Blower Door Test in Warrington, PA

Improve insulation performance and meet energy code requirements through thorough blower door test in Warrington, PA. Our certified specialists support homeowners, builders, and contractors by locating hidden air leaks, improving efficiency, and achieving PA energy code compliance.

What Is A Blower Door Test?

A blower door test quantifies how often indoor air is renewed through air changes per hour, helping maintain optimal ventilation. Too frequent air replacement can reduce efficiency since every exchange requires your system to use more energy for heating or cooling. Too frequent air changes can produce drafts and discomfort from leaks, while also increasing the risk of condensation, moisture, and mold. A blower door test in Warrington, PA assists in finding and sealing air leaks early to improve home comfort, energy efficiency, and overall durability.

888 213-3975

What Our Clients Say

How Is A Blower Door Test Conducted?

In blower door test in Warrington, PA, every exterior door and window is shut, while interior doors stay open to allow uniform airflow inside the building. A main exterior door is selected for setup, with an adjustable aluminum frame and fitted fabric panel placed in position. The mounted calibrated fan depressurizes the building to 50 Pascals, a condition similar to the effect of a 20 mph wind.

When indoor air is extracted, outdoor air pushes in through every leak and small gap in the building. Using an advanced nanometer, we evaluate the pressure difference between the fan system and the home’s interior environment. These values are expressed as air changes per hour (ACH), a key measure of the home’s airtightness and its energy performance under PA conditions.

What Is A Passing Blower Door Test Score?

In Warrington, PA, residential properties must meet the energy efficiency criteria outlined in the 2015 International Energy Conservation Code (IECC) or updated local versions. Typically, blower door test compliance means maintaining 3 air changes per hour or less for energy-efficient performance. Achieving this standard in your blower door test in Warrington, PA lowers utility bills and guarantees adherence to local code requirements.

Why Do I Need A Blower Door Test?

The State of PA and local municipalities have implemented the IECC code, which mandates blower door test on new and remodeled residential homes. We regularly provide blower door test in Warrington, PA for home builders, contractors, and homeowners working to meet local code requirements and close permits. You may be required to perform a duct leakage test if HVAC components are situated outside the home’s thermal envelope. Learn more about energy code compliance.

A blower door test in Warrington, PA helps homeowners discover inefficiencies. Depressurizing the home makes leaks more noticeable and highlights where energy can be conserved. A short blower door test can result in a long-lasting impact on your home’s energy efficiency, comfort, and year-round performance in PA.

How To Pass A Blower Door Test:

Anticipate potential air leaks before testing begins.
Install an effective air barrier, for example Tyvek or Zip Sheathing, and make certain all seams are sealed with durable tape.
Use insulation that has the designated R-value and confirm it’s properly applied throughout the building envelope for maximum efficiency.
Seal all penetrations in exterior walls using caulk or spray foam.
Ensure doors and windows are properly installed, caulked, and weather-sealed.
Seal gaps and openings separating conditioned spaces from unconditioned areas, including crawl spaces, basements, and attics.
Many building departments provide step-by-step compliance guides — you can find the Philadelphia example here.
Our professionals at Local Energy Audits use caulk, spray foam, and thermal imaging to detect and seal leaks on-site for better efficiency./li>
In over 90% of tests, we obtain a passing score within two hours and issue all paperwork required for permit closure.

Preparing for a Blower Door Test in Warrington, PA

To ensure accuracy during blower door test in Warrington, PA, we begin by switching off the HVAC system and all exhaust fans in the home. Next, we check the home thoroughly to ensure all exterior openings — even those leading to garages or unfinished basements — are securely closed and within the thermal envelope. After sealing everything, we install the blower door frame and fan in a central exterior door and use it to depressurize the home to 50 Pascals for accurate airflow data. Once the structure is depressurized, outside air penetrates more actively, exposing any leaks and weak points. Using a thermal imager, we detect problem areas by observing temperature variations in walls, ceilings, and other surfaces that connect to unconditioned spaces. We come prepared with chalk, spray foam, and weatherstripping, allowing us to assist homeowners or contractors in sealing visible air leakage points on the spot. We conduct a quick retest after sealing to verify that the desired blower door score has been achieved and that your home adheres to Warrington, PA energy efficiency codes.

Blower Door Test for Contractors in Warrington, PA

Professionally insulated homes tested by contractors during blower door test in Warrington, PA can often address minor issues right on the spot. Using simple yet effective materials like chalk and spray foam, we can seal most small leaks or gaps right during testing. In over 90% of cases, we achieve a passing blower door test score within two hours and issue the full documentation needed to complete the building permit process on the same day.

888 213-3975

Schedule Your blower door test in Warrington, PA

Get fast, reliable, and certified blower door test in Warrington, PA from our experienced and trusted team. Whether you’re improving comfort as a homeowner or completing a project as a contractor, we guarantee every test is performed with accuracy and full energy code compliance.

📞 Call 888-213-3975 ✉️ Contact Us