Duct Leakage Test in Mount Olive, NJ

Ensure proper HVAC performance and code compliance by scheduling professional duct leakage test in Mount Olive, NJ. Our certified technicians measure and identify ductwork air leaks, assisting homeowners and builders in boosting comfort, limiting energy waste, and maintaining state compliance.

Why Duct Leakage Test is Important In Mount Olive, NJ

Across many states and municipalities, the 2015 IECC, International Energy Conservation Code applies to single-family homes, while the 2018 International Energy Conservation Code governs multi-family buildings. The change will introduce meaningful implications for home builders and HVAC contractors active in the state. A Duct Leakage Test together with a Blower Door Test has become mandatory for any newly constructed or remodeled home under the 2015 code. Did you know that ducts are responsible for a large share of air leakage issues in homes in Pennsylvania, New Jersey, and Delaware? Leaked air can elevate your energy bills, make your HVAC system work harder, and distribute insulation fibers and dust through your home. This makes duct leakage test a key step for new and older homes alike. Read ahead to see why duct leakage test is needed and what advantages it offers.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To start a duct leakage test in Mount Olive, NJ, the technician will close and seal every supply and return register except the main return or air handler. A calibrated duct blaster is then mounted to the opening. By depressurizing the duct system, it creates ideal conditions for detecting air leaks.

The duct blaster uses its precision pressure sensor partner to measure airflow and uncover duct leaks without causing any home disruption. A duct leakage test — often referred to as a duct blaster test — identifies air loss in your ducts, allowing you to find the most effective ways to seal them.

duct leakage test is fast, clean, and comfortable for residents throughout the process. Most tests in Mount Olive, NJ take only 30 to 60 minutes, yet the comfort and efficiency gains can last for years.

How to Measure Duct Leakage

Duct leakage is evaluated in cubic feet per minute (CFM) per 100 square feet of conditioned space inside the home. Your technician uses a nanometer to detect small pressure differences, which indicate how much air is leaking through the ducts. Understanding this number helps you spot leakage issues, evaluate corrective measures, and determine if your home is meeting local energy code requirements in Mount Olive, NJ.

Cost of Excessive Duct Leakage

If you are experiencing high utility bills, uneven temperatures, or frequent HVAC repairs, duct leakage may be the cause. According to ENERGY STAR, the average household loses 20%–30% of conditioned air because of leaking ducts. When outside hot or cold air seeps into your system, your HVAC must compensate, leading to higher energy costs and diminished comfort.

Overworked equipment also puts extra stress on the system, resulting in breakdowns and increased repair costs. Proper duct sealing helps support the long-term durability of your HVAC system, lengthening its lifespan and minimizing ongoing maintenance demands.

Duct leaks can also pull in dust, mold spores, moisture, and numerous contaminants into the duct system. This can worsen allergy reactions, negatively affect indoor air quality, and contribute to costly hidden structural damage over the years.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC mandates fully sealed duct systems in new homes, made from energy-efficient materials like mastic, foil tape, and proper insulation. But what if those leaks are tucked away behind walls or ceilings?

Aerosol sealing technology (AeroSeal) makes it possible to seal leaks found deep within the ductwork. To conduct this method, all vents are blocked except for one access point. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and distributes an ultra-fine aerosol sealant to fill small gaps and holes that manual sealing methods can’t access.

This method works best for small to medium leaks. However, large openings usually require traditional manual sealing using mastic and tape. Technicians test the ducts for leakage before and after aerosol sealing to determine the reduction level and verify success.

Common Areas of Duct Leakage

The most common leakage area in duct systems is the joints. Ductwork involves numerous metal parts pressed together with tight fittings and metal bands, but these connections are almost never fully airtight.

As your HVAC system heats and cools throughout the year, the ducts expand and contract. Over time, this movement weakens joint connections, producing gaps and leaks — making duct leakage test essential for both new and older homes in Mount Olive, NJ.

Many energy auditors locate duct leakage by touching the ductwork and using a small tool to measure the width of separation between joints. If your duct system wasn’t properly sealed using mastic and approved tape, air leakage is very likely occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system is required to measure under 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet when it isn’t installed. For new construction, a passing duct leakage test is mandatory before a home can be granted an occupancy certificate.

If your home in Mount Olive, NJ cannot achieve a passing duct leakage score, you are likely wasting money on heating and cooling — and increasing wear on your HVAC system over time. Meeting the 3–4 CFM requirement is crucial not only for passing code but also for maintaining your home’s overall energy efficiency and comfort.

Your technician will also share expert solutions for tackling leakage problems so you can pass the test, cut down utility expenses, and improve overall comfort and efficiency.

Local Energy Audits — affordable duct leakage test in Mount Olive, NJ

Local Energy Audits proudly provides service to homeowners and builders throughout Mount Olive, NJ and the surrounding region. We specialize in uncovering duct leakage and energy inefficiencies using both blower door tests and duct leakage tests. Whether you’re starting a new build or improving a current home, we’re here to assist.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by ensuring all ducts and registers are sealed with duct mask tape on both the supply and return sides.

After the registers are sealed, we connect the duct tester either to the HVAC unit itself or a central return.

The ducts are then reduced to a depressurized state of 25 Pascals. With them depressurized, the nanometer gives us the duct leakage reading.

Schedule Your Duct Leakage Test in Mount Olive, NJ

Ensure your HVAC system continues to perform efficiently, meets compliance, and runs at its best with specialized duct leakage test in Mount Olive, NJ. Whether you’re a homeowner enhancing energy comfort or a contractor wrapping up the inspection process, our certified team offers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and deliver on-site help to ensure you pass your test, lower energy waste, and maintain your HVAC system’s long-term reliability.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Mount Olive, NJ with dependable and energy-efficient testing solutions.