Blower Door Test in Tinton Falls, NJ

Ensure your home is sealed properly and energy-efficient with quality blower door test in Tinton Falls, NJ. Our certified team partners with homeowners, builders, and contractors to uncover air leaks, enhance comfort, and ensure NJ energy code adherence.

What Is A Blower Door Test?

A blower door test checks the number of air changes per hour in your home, ensuring old air is replaced with new, clean air for a healthier environment. Too many air changes, however, can be detrimental because every time the air is replaced, it must be reheated or recooled, leading to higher energy use and lower efficiency. Excessive air circulation may cause drafts, discomfort from leaks, and indoor problems like condensation, mold, and moisture damage. A blower door test in Tinton Falls, NJ assists in finding and sealing air leaks early to improve home comfort, energy efficiency, and overall durability.

888 213-3975

What Our Clients Say

How Is A Blower Door Test Conducted?

To conduct blower door test in Tinton Falls, NJ, exterior doors and windows are closed properly, while interior doors remain open to help maintain even air movement. One central exterior entry is selected, and an aluminum frame with a flexible fabric panel is installed securely. The technician mounts a calibrated fan to the frame to depressurize the house to 50 Pascals, roughly matching a 20 mph wind effect.

As the fan exhausts indoor air, outside air starts seeping into the home through small leaks and gaps. With a nanometer, we record and compare the pressure produced by the fan to the pressure inside the house. These figures are calculated into air changes per hour (ACH), reflecting how well the home prevents air loss and maintains efficiency in NJ conditions.

What Is A Passing Blower Door Test Score?

In Tinton Falls, NJ, all new homes must comply with the 2015 International Energy Conservation Code (IECC) or more current codes enforced by local jurisdictions. Typically, blower door test compliance means maintaining 3 air changes per hour or less for energy-efficient performance. Reaching the target during your blower door test in Tinton Falls, NJ guarantees lower energy consumption and full code compliance.

Why Do I Need A Blower Door Test?

NJ, along with many city governments, enforces the IECC, which requires blower door test for residential projects after construction or renovation. We often work with home builders, contractors, and homeowners requiring blower door test in Tinton Falls, NJ to meet local energy codes and obtain permit approval. A duct leakage test might be required when HVAC units or ductwork are installed beyond the home’s thermal envelope. Learn more about energy code compliance.

Performing blower door test in Tinton Falls, NJ allows homeowners to identify and fix leaks. The test makes air infiltration visible, uncovering opportunities to reduce energy loss. This simple test, completed in a few hours, creates a long-lasting impact on your home’s efficiency and comfort during NJ’ hot and cold months.

How To Pass A Blower Door Test:

Anticipate potential air leaks before testing begins.
Use an air barrier system such as Tyvek or Zip Sheathing and verify that each seam is properly sealed with tape.
Install insulation with the appropriate R-value and ensure it is correctly fitted across the entire building envelope.
Seal all penetrations in exterior walls using caulk or spray foam.
Ensure doors and windows are properly installed, caulked, and weather-sealed.
Close any gaps connecting conditioned and unconditioned spaces, such as those leading to basements, attics, or crawl spaces.
Local building departments often supply a detailed checklist to ensure compliance — you can download the Philadelphia example here for guidance.
Local Energy Audits uses professional-grade thermal imaging, caulk, and spray foam to locate and close leaks during the visit./li>
In over 90% of tests, we obtain a passing score within two hours and issue all paperwork required for permit closure.

Preparing for a Blower Door Test in Tinton Falls, NJ

For blower door test in Tinton Falls, NJ, preparation includes turning off all heating and air conditioning units, plus bathroom and kitchen exhaust fans. Next, we check the home thoroughly to ensure all exterior openings — even those leading to garages or unfinished basements — are securely closed and within the thermal envelope. With all openings sealed, we place the blower door frame and fan in a main exterior door and use it to depressurize the structure to 50 Pascals for precise testing results. After depressurization, air from outside rushes in through cracks and gaps, making leak detection much easier. A thermal imager allows precise detection of problem areas by mapping temperature contrasts in walls, ceilings, and surfaces facing unconditioned areas. We’re equipped with chalk, spray foam, and weatherstripping materials, so we can partner with homeowners or contractors to repair visible air leakage problems right on-site. After the sealing process, we can promptly retest to confirm if the desired blower door score has been reached, meeting Tinton Falls, NJ energy code requirements.

Blower Door Test for Contractors in Tinton Falls, NJ

For contractors overseeing blower door test in Tinton Falls, NJ, most properly insulated homes can manage small on-site repairs during testing. With efficient sealing products such as chalk and spray foam, minor air leaks can often be fixed immediately. In over 90% of cases, our team achieves a passing blower door test score within just two hours and provides the documentation required to close the permit promptly.

888 213-3975

Schedule Your blower door test in Tinton Falls, NJ

Experience prompt, professional, and certified blower door test in Tinton Falls, NJ from our knowledgeable team. Whether you’re a homeowner seeking better efficiency or a contractor finalizing a build, we ensure every test aligns perfectly with energy code standards.

📞 Call 888-213-3975 ✉️ Contact Us