Duct Leakage Test in Park Ridge, NJ

Guarantee your HVAC system runs efficiently and adheres to local requirements with quality duct leakage test in Park Ridge, NJ. Our certified technicians identify and measure air leaks in ductwork to help homeowners and builders improve comfort, reduce energy waste, and achieve compliance with state requirements.

Why Duct Leakage Test is Important In Park Ridge, NJ

Across the country, states and municipalities enforce the 2015 IECC, International Energy Conservation Code for single-family buildings and the 2018 International Energy Conservation Code for multi-family buildings. The change will produce important implications for home builders and HVAC contractors functioning within the state. A Duct Leakage Test as well as the required Blower Door Test must now be performed on new or remodeled homes following the 2015 regulations. Did you know that ducts are responsible for a large share of air leakage issues in homes in Pennsylvania, New Jersey, and Delaware? Leaked air can drive up your utility costs, tax your HVAC equipment, and circulate insulation debris and dust throughout your home. This makes duct leakage test an important requirement for homes regardless of age. Keep reading to understand why duct leakage test is necessary and how it can help you.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To initiate testing, your technician will seal all supply and return registers except for the main return or air handler during a duct leakage test in Park Ridge, NJ. A calibrated duct blaster is then mounted to the opening. By depressurizing the duct system, it creates ideal conditions for detecting air leaks.

The duct blaster functions with a precision pressure sensor to analyze airflow and spot leaks in the duct system without affecting your home’s comfort. A duct leakage test — also called a duct blaster test — locates the points where duct air escapes, helping you implement the right sealing solution.

duct leakage test is quick, clean, and non-intrusive for residents. Most tests in Park Ridge, NJ take around 30 to 60 minutes, but the efficiency and comfort improvements can last for many years.

How to Measure Duct Leakage

Duct leakage is assessed using cubic feet per minute (CFM) per 100 square feet of conditioned space. Your technician uses a nanometer to read small pressure variations, helping determine the volume of air escaping through the ducts. Understanding this number allows you to highlight problem zones, explore improvement possibilities, and confirm compliance with local energy code requirements in Park Ridge, NJ.

Cost of Excessive Duct Leakage

If elevated utility bills, shifting temperatures, or repeated HVAC issues occur in your home, duct leakage may be the factor behind them. According to ENERGY STAR, the average home loses 20% to 30% of conditioned air through leaky ducts. When outdoor temperatures enter your system, the HVAC must work harder to compensate, resulting in higher energy costs and reduced comfort.

Overworked equipment also puts extra stress on the system, resulting in breakdowns and increased repair costs. Proper duct sealing helps uphold the long-term performance of your HVAC system, stretching its lifespan and decreasing routine maintenance demands.

Duct leaks can also let in dust, mold spores, added moisture, and other harmful contaminants. This can amplify allergy problems, impact air quality indoors, and slowly create costly structural damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires all newly constructed homes to have fully sealed ductwork with modern, energy-saving materials such as mastic, foil tape, and insulation. But what if some leaks are hidden within the depths of your walls or ceilings?

Aerosol sealing technology (AeroSeal) helps target hard-to-reach openings deep within ducts. To perform the process, technicians seal all vents but leave one access point open. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and releases a fine sealant mist that finds and fills small holes that traditional sealing methods cannot access.

This method is effective at treating small to medium leaks. However, big openings may still need to be addressed with manual mastic-and-tape sealing. Technicians test the ducts for leakage before and after aerosol sealing to determine the reduction level and verify success.

Common Areas of Duct Leakage

The most typical place for ducts to lose air is at the joints. Ductwork consists of different metal sections pressed together with tight fittings and metal bands, yet these joints are not usually airtight.

As your HVAC system heats and cools during seasonal changes, the ductwork expands and then contracts. Over time, this movement gradually loosens the joints, creating leaks and gaps — highlighting the importance of duct leakage test in both new and older homes in Park Ridge, NJ.

Many energy auditors investigate duct leakage by running their hands over the ducts and using a small tool to determine the width of joint gaps. If your duct system isn’t sealed with mastic and approved tape, there’s a good chance that leaks are occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system needs to register under 4 CFM per 100 square feet with the air handler attached, or 3 CFM per 100 square feet without it attached. For new construction, a duct leakage test must be successfully passed before the home can obtain an occupancy certificate.

If your home in Park Ridge, NJ does not meet the duct leakage requirement, you’re likely paying elevated heating and cooling costs — and overburdening your HVAC system. Meeting the 3–4 CFM requirement is critical not just for code compliance, but also for defending your home’s comfort and energy performance.

Your technician will also provide professional insights on resolving leakage issues so you can achieve a passing score, lower your utility costs, and optimize home performance.

Local Energy Audits — affordable duct leakage test in Park Ridge, NJ

Local Energy Audits is proud to serve families and builders across Park Ridge, NJ and the surrounding local areas. We specialize in diagnosing duct leakage and energy inefficiencies through blower door and duct leakage test. Whether your home is new or existing, we’re ready to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with duct mask tape being placed on all ducts and registers on both the supply and return sides.

After the registers are sealed, we hook the duct tester to the HVAC unit or a main return.

The ducts are then taken down to 25 Pascals. With the ducts depressurized, the nanometer is used to determine the leakage level.

Schedule Your Duct Leakage Test in Park Ridge, NJ

Ensure your HVAC system maintains top efficiency, remains compliant, and delivers strong performance with dependable duct leakage test in Park Ridge, NJ. Whether you’re a homeowner addressing comfort issues or a contractor completing the last inspection step, our certified team ensures fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and offer on-site guidance to help you pass your test, improve energy efficiency, and safeguard your HVAC system’s long-term health.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Park Ridge, NJ with dependable and energy-efficient testing solutions.