Duct Leakage Test in Stafford, NJ

Ensure your HVAC system operates efficiently and meets local energy codes with professional duct leakage test in Stafford, NJ. Our certified technicians test and measure ductwork air leaks, helping homeowners and builders improve overall comfort, reduce wasted energy, and comply with state mandates.

Why Duct Leakage Test is Important In Stafford, NJ

Many states and municipalities oversee single-family buildings under the 2015 IECC, International Energy Conservation Code and multi-family buildings under the 2018 International Energy Conservation Code. The change will result in significant implications for home builders and HVAC contractors doing business in the state. A Duct Leakage Test along with a Blower Door Test is now required for any newly constructed or remodeled home as outlined in the 2015 regulations. Did you know that leaking ducts are a widespread cause of air loss in homes across Pennsylvania, New Jersey, and Delaware? Leaked air can increase your energy costs, overwork your HVAC system, and distribute insulation particles and dust around your home. This makes duct leakage test crucial for new and old homes alike. Keep reading to learn why duct leakage test is important and how you can benefit from them.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To get started with a duct leakage test in Stafford, NJ, the technician will block every supply and return register except the main return or air handler. A specially calibrated fan called a duct blaster is then connected to the opening. This fan depressurizes the duct system, making it easier to pinpoint exactly where air is leaking.

The duct blaster, combined with a precision pressure sensor, measures airflow and detects leaks in the duct system without causing any disturbance in your home. A duct leakage test — sometimes labeled as a duct blaster test — finds where your ducts are leaking air so you can decide on the best sealing strategy.

duct leakage test is simple, clean, and minimally invasive for residents. Most tests in Stafford, NJ are completed in roughly 30 to 60 minutes, and the resulting enhancements can support your home’s comfort and efficiency long-term.

How to Measure Duct Leakage

Duct leakage is evaluated in cubic feet per minute (CFM) per 100 square feet of conditioned space inside the home. Your technician uses a nanometer to sense slight pressure changes, showing precisely how much air is escaping through the ductwork. Understanding this number helps you locate trouble spots, review possible upgrades, and see if your home complies with local energy code requirements in Stafford, NJ.

Cost of Excessive Duct Leakage

If your home suffers from costly utility bills, uneven comfort levels, or persistent HVAC repairs, duct leakage may be contributing. According to ENERGY STAR, typical duct systems lose 20% to 30% of conditioned air through leaks. Outside air that’s too hot or too cold entering your system strains your HVAC, resulting in higher energy consumption and less comfort.

Overworked equipment also creates more wear, leading to breakdowns and costly fixes. Proper duct sealing helps support the long-term durability of your HVAC system, lengthening its lifespan and minimizing ongoing maintenance demands.

Duct leaks can also let in dust, mold spores, added moisture, and other harmful contaminants. This can worsen allergy reactions, negatively affect indoor air quality, and contribute to costly hidden structural damage over the years.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires that all new homes feature fully sealed duct systems utilizing updated, energy-efficient materials like mastic, foil tape, and insulation. But what about leaks that are hidden far behind walls or ceilings?

Aerosol sealing technology (AeroSeal) allows technicians to seal leaks located inside inaccessible parts of ductwork. To initiate this method, technicians seal every vent except one access point. The HVAC system is isolated, and a machine is connected to the ductwork. It pressurizes the ducts and circulates a fine aerosolized sealant that locates and fills tiny leaks beyond the reach of typical sealing.

This method works very well for small to medium leaks. However, larger openings may still need to be sealed manually with mastic and tape. Technicians complete before-and-after duct leakage tests to measure leakage reduction and ensure the aerosol sealing was effective.

Common Areas of Duct Leakage

The most common area where ducts leak air is around the joints. Ductwork uses several metal parts pressed together with tight fittings and metal bands, though these points are rarely airtight.

As your HVAC system heats and cools throughout the year, the ducts expand and contract. Over time, this movement leads the joints to loosen, resulting in gaps and leaks — making a duct leakage test important for new and older homes in Stafford, NJ.

Many energy auditors inspect duct leakage by feeling the ducts and using a small tool to determine how wide the gaps are between joints. If your duct system hasn’t been finished with mastic and approved tape, leaks are highly likely.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system needs to measure under 4 CFM per 100 square feet when the air handler is included, or 3 CFM per 100 square feet when it is not. For new construction, a passing duct leakage test is essential before the home can qualify for an occupancy certificate.

If your home in Stafford, NJ doesn’t pass its duct leakage evaluation, you’re likely paying more for temperature control — and contributing to long-term HVAC strain. Meeting the 3–4 CFM requirement is fundamental not only for code adherence but for boosting your home’s long-term efficiency and comfort.

Your technician will also advise you on the best ways to address leakage issues so you can pass the test, reduce utility bills, and enhance your home’s efficiency.

Local Energy Audits — affordable duct leakage test in Stafford, NJ

Local Energy Audits proudly provides service to homeowners and builders throughout Stafford, NJ and the surrounding region. We specialize in testing for duct leakage and energy inefficiencies using blower door and duct leakage methods. Whether you’re building from scratch or upgrading your home, we’re here to assist.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by sealing all the ducts and registers with duct mask tape on both the supply and return side.

After the registers are sealed, we position the duct tester on the HVAC unit or on a primary return.

The ducts are then reduced to a depressurized state of 25 Pascals. With them depressurized, the nanometer gives us the duct leakage reading.

Schedule Your Duct Leakage Test in Stafford, NJ

Ensure your HVAC system stays efficient, compliant, and operating at peak performance with expert duct leakage test in Stafford, NJ. Whether you’re a homeowner addressing comfort issues or a contractor completing the last inspection step, our certified team ensures fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and deliver practical on-site guidance to help you pass your test, decrease energy waste, and preserve your HVAC system’s long-term condition.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across Stafford, NJ with dependable and energy-efficient testing solutions.