouble spots, review possible upgrades, and see if your home complies with local energy code requirements in Bellmawr borough, NJ.

Cost of Excessive Duct Leakage

If you’re experiencing spikes in utility bills, uncomfortable temperature variations, or ongoing HVAC repair needs, duct leakage may be to blame. According to ENERGY STAR, homes with leaky ducts routinely lose 20% to 30% of conditioned air. Hot or cold outdoor air infiltrating your system makes your HVAC system work overtime, which boosts energy costs and reduces comfort.

Overworked equipment also leads to recurring breakdowns and higher repair expenses. Proper duct sealing helps improve the long-term health of your HVAC system, boosting longevity and reducing ongoing maintenance requirements.

Duct leaks can also let dust, mold spores, moisture, and other pollutants enter the duct system. This can worsen allergy flare-ups, reduce indoor air quality, and cause long-term structural deterioration behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC outlines that new homes must be built with fully sealed duct systems, utilizing materials like mastic, foil tape, and insulation to enhance energy efficiency. But what happens when leaks are hidden deep inside walls or ceilings?

Aerosol sealing technology (AeroSeal) makes it possible to seal leaks found deep within the ductwork. To apply this method, every vent is sealed aside from one access point. The HVAC system is isolated, and a machine is connected to the ducts. It pressurizes the ducts and injects a fine aerosolized sealant that targets small holes and gaps unreachable by traditional sealing methods.

This method works very well for small to medium leaks. However, larger openings may still need to be sealed manually with mastic and tape. Technicians use a duct leakage test before and after aerosol sealing to evaluate how much leakage has been lowered and verify the results.

Common Areas of Duct Leakage

The most frequent point of air leakage in ductwork is the joints. Multiple metal parts are pressed together using tight fittings and metal bands, although these junctions are seldom airtight.

As your HVAC system warms and cools over the seasons, the ductwork expands and then contracts. Over time, this movement leads to joint loosening, generating gaps and leaks — a clear reason duct leakage test is recommended for new and older homes in Bellmawr borough, NJ.

Many energy auditors locate duct leakage by touching the ductwork and using a small tool to measure the width of separation between joints. If your duct system lacks proper sealing with mastic and approved tape, there is a high chance that leakage is taking place.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must come in under 4 CFM per 100 square feet with the air handler, or 3 CFM per 100 square feet when the air handler is removed. For new construction, obtaining an occupancy certificate requires passing a duct leakage test first.

If your home in Bellmawr borough, NJ doesn’t receive a passing duct leakage result, you are likely overpaying for heating and cooling — and putting significant long-term strain on your HVAC setup. Meeting the 3–4 CFM requirement is fundamental not only for code adherence but for boosting your home’s long-term efficiency and comfort.

Your technician will also share expert recommendations for fixing leakage problems, helping you achieve a passing score, save on utilities, and improve home performance.

Local Energy Audits — affordable duct leakage test in Bellmawr borough, NJ

Local Energy Audits is proud to serve customers across Bellmawr borough, NJ and the nearby communities. We specialize in measuring duct leakage and energy inefficiencies using advanced blower door and duct leakage tests. Whether you’re building new or improving old, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by ensuring all ducts and registers are sealed with duct mask tape on both the supply and return sides.

After the registers are sealed, we secure the duct tester to the HVAC unit or to a main return.

The ducts are then depressurized to exactly 25 Pascals. Once this is achieved, the nanometer is used to read the duct leakage.

Schedule Your Duct Leakage Test in Bellmawr borough, NJ

Ensure your HVAC system maintains top efficiency, remains compliant, and delivers strong performance with dependable duct leakage test in Bellmawr borough, NJ. Whether you’re a homeowner enhancing energy comfort or a contractor wrapping up the inspection process, our certified team offers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and deliver on-site help to ensure you pass your test, lower energy waste, and maintain your HVAC system’s long-term reliability.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Bellmawr borough, NJ with dependable and energy-efficient testing solutions.