Blower Door Test in Hillsdale, NJ

Verify your home’s airtightness and meet energy-efficiency standards with a professional blower door test in Hillsdale, NJ. Our qualified technicians assist homeowners, builders, and contractors in detecting air leaks, optimizing comfort, and maintaining compliance with NJ energy codes.

What Is A Blower Door Test?

A blower door test is designed to measure air changes per hour inside homes, promoting a balance between airtightness and necessary ventilation. An excessive rate of air changes can be inefficient because each time the air is replaced, it must be reheated or recooled, raising energy costs. Excessive air leakage can cause drafts, reduce comfort, and contribute to issues like condensation, moisture, and mold inside the home. A blower door test in Hillsdale, NJ helps homeowners and builders find and fix leaks promptly, boosting energy efficiency and indoor comfort for years to come.

888 213-3975

What Our Clients Say

How Is A Blower Door Test Conducted?

To perform blower door test in Hillsdale, NJ, all exterior doors and windows are tightly sealed, while interior doors remain open to promote balanced airflow throughout the home. A single main exterior door is fitted with an adjustable aluminum frame and attached fabric panel to begin the setup. The technician mounts a calibrated fan to the frame to depressurize the house to 50 Pascals, roughly matching a 20 mph wind effect.

As the fan extracts air, exterior air begins entering the house through any unsealed spaces or cracks. A nanometer is used to detect and compare the pressure created by the fan with the air pressure inside the structure. The data collected is translated into air changes per hour (ACH), showing the home’s airtightness and overall energy efficiency in NJ conditions.

What Is A Passing Blower Door Test Score?

Homes built in Hillsdale, NJ are expected to comply with the 2015 International Energy Conservation Code (IECC) or any newer local versions in effect. In most cases, passing the blower door test means reaching 3 air changes per hour or less, proving efficient home sealing. Reaching this target in your blower door test in Hillsdale, NJ helps maintain lower energy bills and fulfills local code obligations.

Why Do I Need A Blower Door Test?

NJ and several of its municipalities comply with the IECC (International Energy Conservation Code), mandating blower door test for new or updated homes. We routinely help home builders, contractors, and homeowners requiring blower door test in Hillsdale, NJ for energy code compliance and permit closure. A duct leakage test might be necessary if your home’s HVAC units or ducts are located outside its thermal envelope. Learn more about energy code compliance.

There are many benefits of blower door test in Hillsdale, NJ for homeowners. When the fan lowers indoor pressure, leaks become visible, allowing for easy identification of inefficiencies and energy-saving opportunities. Though a blower door test lasts just a few hours, it offers a long-lasting impact on your home’s comfort, durability, and performance year-round in NJ.

How To Pass A Blower Door Test:

Anticipate potential air leaks before testing begins.
Use high-quality air barrier materials like Tyvek or Zip Sheathing and confirm all seams are perfectly taped.
Apply insulation of the correct R-value and make sure it fits snugly in all areas of the building envelope.
Seal all penetrations in exterior walls using caulk or spray foam.
Ensure doors and windows are properly installed, caulked, and weather-sealed.
Seal off any access points or gaps between conditioned and unconditioned spaces like attics, crawl spaces, and basements.
Local construction departments often include compliance guides — you can download the Philadelphia checklist here.
Local Energy Audits uses thermal imaging tools, caulk, and spray foam to detect and seal leaks directly on-site./li>
Over 90% of cases result in a passing score within two hours, along with complete permit documentation.

Preparing for a Blower Door Test in Hillsdale, NJ

To prepare for blower door test in Hillsdale, NJ, we start by turning off the heating and cooling system, along with all bathroom fans and kitchen exhaust fans. Next, we check the home thoroughly to ensure all exterior openings — even those leading to garages or unfinished basements — are securely closed and within the thermal envelope. Once everything is sealed, we choose a centrally located exterior door and set up the blower door frame and fan. The fan then depressurizes the home to 50 Pascals, allowing us to measure airflow and leakage precisely. When the house is depressurized, outside air begins entering faster, exposing hidden leaks more effectively. Using a thermal imager, we easily locate air leaks by noting temperature differences on walls, ceilings, and other surfaces adjacent to unconditioned spaces. We carry all necessary materials, including chalk, spray foam, and weatherstripping, to collaborate with homeowners or contractors on visible air leakage repairs during testing. After sealing the identified leaks, we retest right away to confirm that the desired blower door score meets local energy performance standards in Hillsdale, NJ.

Blower Door Test for Contractors in Hillsdale, NJ

For contractors booking blower door test in Hillsdale, NJ, homes with quality insulation usually require only quick, on-site fixes during testing. With readily available sealing materials like chalk and spray foam, we can repair minor leaks or gaps on the spot. In more than 90% of cases, our team secures a passing blower door test score within two hours and provides full documentation to complete the permit without any delay.

888 213-3975

Schedule Your blower door test in Hillsdale, NJ

Get professional-grade, efficient, and certified blower door test in Hillsdale, NJ handled by our experienced staff. Whether you’re a homeowner upgrading comfort or a contractor closing permits, we carry out each test with accuracy and in full compliance with energy regulations.

📞 Call 888-213-3975 ✉️ Contact Us