Duct Leakage Test in Carneys Point, NJ

Ensure proper HVAC performance and code compliance by scheduling professional duct leakage test in Carneys Point, NJ. Our certified technicians identify and quantify air leaks in duct systems so homeowners and builders can optimize comfort, reduce energy waste, and meet state-level requirements.

Why Duct Leakage Test is Important In Carneys Point, NJ

Many states and municipalities enforce the 2015 IECC, International Energy Conservation Code for single-family properties and the 2018 International Energy Conservation Code for multi-family developments. The change will result in several substantial implications for home builders and HVAC contractors engaged in work across the state. A Duct Leakage Test plus a Blower Door Test are now compulsory in newly constructed or renovated homes according to the 2015 regulations. Did you know that ducts are a leading factor in home air leakage across Pennsylvania, New Jersey, and Delaware? Leaked air can push your energy bills higher, pressure your HVAC system, and spread dust and insulation inside your house. This makes duct leakage test an essential part of maintaining both new and older homes. Keep reading to discover why duct leakage test is important and how it can support your home.

What Our Clients Say

How a Duct Leakage Test Is Conducted

To prepare for a duct leakage test in Carneys Point, NJ, the technician seals every supply and return register, leaving only the main return or air handler unsealed. A duct blaster — a precision-calibrated fan — is then fitted to the duct opening. By depressurizing the system, it makes all air leaks much easier to detect.

The duct blaster works together with a precision pressure sensor to measure airflow and pinpoint leaks in the ductwork without disturbing your home. A duct leakage test — often referred to as a duct blaster test — identifies air loss in your ducts, allowing you to find the most effective ways to seal them.

duct leakage test is swift, clean, and carried out with no disturbance to residents. Most tests in Carneys Point, NJ finish within 30 to 60 minutes, and the benefits to your home’s comfort and efficiency can last for years.

How to Measure Duct Leakage

Duct leakage is defined in cubic feet per minute (CFM) per 100 square feet of conditioned space within the structure. Your technician uses a nanometer to register small pressure differences, which help calculate how much air is leaking from the ducts. Understanding this number allows you to pinpoint problem areas, assess needed improvements, and confirm whether your home satisfies local energy code requirements in Carneys Point, NJ.

Cost of Excessive Duct Leakage

If your energy bills are unusually high, your rooms feel unevenly heated or cooled, or your HVAC system needs frequent repairs, duct leakage could be the issue. According to ENERGY STAR, a large portion of homes lose between 20% and 30% of conditioned air due to leaky ducts. Air entering from outside—whether warm or cold—makes your HVAC operate harder, causing energy costs to climb and comfort to decrease.

Overworked equipment also brings more system failures and higher repair expenses. Proper duct sealing helps support the long-term durability of your HVAC system, lengthening its lifespan and minimizing ongoing maintenance demands.

Duct leaks can also introduce dust, mold spores, excess humidity, and other contaminants into the duct system. This can trigger more severe allergies, diminish indoor air quality, and create expensive structural problems behind walls or ceilings over time.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC ensures that new homes are built with duct systems sealed entirely using efficient materials such as mastic, foil tape, and insulation. But what if some leaks are hidden within the depths of your walls or ceilings?

Aerosol sealing technology (AeroSeal) is an effective solution for reaching hidden ductwork leaks. To perform the process, technicians seal all vents but leave one access point open. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and injects fine aerosol particles that seal tiny gaps and holes that typical sealing techniques miss.

This method works efficiently for small to medium leaks. However, larger gaps usually require manual sealing using mastic and tape. Technicians run leakage tests both before and after aerosol sealing to gauge how much air loss decreased and confirm proper results.

Common Areas of Duct Leakage

The most frequent area where ducts lose air is at the joints. Ductwork consists of several metal sections pressed together with tight fittings and metal bands, yet these connections are almost never fully airtight.

As your HVAC system shifts between hot and cold cycles all year long, the ductwork expands and contracts. Over time, this movement shifts and loosens the joints, resulting in gaps and leaks — which is why all homes in Carneys Point, NJ, new or older, benefit from duct leakage test.

Many energy auditors detect leaks by checking the duct surfaces by hand and using a small tool to measure joint gap width. If your duct system hasn’t been sealed with mastic and approved tape, there is a strong likelihood that leakage is happening.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system has to be under 4 CFM per 100 square feet when the air handler is in place, or 3 CFM per 100 square feet without it installed. For new construction, a passing duct leakage test is a required step before final occupancy certification can be awarded.

If your home in Carneys Point, NJ does not pass a duct leakage test, you are likely paying more than necessary for heating and cooling — and placing long-term strain on your HVAC equipment. Meeting the 3–4 CFM requirement is critical not just for code compliance, but also for defending your home’s comfort and energy performance.

Your technician will also give informed guidance on addressing leakage problems, enabling you to pass the test, reduce energy bills, and enhance your home’s performance.

Local Energy Audits — affordable duct leakage test in Carneys Point, NJ

Local Energy Audits is proud to serve customers across Carneys Point, NJ and the nearby communities. We specialize in evaluating duct leakage and energy inefficiencies with blower door and duct leakage tests. Whether you’re developing a new home or enhancing an older one, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by sealing all the ducts and registers with duct mask tape on both the supply and return side.

After the registers are sealed, we attach the duct tester directly to the unit or to one primary return.

The ducts are then depressurized to exactly 25 Pascals. Once this is achieved, the nanometer is used to read the duct leakage.

Schedule Your Duct Leakage Test in Carneys Point, NJ

Ensure your HVAC system maximizes efficiency, meets required standards, and performs consistently with thorough duct leakage test in Carneys Point, NJ. Whether you’re a homeowner improving home comfort or a contractor finishing required inspections, our certified team delivers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and offer on-site expertise to help you pass your test, reduce unnecessary energy loss, and protect your HVAC system over the long term.

Serving homeowners, builders, and contractors across Carneys Point, NJ with dependable and energy-efficient testing solutions.