Blower Door Test in East Rutherford, NJ

Confirm your home’s energy performance and identify leaks through accurate blower door test in East Rutherford, NJ. Our certified technicians assist homeowners, builders, and contractors in detecting hidden air leaks, boosting comfort, and ensuring full compliance with NJ energy codes.

What Is A Blower Door Test?

A blower door test is conducted to assess air changes per hour inside a home or structure, ensuring the right balance between air leakage and fresh airflow. Too many air changes can negatively impact efficiency, as every replacement of indoor air demands additional heating or cooling energy. Frequent air changes can cause drafts and discomfort from leaks, increasing the risk of indoor mold and condensation. A blower door test in East Rutherford, NJ helps spot air leaks before they worsen, improving efficiency, comfort, and long-term structural quality.

What Our Clients Say

How Is A Blower Door Test Conducted?

During blower door test in East Rutherford, NJ, exterior openings are closed securely, and interior doors are left open to maintain even air circulation across the house. One chosen exterior door is equipped with an adjustable aluminum frame and fabric panel for test installation. Once the frame is in place, a calibrated fan is used to bring the home’s pressure down to 50 Pascals — about the same as a 20 mph wind on the structure.

As the fan creates negative pressure, outside air infiltrates the home through gaps and small openings. A precise tool called a nanometer is used to compare the pressure generated by the fan with that inside the home. The data is converted into air changes per hour (ACH), identifying how tightly sealed and energy-efficient the house is in NJ.

What Is A Passing Blower Door Test Score?

Construction in East Rutherford, NJ must comply with the 2015 International Energy Conservation Code (IECC) or updated versions recognized by local authorities. Most areas recognize 3 air changes per hour or less as the target blower door test value to ensure energy efficiency. Reaching the target during your blower door test in East Rutherford, NJ guarantees lower energy consumption and full code compliance.

Why Do I Need A Blower Door Test?

In accordance with the IECC, the State of NJ and various local authorities require blower door test for new or remodeled residential properties. We regularly provide blower door test in East Rutherford, NJ for home builders, contractors, and homeowners working to meet local code requirements and close permits. A duct leakage test could be required when air ducts or HVAC units extend outside the structure’s thermal envelope. Learn more about energy code compliance.

Homeowners who choose blower door test in East Rutherford, NJ can easily locate leaks. As the fan depressurizes the home, airflow through gaps becomes apparent, exposing areas needing improvement. Although it’s a short process, a blower door test produces a long-lasting impact by improving comfort and lowering energy costs throughout NJ’ climate extremes.

How To Pass A Blower Door Test:

  • Anticipate potential air leaks before testing begins.
  • Use an air barrier system such as Tyvek or Zip Sheathing and verify that each seam is properly sealed with tape.
  • Install correctly rated insulation with the proper R-value and confirm it’s well positioned in every part of the building envelope.
  • Seal all penetrations in exterior walls using caulk or spray foam.
  • Ensure doors and windows are properly installed, caulked, and weather-sealed.
  • Close any gaps connecting conditioned and unconditioned spaces, such as those leading to basements, attics, or crawl spaces.
  • Local code offices often issue compliance checklists — access the Philadelphia example here for reference.
  • With the help of thermal imaging tools, caulk, and spray foam, Local Energy Audits efficiently detects and seals leaks on-site./li>
  • In more than 90% of cases, we secure a passing score within two hours and deliver the paperwork needed to close the permit.

Preparing for a Blower Door Test in East Rutherford, NJ

Preparation for blower door test in East Rutherford, NJ begins with switching off the HVAC system, as well as any bathroom and kitchen exhaust fans. Next, we conduct a quick walkthrough of the home, confirming that all exterior doors and windows are securely closed — including those to unfinished basements, garages, or any area outside the thermal envelope. After sealing the home, the blower door fan is installed in a central exterior doorway and used to lower pressure to 50 Pascals to measure airflow and leakage effectively. When the home reaches negative pressure, outside air infiltrates through openings, making leaks visible. By using a thermal imager, we can spot temperature variations in walls, ceilings, and other surfaces that indicate leaks into unconditioned areas. We come prepared with chalk, spray foam, and weatherstripping, allowing us to assist homeowners or contractors in sealing visible air leakage points on the spot. Once sealing work is done, we immediately retest to verify that the desired blower door score has been achieved for compliance with local standards in East Rutherford, NJ.

Blower Door Test for Contractors in East Rutherford, NJ

When contractors schedule blower door test in East Rutherford, NJ, professionally insulated homes often only need minor adjustments that can be handled during the test. Using simple yet effective materials like chalk and spray foam, we can seal most small leaks or gaps right during testing. In over 90% of cases, we achieve a passing blower door test score within two hours and issue the full documentation needed to complete the building permit process on the same day.

Schedule Your blower door test in East Rutherford, NJ

Count on our skilled technicians for fast, precise, and certified blower door test in East Rutherford, NJ. Whether you’re improving your home’s comfort or closing a building permit, our tests are performed with care and meet all energy efficiency codes.