Blower Door Test in Cedars, PA

Assess your home’s air sealing and energy standards with trusted blower door test in Cedars, PA. Our qualified technicians assist homeowners, builders, and contractors in detecting air leaks, optimizing comfort, and maintaining compliance with PA energy codes.

What Is A Blower Door Test?

A blower door test helps calculate air changes per hour in your property. This natural air exchange process refreshes the indoor environment with new air. Having too many air changes can waste energy because each new cycle demands the air be reheated or recooled, cutting overall efficiency. Excessive air changes can also lead to drafts and discomfort caused by air leaks, along with moisture, condensation, and mold problems inside the home. A blower door test in Cedars, PA helps homeowners and builders find and fix leaks promptly, boosting energy efficiency and indoor comfort for years to come.

What Our Clients Say

How Is A Blower Door Test Conducted?

In preparation for blower door test in Cedars, PA, all exterior entry points are sealed, and interior doors are left open to allow consistent air circulation. One primary exterior doorway is used, where a flexible aluminum frame and fabric panel are mounted tightly. A calibrated fan mounted on the frame reduces the home’s pressure to 50 Pascals, simulating the force of a continuous 20 mph wind.

When the fan pulls indoor air outward, fresh air from outside rushes in through leaks and weak spots. Using an advanced nanometer, we evaluate the pressure difference between the fan system and the home’s interior environment. The test results are converted into air changes per hour (ACH), which determines the airtightness and performance level of the home in PA weather.

What Is A Passing Blower Door Test Score?

Properties in Cedars, PA must meet the efficiency guidelines of the 2015 International Energy Conservation Code (IECC) or the latest version adopted locally. In most regions, homes must achieve 3 air changes per hour or less on a blower door test to meet energy efficiency standards. Meeting this level during your blower door test in Cedars, PA supports energy efficiency and verifies that your home meets local codes.

Why Do I Need A Blower Door Test?

In PA, both state and local jurisdictions follow the IECC (International Energy Conservation Code), requiring blower door test for new and remodeled homes. We routinely help home builders, contractors, and homeowners requiring blower door test in Cedars, PA for energy code compliance and permit closure. A duct leakage test could be required when air ducts or HVAC units extend outside the structure’s thermal envelope. Learn more about energy code compliance.

Homeowners see real value in blower door test in Cedars, PA. As the fan draws air out, leaks become clear, making it easy to target repairs and improve efficiency. A blower door test may take just a few hours, yet its long-lasting impact can greatly improve your home’s comfort and energy use across PA’ hot summers and cool winters.

How To Pass A Blower Door Test:

  • Anticipate potential air leaks before testing begins.
  • Install an effective air barrier, for example Tyvek or Zip Sheathing, and make certain all seams are sealed with durable tape.
  • Apply insulation of the correct R-value and make sure it fits snugly in all areas of the building envelope.
  • Seal all penetrations in exterior walls using caulk or spray foam.
  • Ensure doors and windows are properly installed, caulked, and weather-sealed.
  • Seal every transition point between conditioned and unconditioned environments, including attics, crawl spaces, and basements.
  • Local code departments usually provide a checklist to assist with compliance — see the Philadelphia example here.
  • Local Energy Audits technicians carry thermal imaging devices, caulk, and spray foam to pinpoint and seal air leaks immediately./li>
  • We achieve a passing score within two hours in over 90% of cases and promptly issue the documents to finalize your permit.

Preparing for a Blower Door Test in Cedars, PA

Before starting blower door test in Cedars, PA, we turn off all heating, air conditioning, and exhaust fans in bathrooms and kitchens. We then perform a detailed walkthrough to verify that all exterior windows and doors are tightly shut, including any that lead to spaces beyond the thermal envelope. Once preparation is complete, the blower door fan and frame are installed in a centrally located exterior door. The fan then reduces pressure to 50 Pascals, allowing accurate leakage assessment. After the home is depressurized, outdoor air pushes in more strongly, allowing leaks to become more noticeable. A thermal imager helps us visualize temperature differences in walls, ceilings, and surfaces that separate conditioned and unconditioned spaces. Our technicians arrive with chalk, spray foam, and weatherstripping materials, ready to work with homeowners or contractors to fix visible air leakage problems right away. After completing sealing improvements, we retest immediately to ensure the desired blower door score is met and the home complies with efficiency standards in Cedars, PA.

Blower Door Test for Contractors in Cedars, PA

Professionally insulated homes tested by contractors during blower door test in Cedars, PA can often address minor issues right on the spot. With chalk and spray foam on hand, our crew can seal small leaks or gaps almost instantly. In over 90% of cases, we reach a passing blower door test score in two hours and issue the required documentation for quick permit closure.

Schedule Your blower door test in Cedars, PA

Get accurate, efficient, and certified blower door test in Cedars, PA performed by our knowledgeable experts. Whether you’re a homeowner aiming to enhance comfort or a contractor needing to close out a permit, we make sure each test complies with energy codes accurately and efficiently.