Duct Leakage Test in Somers Point, NJ

How a Duct Leakage Test Is Conducted

To begin performing a duct leakage test in Somers Point, NJ, your technician closes off all supply and return registers except the main return or air handler system. A duct blaster fan, carefully calibrated for accuracy, is then attached to the duct opening. It depressurizes the ductwork, allowing leaks to become more noticeable.

The duct blaster and its precision pressure sensor work together to measure airflow and detect duct leaks without causing any disruption in your home. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is fast, clean, and comfortable for residents throughout the process. Most tests in Somers Point, NJ require only 30 to 60 minutes, yet the upgrades can improve your home’s comfort and efficiency well into the future.

How to Measure Duct Leakage

Duct leakage is defined in cubic feet per minute (CFM) per 100 square feet of conditioned space within the structure. Your technician uses a nanometer to identify pressure differences, which provide a clear picture of how much air is leaking from the ductwork. Understanding this number helps you uncover weak points, analyze opportunities for upgrades, and check whether your home follows local energy code requirements in Somers Point, NJ.

Cost of Excessive Duct Leakage

If your energy bills are unusually high, your rooms feel unevenly heated or cooled, or your HVAC system needs frequent repairs, duct leakage could be the issue. According to ENERGY STAR, duct leakage causes homeowners to lose 20%–30% of their conditioned air on average. Air from outside—whether hot or cold—entering your system forces your HVAC to work harder, increasing utility bills and reducing indoor comfort.

Overworked equipment also heightens the chance of system failures and expensive repairs. Proper duct sealing helps support your HVAC system’s long-term operation, increasing its lifespan and lowering frequent maintenance needs.

Duct leaks can also let dust, mold spores, moisture, and other pollutants enter the duct system. This can increase allergy discomfort, degrade indoor air quality, and eventually cause expensive structural issues behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC specifies that newly constructed homes must use fully sealed duct systems with modern, efficient materials such as mastic, foil tape, and insulation. But what if the problem areas are buried deep within the walls or ceilings?

Aerosol sealing technology (AeroSeal) is an effective solution for reaching hidden ductwork leaks. To carry out the procedure, technicians seal off all vents except one access point. The HVAC system is isolated, and a machine is linked to the duct system. It pressurizes the ducts and pushes a fine aerosol sealant through them, sealing small holes that ordinary sealing methods can’t reach.

This method is ideal for small to medium leaks. However, any large openings will still need manual sealing with mastic and tape. Technicians carry out a duct leakage test before and after aerosol sealing to assess how much leakage has improved and ensure the treatment was effective.

Common Areas of Duct Leakage

The most common point where ducts leak air is along the joints. Ductwork is made from multiple metal pieces pressed together with tight fittings and metal bands, but these connections are rarely completely airtight.

As your HVAC system heats and cools throughout the year, the ducts expand and contract. Over time, this movement weakens the joints, creating gaps and leaks — a key reason duct leakage test is recommended for new and older homes in Somers Point, NJ.

Many energy auditors look for duct leakage by running their hands along the ducts and using a small tool to measure the width of gaps at the joints. If your duct system is unsealed with mastic and approved tape, air leakage is almost certainly occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system needs to be under 4 CFM per 100 square feet when the air handler is installed, or 3 CFM per 100 square feet when it isn’t. For new construction, obtaining an occupancy certificate requires passing a duct leakage test first.

If your home in Somers Point, NJ doesn’t pass its duct leakage evaluation, you’re likely paying more for temperature control — and contributing to long-term HVAC strain. Meeting the 3–4 CFM requirement is important not only for the inspector, but also for maximizing energy efficiency and comfort in your home.

Your technician will also give informed guidance on addressing leakage problems, enabling you to pass the test, reduce energy bills, and enhance your home’s performance.

Local Energy Audits — affordable duct leakage test in Somers Point, NJ

Local Energy Audits proudly serves homeowners, contractors, and builders throughout Somers Point, NJ and nearby regions. We specialize in detecting duct leakage and reducing energy inefficiencies using blower door and duct leakage test. Whether you’re creating a new home or improving an existing one, we’re here to assist.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.