Duct Leakage Test in Ridgefield Park, NJ

Improve HVAC performance and ensure energy code compliance with dependable duct leakage test in Ridgefield Park, NJ. Our certified technicians measure and identify ductwork air leaks, assisting homeowners and builders in boosting comfort, limiting energy waste, and maintaining state compliance.

Why Duct Leakage Test is Important In Ridgefield Park, NJ

In many jurisdictions, the 2015 IECC, International Energy Conservation Code governs single-family buildings, while the 2018 IECC applies to multi-family buildings. The change will create considerable implications for home builders and HVAC contractors carrying out projects in the state. A Duct Leakage Test together with a Blower Door Test must now be performed in all newly built or remodeled homes to comply with the 2015 regulations. Did you know that ducts are frequently the biggest contributors to home air loss in Pennsylvania, New Jersey, and Delaware? Leaked air can increase monthly energy costs, stress your HVAC system, and scatter dust and insulation across your living areas. This makes duct leakage test essential for both new and older homes. Continue reading to understand why duct leakage test matters and how it can benefit you.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To begin a duct leakage test in Ridgefield Park, NJ, your technician will seal off all supply and return registers except for the main return or the air handler. A specially calibrated fan known as a duct blaster is then put in place at the opening. It depressurizes the ductwork so escaping air can be accurately identified.

The duct blaster functions with a precision pressure sensor to analyze airflow and spot leaks in the duct system without affecting your home’s comfort. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is fast, debris-free, and completely resident-friendly. Most tests in Ridgefield Park, NJ take between 30 and 60 minutes, and the improvements they deliver can elevate comfort and efficiency for years ahead.

How to Measure Duct Leakage

Duct leakage is monitored in cubic feet per minute (CFM) per 100 square feet of the conditioned sections of the home. Your technician uses a nanometer to register small pressure differences, which help calculate how much air is leaking from the ducts. Understanding this number helps you uncover weak points, analyze opportunities for upgrades, and check whether your home follows local energy code requirements in Ridgefield Park, NJ.

Cost of Excessive Duct Leakage

If you’re experiencing spikes in utility bills, uncomfortable temperature variations, or ongoing HVAC repair needs, duct leakage may be to blame. According to ENERGY STAR, most homes lose 20% to 30% of their conditioned air through leaking ductwork. Outside hot or cold air leaking into your system puts extra strain on your HVAC unit, raising energy bills and decreasing comfort.

Overworked equipment also brings more system failures and higher repair expenses. Proper duct sealing helps keep your HVAC system healthy over the long run, prolonging its lifespan and lowering continued maintenance needs.

Duct leaks can also let in dust, mold spores, added moisture, and other harmful contaminants. This can make allergies worse, impact indoor air quality, and result in costly structural damage behind walls or ceilings as time passes.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC mandates fully sealed duct systems in new homes, made from energy-efficient materials like mastic, foil tape, and proper insulation. But what if some leaks are hidden within the depths of your walls or ceilings?

Aerosol sealing technology (AeroSeal) reaches interior duct leaks that traditional sealing methods can’t access. To apply this method, every vent is sealed aside from one access point. The HVAC system is isolated, and a machine is connected to the ducts. It pressurizes the ducts and emits a fine aerosolized sealant designed to fill small leaks unreachable with standard sealing.

This method seals small to medium leaks effectively. However, large gaps may still call for manual sealing using mastic and tape. Technicians use a duct leakage test before and after aerosol sealing to evaluate how much leakage has been lowered and verify the results.

Common Areas of Duct Leakage

The most common leakage area in duct systems is the joints. Ductwork involves numerous metal parts pressed together with tight fittings and metal bands, but these connections are almost never fully airtight.

As your HVAC system moves through annual heating and cooling cycles, the ductwork expands and then contracts. Over time, this movement causes joints to lose their seal, creating gaps and leaks — making a duct leakage test valuable for any home in Ridgefield Park, NJ, whether new or old.

Many energy auditors examine duct leakage by touching the ducts and using a small tool to measure the gap width between joints. If your duct system is unsealed with mastic and approved tape, air leakage is almost certainly occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must measure under 4 CFM per 100 square feet with the air handler in place, or 3 CFM per 100 square feet if the air handler is not installed. For new construction, a duct leakage test must be successfully passed before the home can obtain an occupancy certificate.

If your home in Ridgefield Park, NJ doesn’t achieve a passing duct leakage score, you’re likely overspending on heating and cooling — and putting extended strain on your HVAC unit. Meeting the 3–4 CFM requirement is essential not only for following building code, but for keeping your home comfortable and energy-efficient.

Your technician will also give professional advice on resolving leakage issues to help you achieve a passing score, cut down utility bills, and boost your home’s performance.

Local Energy Audits — affordable duct leakage test in Ridgefield Park, NJ

Local Energy Audits proudly provides solutions to customers throughout Ridgefield Park, NJ and surrounding regions. We specialize in detecting duct leakage and energy inefficiencies using blower door and duct leakage test. Whether you’re building new or enhancing your current home, we’re here to support you.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by taping off all ducts and registers with duct mask tape on the supply and return sides.

After the registers are sealed, we attach the duct tester directly to the unit or to one primary return.

The ducts are then depressurized to 25 Pascals. With this pressure applied, we use the nanometer to measure how much leakage is present.

Schedule Your Duct Leakage Test in Ridgefield Park, NJ

Ensure your HVAC system reaches optimal efficiency, satisfies code standards, and performs smoothly with expert duct leakage test in Ridgefield Park, NJ. Whether you’re a homeowner looking for improved comfort or a contractor preparing for a final inspection, our certified team provides fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and supply on-site guidance to help you pass your test, reduce energy loss, and maintain the long-term health of your HVAC system.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Ridgefield Park, NJ with dependable and energy-efficient testing solutions.