Duct Leakage Test in West Milford, NJ

Guarantee your HVAC system runs efficiently and adheres to local requirements with quality duct leakage test in West Milford, NJ. Our certified technicians assess and measure air leaks in ducts to help homeowners and builders increase comfort, reduce energy inefficiencies, and ensure state compliance.

Why Duct Leakage Test is Important In West Milford, NJ

Various states and municipalities have adopted the 2015 IECC, International Energy Conservation Code for single-family houses, along with the 2018 International Energy Conservation Code for multi-family units. The change will bring notable implications for home builders and HVAC contractors working throughout the state. A Duct Leakage Test as well as a Blower Door Test in newly constructed or remodeled homes is now required in accordance with the 2015 regulations. Did you know that ducts are frequently the biggest contributors to home air loss in Pennsylvania, New Jersey, and Delaware? Leaked air can increase monthly energy costs, stress your HVAC system, and scatter dust and insulation across your living areas. This makes duct leakage test crucial for new and old homes alike. Keep reading to learn why duct leakage test is important and how you can benefit from them.

888 213-3975

What Our Clients Say

How a Duct Leakage Test Is Conducted

To start the duct testing process in West Milford, NJ, the technician seals all supply and return registers except for the main return or the air handler. A duct blaster, designed as a calibrated testing fan, is then attached to the duct system. Its purpose is to depressurize the ducts and uncover leak points.

The duct blaster pairs with a precision pressure sensor to measure airflow and identify leak locations in the ducts without disrupting your home. A duct leakage test — commonly called a duct blaster test — detects areas where your ducts lose air, helping you select the most efficient sealing solutions.

duct leakage test is easy, clean, and unobtrusive for residents in the home. Most tests in West Milford, NJ take only 30 to 60 minutes, yet the comfort and efficiency gains can last for years.

How to Measure Duct Leakage

Duct leakage is tracked in cubic feet per minute (CFM) per 100 square feet of conditioned living area. Your technician uses a nanometer to measure tiny pressure changes, revealing how much air is escaping through the ducts. Understanding this number lets you identify inefficiencies, weigh improvement options, and confirm your home’s compliance with local energy code requirements in West Milford, NJ.

Cost of Excessive Duct Leakage

If you’re struggling with expensive utility bills, inconsistent indoor temperatures, or continual HVAC problems, duct leakage might be the culprit. According to ENERGY STAR, most households lose 20% to 30% of their heated or cooled air because of duct leaks. Outside hot or cold air leaking into your system puts extra strain on your HVAC unit, raising energy bills and decreasing comfort.

Overworked equipment also increases the likelihood of breakdowns and drives up repair costs. Proper duct sealing helps promote the long-term integrity of your HVAC system, extending its lifespan and limiting continued maintenance needs.

Duct leaks can also introduce dust, mold spores, excess humidity, and other contaminants into the duct system. This can heighten allergy issues, compromise indoor air quality, and slowly cause expensive structural damage behind walls or ceilings.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC specifies that newly constructed homes must use fully sealed duct systems with modern, efficient materials such as mastic, foil tape, and insulation. But what do you do about leaks that sit deep within walls or ceilings?

Aerosol sealing technology (AeroSeal) is used to address openings concealed inside duct systems. To use this method, technicians seal all vents except one access point. The HVAC system is isolated, and a machine is hooked up to the duct system. It pressurizes the ducts and distributes a fine aerosolized sealant that seals small openings traditional methods cannot reach.

This method is very effective for minor to moderate leaks. However, substantial openings may still need traditional sealing with mastic and tape. Technicians carry out leakage testing prior to and after aerosol sealing to observe the reduction and ensure treatment success.

Common Areas of Duct Leakage

The most usual spot for duct air leakage is the joints. Ductwork is composed of various metal pieces pressed together using tight fittings and metal bands, but these seals are hardly ever fully airtight.

As your HVAC system operates in both heating and cooling modes year-round, the ducts continuously expand and contract. Over time, this movement allows the joints to loosen, producing gaps and leaks — which is why a duct leakage test is suggested for homes of all ages in West Milford, NJ.

Many energy auditors check duct leakage by feeling around the ducts and using a small tool to test the width of gaps between joints. If your duct system was not sealed with mastic and approved tape, there’s a high likelihood that air is leaking.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system has to measure below 4 CFM per 100 square feet with the air handler installed, or 3 CFM per 100 square feet without the air handler. For new construction, the home must pass a duct leakage test before qualifying for an occupancy certificate.

If your home in West Milford, NJ does not meet duct leakage standards, you are likely overpaying for heating and cooling — and adding unnecessary strain to your HVAC equipment. Meeting the 3–4 CFM requirement is crucial not only for passing code but also for maintaining your home’s overall energy efficiency and comfort.

Your technician will also advise you on the best ways to address leakage issues so you can pass the test, reduce utility bills, and enhance your home’s efficiency.

Local Energy Audits — affordable duct leakage test in West Milford, NJ

Local Energy Audits is honored to serve customers in West Milford, NJ and all surrounding areas. We specialize in assessing duct leakage and energy inefficiencies with blower door tests and duct leakage tests. Whether it’s a new build or a current home, we’re here to support you.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.

The Duct Leakage Test Steps Explained

A duct leakage test begins by ensuring all ducts and registers are sealed with duct mask tape on both the supply and return sides.

After the registers are sealed, we attach our duct tester to the system’s unit or to the main return.

The ducts are then brought to a depressurized pressure of 25 Pascals. Once depressurized, we use the nanometer for a leakage reading.

Schedule Your Duct Leakage Test in West Milford, NJ

Ensure your HVAC system maximizes efficiency, meets required standards, and performs consistently with thorough duct leakage test in West Milford, NJ. Whether you’re a homeowner enhancing indoor comfort or a contractor finishing a final inspection, our certified team offers fast, accurate, and affordable testing.

We use industry-standard duct blaster equipment and supply on-site support to help you pass your test, curb energy waste, and maintain your HVAC system’s long-term performance.

📞 Call 888-213-3975 ✉️ Request a Quote

Serving homeowners, builders, and contractors across West Milford, NJ with dependable and energy-efficient testing solutions.