Duct Leakage Test in Pine Hill, NJ

Make sure your HVAC system is performing efficiently and meeting local standards with thorough duct leakage test in Pine Hill, NJ. Our certified technicians pinpoint and measure ductwork air leaks, helping homeowners and builders boost comfort, cut energy waste, and meet state compliance standards.

Why Duct Leakage Test is Important In Pine Hill, NJ

In many jurisdictions, the 2015 IECC, International Energy Conservation Code governs single-family buildings, while the 2018 IECC applies to multi-family buildings. The change will set in motion important implications for home builders and HVAC contractors who operate in the state. A Duct Leakage Test and a mandatory Blower Door Test are now required for all new construction or remodeled homes under the 2015 regulatory standards. Did you know that ductwork is a major cause of air leakage in homes across Pennsylvania, New Jersey, and Delaware? Leaked air can raise utility expenses, overburden your HVAC system, and push insulation material and dust through every area of your home. This makes duct leakage test an important requirement for homes regardless of age. Keep reading to understand why duct leakage test is necessary and how it can help you.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To conduct a proper duct leakage test in Pine Hill, NJ, your technician first seals all supply and return registers except the main return or air handler. A calibrated duct blaster is then secured to the opening. Its function is to depressurize the duct system, creating conditions that highlight any escaping air.

The duct blaster collaborates with a precision pressure sensor to evaluate airflow and locate leaks throughout the ductwork without disturbing your household. A duct leakage test — also referred to as a duct blaster test — highlights where air is leaking from your ducts to help you choose the proper sealing method.

duct leakage test is fast, clean, and comfortable for residents throughout the process. Most tests in Pine Hill, NJ require only 30 to 60 minutes, yet the upgrades can improve your home’s comfort and efficiency well into the future.

How to Measure Duct Leakage

Duct leakage is reported in cubic feet per minute (CFM) per 100 square feet of conditioned home area. Your technician uses a nanometer to detect small pressure differences, which indicate how much air is leaking through the ducts. Understanding this number allows you to highlight problem zones, explore improvement possibilities, and confirm compliance with local energy code requirements in Pine Hill, NJ.

Cost of Excessive Duct Leakage

If your home suffers from costly utility bills, uneven comfort levels, or persistent HVAC repairs, duct leakage may be contributing. According to ENERGY STAR, the average household loses 20%–30% of conditioned air because of leaking ducts. Outside hot or cold air leaking into your system puts extra strain on your HVAC unit, raising energy bills and decreasing comfort.

Overworked equipment also produces more frequent issues that require costly repairs. Proper duct sealing helps enhance the long-term resilience of your HVAC system, lengthening its lifespan and cutting overall maintenance needs.

Duct leaks can also permit dust, mold spores, extra moisture, and other airborne contaminants into the duct system. This can intensify allergy symptoms, harm indoor air quality, and cause long-term structural damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC instructs that new homes incorporate fully sealed duct systems using high-efficiency materials, including mastic, foil tape, and insulation. But what if the problem areas are buried deep within the walls or ceilings?

Aerosol sealing technology (AeroSeal) is designed to reach and seal hidden gaps throughout the duct system. To carry out the procedure, technicians seal off all vents except one access point. The HVAC system is isolated, and a machine is linked to the duct system. It pressurizes the ducts and applies a fine aerosol sealant that fills tiny openings where standard sealing cannot reach.

This method handles small to medium leaks very effectively. However, large openings may still require traditional mastic and tape sealing. Technicians run a duct leakage test before and after aerosol sealing to quantify the reduction in leakage and verify the success of the process.

Common Areas of Duct Leakage

The most common place for ducts to leak air is through the joints. Ductwork is made of multiple metal pieces pressed together using tight fittings and metal bands, but these connections are rarely airtight.

As your HVAC system moves through annual heating and cooling cycles, the ductwork expands and then contracts. Over time, this movement compromises the joints, forming gaps and leaks — which is exactly why duct leakage test is encouraged for new and older homes in Pine Hill, NJ.

Many energy auditors investigate duct leakage by running their hands over the ducts and using a small tool to determine the width of joint gaps. If your duct system has not received sealing with mastic and approved tape, leakage is very probable.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system should fall under 4 CFM per 100 square feet with the air handler, or 3 CFM per 100 square feet when the air handler is absent. For new construction, a passing duct leakage test is a required step before final occupancy certification can be awarded.

If your home in Pine Hill, NJ does not pass a duct leakage test, you are likely paying more than necessary for heating and cooling — and placing long-term strain on your HVAC equipment. Meeting the 3–4 CFM requirement matters not only for code compliance, but also for protecting your home’s comfort and reducing energy waste.

Your technician will also provide expert recommendations on how to address leakage issues so you can achieve a passing score, lower your utility bills, and improve your home’s overall performance.

Local Energy Audits — affordable duct leakage test in Pine Hill, NJ

Local Energy Audits proudly serves homeowners, contractors, and builders throughout Pine Hill, NJ and nearby regions. We specialize in identifying duct leakage and energy inefficiencies using blower door tests and duct leakage tests. Whether you’re building a new home or improving an existing one, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins with all the ducts and registers sealed tightly using duct mask tape on both sides—supply and return.

After the registers are sealed, we hook the duct tester to the HVAC unit or a main return.

The ducts are then lowered to a depressurized level of 25 Pascals. With the system at that pressure, the nanometer is used to read the duct leakage.

Schedule Your Duct Leakage Test in Pine Hill, NJ

Ensure your HVAC system delivers maximum efficiency, full compliance, and top performance through professional duct leakage test in Pine Hill, NJ. Whether you’re a homeowner focused on improving comfort or a contractor finalizing inspection requirements, our certified team delivers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and supply on-site support to help you pass your test, curb energy waste, and maintain your HVAC system’s long-term performance.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Pine Hill, NJ with dependable and energy-efficient testing solutions.