Blower Door Test in Lincoln Park, NJ

Test your home’s air barriers and meet energy regulations through dependable blower door test in Lincoln Park, NJ. Our certified professionals work with homeowners, builders, and contractors to uncover hidden air leaks and guarantee compliance with NJ energy codes.

What Is A Blower Door Test?

A blower door test helps determine the air changes per hour to confirm that your home has sufficient fresh air replacement. When a home experiences excessive air changes, the HVAC system must reheat or recool more frequently, increasing energy use and reducing efficiency. When there are too many air leaks, drafts and discomfort can occur, along with moisture problems such as mold and condensation. A blower door test in Lincoln Park, NJ helps spot air leaks before they worsen, improving efficiency, comfort, and long-term structural quality.

888 213-3975

What Our Clients Say

How Is A Blower Door Test Conducted?

During blower door test in Lincoln Park, NJ, exterior openings are closed securely, and interior doors are left open to maintain even air circulation across the house. One primary exterior doorway is used, where a flexible aluminum frame and fabric panel are mounted tightly. A calibrated fan is fitted into the frame and depressurizes the home to 50 Pascals, mimicking the pressure caused by a 20 mph wind.

When the fan depressurizes the home, outdoor air seeps in through leaks, crevices, and other air pathways. A precise tool called a nanometer is used to compare the pressure generated by the fan with that inside the home. These measurements yield air changes per hour (ACH), showing how airtight and energy-efficient the property is in NJ.

What Is A Passing Blower Door Test Score?

Homes in Lincoln Park, NJ are typically required to follow the 2015 International Energy Conservation Code (IECC) or the most recent version adopted locally. In most areas, an acceptable blower door test result is 3 air changes per hour or less, confirming that the home achieves optimal energy efficiency. When your blower door test in Lincoln Park, NJ meets this requirement, you ensure energy efficiency and maintain compliance with building codes.

Why Do I Need A Blower Door Test?

NJ state regulations and many municipalities abide by the IECC, enforcing blower door tests for newly constructed or renovated homes. Our experts assist home builders, contractors, and homeowners needing blower door test in Lincoln Park, NJ to ensure compliance with energy codes and complete final permits. If ducts or HVAC units are located outside the thermal envelope, a duct leakage test may also be mandated. Learn more about energy code compliance.

There are many benefits of blower door test in Lincoln Park, NJ for homeowners. When the fan lowers indoor pressure, leaks become visible, allowing for easy identification of inefficiencies and energy-saving opportunities. Though a blower door test lasts just a few hours, it offers a long-lasting impact on your home’s comfort, durability, and performance year-round in NJ.

How To Pass A Blower Door Test:

Anticipate potential air leaks before testing begins.
Apply an effective air barrier such as Tyvek or Zip Sheathing, ensuring every seam is tightly sealed with proper tape.
Use insulation with the right R-value and confirm it is properly installed throughout the building envelope.
Seal all penetrations in exterior walls using caulk or spray foam.
Ensure doors and windows are properly installed, caulked, and weather-sealed.
Properly seal all connections between conditioned and unconditioned zones, including basements, crawl spaces, and attics.
Many local building offices offer a step-by-step checklist to confirm compliance — view the Philadelphia sample here.
At Local Energy Audits, we utilize thermal imaging equipment, caulk, and spray foam to identify and fix air leaks during testing./li>
More than 90% of our tests result in a passing score within two hours, along with immediate permit documentation.

Preparing for a Blower Door Test in Lincoln Park, NJ

To get ready for blower door test in Lincoln Park, NJ, our team turns off the HVAC system and shuts down kitchen and bathroom fans. We follow with a quick walkthrough to ensure all exterior doors and windows are fully closed — including those that connect to garages, basements, or any part outside the thermal envelope. Once the home is prepared, we mount the blower door fan and frame in a central exterior doorway and depressurize the building to 50 Pascals to measure air leakage precisely. Once the home is under depressurization, exterior air infiltrates faster through cracks, helping pinpoint leaks. Using a thermal imager, we locate inefficient areas by tracking temperature changes in walls, ceilings, and surfaces bordering unconditioned spaces. Carrying chalk, spray foam, and weatherstripping materials, we work directly with homeowners or contractors to resolve visible air leakage issues during the visit. After the sealing process, we can promptly retest to confirm if the desired blower door score has been reached, meeting Lincoln Park, NJ energy code requirements.

Blower Door Test for Contractors in Lincoln Park, NJ

For contractors scheduling blower door test in Lincoln Park, NJ, most professionally insulated homes can quickly fix minor issues on-site during the testing process. Using easy-to-apply materials like chalk and spray foam, we can correct small leaks or gaps during the test itself. In over 90% of cases, we successfully reach a passing blower door test score within two hours and hand over all necessary paperwork for immediate permit closure.

888 213-3975

Schedule Your blower door test in Lincoln Park, NJ

Rely on our expert team for accurate, efficient, and certified blower door test in Lincoln Park, NJ. Whether you’re a homeowner improving energy performance or a contractor completing certification, we make sure each test fulfills all energy code requirements.

📞 Call 888-213-3975 ✉️ Contact Us