Blower Door Test in Readington, NJ

Protect your energy investment and verify airtightness with advanced blower door test in Readington, NJ. Our certified team helps homeowners, builders, and contractors locate air leaks, enhance indoor comfort, and meet all NJ energy efficiency requirements.

What Is A Blower Door Test?

A blower door test helps determine the air changes per hour to confirm that your home has sufficient fresh air replacement. Too many air exchanges make heating and cooling systems work harder, increasing energy consumption and lowering efficiency. Too many air changes can result in drafts and leaks that create discomfort and lead to moisture, mold, and condensation issues. A blower door test in Readington, NJ helps spot air leaks before they worsen, improving efficiency, comfort, and long-term structural quality.

888 213-3975

What Our Clients Say

How Is A Blower Door Test Conducted?

To carry out blower door test in Readington, NJ, exterior doors and windows are fully closed, and interior doors are left open for even air distribution in the home. One main exterior door is identified, and an adjustable aluminum frame with a fabric panel is securely attached. The mounted calibrated fan depressurizes the building to 50 Pascals, a condition similar to the effect of a 20 mph wind.

When indoor air is extracted, outdoor air pushes in through every leak and small gap in the building. A nanometer precisely gauges the pressure applied by the fan in relation to the home’s internal air pressure. These measurements are used to calculate air changes per hour (ACH), which reflects the home’s airtightness and performance under NJ weather.

What Is A Passing Blower Door Test Score?

Homes built in Readington, NJ are expected to comply with the 2015 International Energy Conservation Code (IECC) or any newer local versions in effect. Most areas recognize 3 air changes per hour or less as the target blower door test value to ensure energy efficiency. Achieving compliance in your blower door test in Readington, NJ helps improve energy efficiency and meet all local code mandates.

Why Do I Need A Blower Door Test?

NJ, along with many city governments, enforces the IECC, which requires blower door test for residential projects after construction or renovation. We often collaborate with home builders, contractors, and homeowners who require blower door test in Readington, NJ to meet energy efficiency standards and close permits. If ducts or HVAC units are located outside the thermal envelope, a duct leakage test may also be mandated. Learn more about energy code compliance.

Homeowners see real value in blower door test in Readington, NJ. As the fan draws air out, leaks become clear, making it easy to target repairs and improve efficiency. Taking only a few hours, a blower door test creates a long-lasting impact by improving comfort, performance, and efficiency in NJhomes.

How To Pass A Blower Door Test:

Anticipate potential air leaks before testing begins.
Use high-quality air barrier materials like Tyvek or Zip Sheathing and confirm all seams are perfectly taped.
Apply the correct R-value insulation and verify that it’s properly fitted to seal the whole building envelope.
Seal all penetrations in exterior walls using caulk or spray foam.
Ensure doors and windows are properly installed, caulked, and weather-sealed.
Seal gaps and openings separating conditioned spaces from unconditioned areas, including crawl spaces, basements, and attics.
Local code departments usually provide a checklist to assist with compliance — see the Philadelphia example here.
Local Energy Audits brings thermal cameras, caulk, and spray foam to locate and seal leaks while performing on-site testing./li>
More than 90% of the time, we deliver a passing score in under two hours and issue all documents needed for permit approval.

Preparing for a Blower Door Test in Readington, NJ

When preparing for blower door test in Readington, NJ, we first switch off the home’s heating, cooling, and exhaust systems. We then perform a brief inspection throughout the home to make sure all exterior doors and windows are tightly shut — even those opening to garages, basements, or spaces outside the thermal envelope. After sealing the home, the blower door fan is installed in a central exterior doorway and used to lower pressure to 50 Pascals to measure airflow and leakage effectively. After the pressure drops, outdoor air enters through gaps more noticeably, making leaks easier to identify. A thermal imager helps us visualize temperature differences in walls, ceilings, and surfaces that separate conditioned and unconditioned spaces. We’re equipped with chalk, spray foam, and weatherstripping materials, so we can partner with homeowners or contractors to repair visible air leakage problems right on-site. Once sealing is complete, we perform an immediate retest to verify that the desired blower door score is achieved and that your home meets all energy efficiency requirements in Readington, NJ.

Blower Door Test for Contractors in Readington, NJ

For contractors scheduling blower door test in Readington, NJ, most professionally insulated homes can quickly fix minor issues on-site during the testing process. With chalk and spray foam on hand, our crew can seal small leaks or gaps almost instantly. In over 90% of cases, we reach a passing blower door test score in two hours and issue the required documentation for quick permit closure.

888 213-3975

Schedule Your blower door test in Readington, NJ

Get trusted, professional, and certified blower door test in Readington, NJ from our experienced technicians. Whether you’re improving a home’s efficiency or ensuring code compliance for a project, we perform every test with professionalism and attention to detail.

📞 Call 888-213-3975 ✉️ Contact Us