Blower Door Test in Brick, NJ

Ensure your home is sealed properly and energy-efficient with quality blower door test in Brick, NJ. Our certified technicians support homeowners, builders, and contractors in finding hidden leaks, improving comfort, and ensuring compliance with NJ energy codes.

What Is A Blower Door Test?

A blower door test evaluates air changes per hour, showing how often indoor air is replaced by fresh outdoor air — a process essential for healthy living spaces. If air changes happen too often, it forces your system to reheat or recool the air repeatedly, wasting energy and lowering performance. When air changes occur too often, they can result in drafts, air leakage discomfort, and moisture-related problems such as condensation and mold. A blower door test in Brick, NJ locates leaks and inefficiencies quickly, allowing homeowners to enhance energy performance and create a cozier living space.

888 213-3975

What Our Clients Say

How Is A Blower Door Test Conducted?

When performing blower door test in Brick, NJ, the technician ensures all exterior doors and windows are sealed and interior doors are open for steady air movement. One central exterior entry is selected, and an aluminum frame with a flexible fabric panel is installed securely. After setup, a calibrated fan is attached to the frame to lower the air pressure inside the house to 50 Pascals, equivalent to a 20 mph wind.

When the fan pulls indoor air outward, fresh air from outside rushes in through leaks and weak spots. A precise tool called a nanometer is used to compare the pressure generated by the fan with that inside the home. These readings are then converted into the total number of air changes per hour (ACH), revealing how airtight the home is and how well it performs in the NJ climate.

What Is A Passing Blower Door Test Score?

In Brick, NJ, residential properties must meet the energy efficiency criteria outlined in the 2015 International Energy Conservation Code (IECC) or updated local versions. For most regions, achieving 3 air changes per hour or less on a blower door test ensures that the home is properly energy efficient. Complying with this benchmark during a blower door test in Brick, NJ helps cut energy expenses and meet local building regulations.

Why Do I Need A Blower Door Test?

In accordance with the IECC, the State of NJ and various local authorities require blower door test for new or remodeled residential properties. Our team regularly helps home builders, contractors, and homeowners seeking blower door test in Brick, NJ to satisfy energy code standards and close final inspections. In some cases, a duct leakage test is needed if ducts or HVAC systems lie outside the home’s thermal envelope. Learn more about energy code compliance.

With blower door test in Brick, NJ, homeowners can detect where energy is being wasted. As the fan depressurizes the house, leaks are revealed, highlighting areas for sealing and savings. blower door test in Brick, NJ provides homeowners with clear insights into energy loss. When the fan creates pressure differences, leaks are exposed, allowing for easy detection and repair. Completing a blower door test takes just a few hours, yet its long-lasting impact enhances comfort and performance in every NJseason.

How To Pass A Blower Door Test:

Anticipate potential air leaks before testing begins.
Use a reliable air barrier like Tyvek or Zip Sheathing and make sure all seams are securely taped.
Place insulation with the accurate R-value and check for proper installation and full coverage in the building envelope.
Seal all penetrations in exterior walls using caulk or spray foam.
Ensure doors and windows are properly installed, caulked, and weather-sealed.
Make sure to seal all separations between conditioned and unconditioned areas, including crawl spaces, basements, and attics.
Building departments in many areas share checklists for verifying compliance — download the Philadelphia version here as a sample.
Equipped with thermal imaging tools, caulk, and spray foam, Local Energy Audits can find and fix leaks directly at your property./li>
In over 90% of tests, we obtain a passing score within two hours and issue all paperwork required for permit closure.

Preparing for a Blower Door Test in Brick, NJ

For blower door test in Brick, NJ, preparation includes turning off all heating and air conditioning units, plus bathroom and kitchen exhaust fans. We proceed with a quick home walkthrough, checking that every exterior door and window is tightly shut — including ones that lead to unfinished or unconditioned spaces outside the thermal envelope. Once preparation is complete, the blower door fan and frame are installed in a centrally located exterior door. The fan then reduces pressure to 50 Pascals, allowing accurate leakage assessment. After depressurization, air infiltration from outdoors increases, allowing faster and more accurate leak detection. Using a thermal imager, we locate inefficiencies by observing temperature differences in walls, ceilings, and surfaces separating conditioned and unconditioned areas. Using chalk, spray foam, and weatherstripping, we assist homeowners and contractors in addressing visible air leakage areas on-site. After sealing the identified leaks, we retest right away to confirm that the desired blower door score meets local energy performance standards in Brick, NJ.

Blower Door Test for Contractors in Brick, NJ

During blower door test in Brick, NJ, contractors will find that well-insulated homes can manage minor issues directly on-site. Using materials like chalk and spray foam, small leaks or gaps can typically be sealed right away during the test. In over 90% of cases, we successfully achieve a passing blower door test score within just two hours and promptly deliver all required documentation to close out the building permit without any delay.

888 213-3975

Schedule Your blower door test in Brick, NJ

Get dependable, efficient, and certified blower door test in Brick, NJ performed by our qualified and experienced experts. Whether you’re a homeowner improving energy performance or a contractor completing certification, we make sure each test fulfills all energy code requirements.

📞 Call 888-213-3975 ✉️ Contact Us