Duct Leakage Test in Winslow township, NJ

How a Duct Leakage Test Is Conducted

To initiate a duct leakage test in Winslow township, NJ, your technician seals all supply and return registers, leaving only the main return or air handler open. A calibrated duct blaster is then mounted to the opening. By depressurizing the duct system, it creates ideal conditions for detecting air leaks.

The duct blaster, working hand in hand with a precision pressure sensor, measures airflow and identifies leaks in the ductwork without impacting your home. A duct leakage test — also known as a duct blaster test — pinpoints where air is escaping from your ducts, helping you choose the best sealing methods.

duct leakage test is efficient, clean, and performed without bothering residents. Most tests in Winslow township, NJ take between 30 and 60 minutes, and the improvements they deliver can elevate comfort and efficiency for years ahead.

How to Measure Duct Leakage

Duct leakage is determined in cubic feet per minute (CFM) for every 100 square feet of conditioned interior space. Your technician uses a nanometer to pick up minor pressure shifts that indicate the level of air leakage within the ducts. Understanding this number helps you reveal problem areas, consider enhancement strategies, and validate that your home meets local energy code requirements in Winslow township, NJ.

Cost of Excessive Duct Leakage

If you’re struggling with expensive utility bills, inconsistent indoor temperatures, or continual HVAC problems, duct leakage might be the culprit. According to ENERGY STAR, leaking ducts cause the average home to lose 20%–30% of conditioned air. Air entering from outside—whether warm or cold—makes your HVAC operate harder, causing energy costs to climb and comfort to decrease.

Overworked equipment also accelerates wear and tear, resulting in more breakdowns and costly repairs. Proper duct sealing helps support the long-term durability of your HVAC system, lengthening its lifespan and minimizing ongoing maintenance demands.

Duct leaks can also bring dust, mold spores, excess moisture, and other impurities into the duct system. This can make allergies more severe, reduce the quality of indoor air, and produce costly structural harm behind walls or ceilings as time progresses.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC requires all newly constructed homes to have fully sealed ductwork with modern, energy-saving materials such as mastic, foil tape, and insulation. But what if leaks are concealed deep inside the structure of your walls or ceilings?

Aerosol sealing technology (AeroSeal) is one way to reach hidden openings inside ductwork. To perform the process, technicians seal all vents but leave one access point open. The HVAC system is isolated, and a machine is connected to the duct system. It pressurizes the ducts and distributes an ultra-fine aerosol sealant to fill small gaps and holes that manual sealing methods can’t access.

This method is great for handling small to medium leaks. However, larger holes often require manual sealing with mastic and tape. Technicians run leakage tests both before and after aerosol sealing to gauge how much air loss decreased and confirm proper results.

Common Areas of Duct Leakage

The most frequent point of air leakage in ductwork is the joints. Multiple metal parts are pressed together using tight fittings and metal bands, although these junctions are seldom airtight.

As your HVAC system heats and cools during seasonal changes, the ductwork expands and then contracts. Over time, this movement allows the joints to loosen, producing gaps and leaks — which is why a duct leakage test is suggested for homes of all ages in Winslow township, NJ.

Many energy auditors verify duct leakage by feeling around the ducts and using a small tool to assess the opening size at the joints. If your duct system is missing mastic and approved tape sealing, there’s a significant chance that air leakage is happening.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system needs to register under 4 CFM per 100 square feet with the air handler attached, or 3 CFM per 100 square feet without it attached. For new construction, a duct leakage test must be successfully passed before the home can obtain an occupancy certificate.

If your home in Winslow township, NJ fails duct leakage test, you are probably spending unnecessarily on heating and cooling — and placing ongoing stress on your HVAC equipment. Meeting the 3–4 CFM requirement is important not only for the inspector, but also for maximizing energy efficiency and comfort in your home.

Your technician will also give professional advice on resolving leakage issues to help you achieve a passing score, cut down utility bills, and boost your home’s performance.

Local Energy Audits — affordable duct leakage test in Winslow township, NJ

Local Energy Audits proudly works with clients throughout Winslow township, NJ and nearby locations. We specialize in evaluating duct leakage and energy inefficiencies with blower door and duct leakage tests. Whether you’re developing a new home or enhancing an older one, we’re here to help.
If you’d like to book a test, call us during business hours or contact us online to request an appointment.