Duct Leakage Test in South Plainfield borough, NJ

Ensure your HVAC system is sealed, efficient, and fully compliant with local regulations through duct leakage test in South Plainfield borough, NJ. Our certified technicians pinpoint and measure ductwork air leaks, helping homeowners and builders boost comfort, cut energy waste, and meet state compliance standards.

Why Duct Leakage Test is Important In South Plainfield borough, NJ

States and municipalities have put in place the 2015 IECC, International Energy Conservation Code for single-family projects and the 2018 International Energy Conservation Code for multi-family projects. The change will present notable implications for home builders and HVAC contractors active throughout the state. A Duct Leakage Test together with a Blower Door Test must now be performed in all newly built or remodeled homes to comply with the 2015 regulations. Did you know that ducts are a leading factor in home air leakage across Pennsylvania, New Jersey, and Delaware? Leaked air can result in higher utility costs, extra load on your HVAC system, and dust and insulation traveling throughout your home. This makes duct leakage test an important requirement for homes regardless of age. Keep reading to understand why duct leakage test is necessary and how it can help you.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To kick off a duct leakage test in South Plainfield borough, NJ, your technician will block all supply and return registers while keeping the main return or air handler accessible. A specially calibrated fan known as a duct blaster is then put in place at the opening. It depressurizes the ductwork so escaping air can be accurately identified.

The duct blaster teams up with a precision pressure sensor to measure airflow accurately and locate duct leaks without affecting your home. A duct leakage test — sometimes known as a duct blaster test — shows exactly where your ducts are leaking air so you can apply the right sealing fixes.

duct leakage test is straightforward, clean, and designed to be non-intrusive for residents. Most tests in South Plainfield borough, NJ finish in 30 to 60 minutes, and the upgrades continue benefiting your home’s comfort and efficiency long after.

How to Measure Duct Leakage

Duct leakage is tracked in cubic feet per minute (CFM) per 100 square feet of conditioned living area. Your technician uses a nanometer to identify subtle pressure differences, helping determine how much air is leaking from the ducts. Understanding this number helps you reveal problem areas, consider enhancement strategies, and validate that your home meets local energy code requirements in South Plainfield borough, NJ.

Cost of Excessive Duct Leakage

If you’re struggling with expensive utility bills, inconsistent indoor temperatures, or continual HVAC problems, duct leakage might be the culprit. According to ENERGY STAR, duct leakage causes homeowners to lose 20%–30% of their conditioned air on average. Outside air that’s too hot or too cold entering your system strains your HVAC, resulting in higher energy consumption and less comfort.

Overworked equipment also results in more frequent breakdowns and expensive repair bills. Proper duct sealing helps maintain the long-term health of your HVAC system, extending its lifespan and reducing ongoing maintenance needs.

Duct leaks can also introduce dust, mold spores, excess humidity, and other contaminants into the duct system. This can irritate allergies, harm the air quality inside, and cause expensive hidden structural damage as time goes on.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC calls for new homes to include duct systems that are completely sealed using efficient materials such as mastic, foil tape, and insulation. But what about leaks located deep within walls or ceilings?

Aerosol sealing technology (AeroSeal) is used to address openings concealed inside duct systems. To conduct this method, all vents are blocked except for one access point. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and emits a fine aerosolized sealant designed to fill small leaks unreachable with standard sealing.

This method is effective at treating small to medium leaks. However, big openings may still need to be addressed with manual mastic-and-tape sealing. Technicians perform pre- and post-aerosol sealing duct leakage tests to measure the improvement and confirm treatment effectiveness.

Common Areas of Duct Leakage

The most common place for ducts to leak air is through the joints. Ductwork is made of multiple metal pieces pressed together using tight fittings and metal bands, but these connections are rarely airtight.

As your HVAC system cycles through heating and cooling each year, the ducts naturally expand and contract. Over time, this movement causes joints to lose their seal, creating gaps and leaks — making a duct leakage test valuable for any home in South Plainfield borough, NJ, whether new or old.

Many energy auditors check for leaks by feeling along the ductwork and using a small tool to gauge the size of gaps between joints. If your duct system was never sealed using mastic and approved tape, there is a high probability that air leakage is present.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system needs to measure under 4 CFM per 100 square feet when the air handler is included, or 3 CFM per 100 square feet when it is not. For new construction, a passing duct leakage test is a required step before final occupancy certification can be awarded.

If your home in South Plainfield borough, NJ doesn’t pass its duct leakage evaluation, you’re likely paying more for temperature control — and contributing to long-term HVAC strain. Meeting the 3–4 CFM requirement is essential not only for code compliance but also for protecting your home’s energy efficiency and comfort.

Your technician will also share expert recommendations for fixing leakage problems, helping you achieve a passing score, save on utilities, and improve home performance.

Local Energy Audits — affordable duct leakage test in South Plainfield borough, NJ

Local Energy Audits is proud to work with customers in South Plainfield borough, NJ and all nearby areas. We specialize in revealing duct leakage and energy inefficiencies through blower door and duct leakage test. Whether your project is new or existing, we’re here to assist.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by closing off every duct and register with duct mask tape across both the supply and return sides.

After the registers are sealed, we link the duct tester to the unit or to one main return.

The ducts are then depressurized to 25 Pascals. At that point, the nanometer allows us to get an accurate duct leakage measurement.

Schedule Your Duct Leakage Test in South Plainfield borough, NJ

Ensure your HVAC system is efficient, compliant, and performing at its best with professional duct leakage test in South Plainfield borough, NJ. Whether you’re a homeowner improving home comfort or a contractor finishing required inspections, our certified team delivers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and deliver on-site help to ensure you pass your test, lower energy waste, and maintain your HVAC system’s long-term reliability.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across South Plainfield borough, NJ with dependable and energy-efficient testing solutions.