Blower Door Test in Somers Point city, NJ

Ensure your home is sealed properly and energy-efficient with quality blower door test in Somers Point city, NJ. Our professional technicians help homeowners, builders, and contractors identify air leaks, improve home comfort, and satisfy NJ energy code regulations.

What Is A Blower Door Test?

A blower door test calculates the rate of air changes per hour in a property, verifying that proper ventilation keeps air fresh and clean. When the air changes too often, energy efficiency drops since the system must continuously reheat or recool the air inside. When too much air is exchanged, it can cause drafts, reduce comfort, and create conditions for moisture buildup and mold. A blower door test in Somers Point city, NJ enables early identification of air leaks, helping improve comfort, durability, and energy savings.

What Our Clients Say

How Is A Blower Door Test Conducted?

In preparation for blower door test in Somers Point city, NJ, all exterior entry points are sealed, and interior doors are left open to allow consistent air circulation. An adjustable aluminum frame and fabric panel are placed within a central exterior doorway to conduct the test. Technicians mount a calibrated fan onto the frame to achieve 50 Pascals of depressurization — similar to a constant 20 mph wind acting on the home.

When air is drawn out by the fan, outdoor air seeps in through unsealed joints and hidden cracks. Using a sensitive instrument known as a nanometer, we measure the fan’s pressure against the home’s internal pressure. These readings are then converted into the total number of air changes per hour (ACH), revealing how airtight the home is and how well it performs in the NJ climate.

What Is A Passing Blower Door Test Score?

In Somers Point city, NJ, compliance with the 2015 International Energy Conservation Code (IECC) or subsequent locally adopted versions is typically mandatory for residential properties. An efficient home in most regions will achieve 3 air changes per hour or less during a blower door test. By meeting this standard in your blower door test in Somers Point city, NJ, you can enjoy lower utility bills and peace of mind with code compliance.

Why Do I Need A Blower Door Test?

The State of NJ, together with many cities and counties, enforces the IECC (International Energy Conservation Code), which calls for blower door test on new or renovated residential properties. We frequently assist home builders, contractors, and homeowners who need blower door test in Somers Point city, NJ to comply with energy codes and finalize building permits. If ducts or HVAC units are located outside the thermal envelope, a duct leakage test may also be mandated. Learn more about energy code compliance.

Using blower door test in Somers Point city, NJ, homeowners can detect unwanted airflow. The depressurization process reveals leaks, helping them seal gaps and increase comfort. Completing a blower door test takes just a few hours, yet its long-lasting impact enhances comfort and performance in every NJseason.

How To Pass A Blower Door Test:

  • Anticipate potential air leaks before testing begins.
  • Use materials like Tyvek or Zip Sheathing as your air barrier and ensure every seam is well taped for best results.
  • Install correctly rated insulation with the proper R-value and confirm it’s well positioned in every part of the building envelope.
  • Seal all penetrations in exterior walls using caulk or spray foam.
  • Ensure doors and windows are properly installed, caulked, and weather-sealed.
  • Close and seal every opening between heated or cooled spaces and unconditioned areas such as basements, attics, and crawl spaces.
  • Local building departments often supply a detailed checklist to ensure compliance — you can download the Philadelphia example here for guidance.
  • Local Energy Audits uses thermal imaging tools, caulk, and spray foam to detect and seal leaks directly on-site./li>
  • Over 90% of the time, we complete testing with a passing score in two hours or less and handle all permit paperwork on-site.

Preparing for a Blower Door Test in Somers Point city, NJ

Preparation for blower door test in Somers Point city, NJ begins with switching off the HVAC system, as well as any bathroom and kitchen exhaust fans. Next, our team walks through the home to verify that every exterior door and window is sealed shut — including access points to unfinished basements, garages, or areas beyond the thermal envelope. With the home sealed, we select a main exterior door, install the blower door setup, and use the fan to depressurize to 50 Pascals, enabling accurate airflow measurement. Once depressurization is achieved, the inflow of outside air intensifies, making air leaks easier to find and fix. Using a thermal imager, we locate inefficient areas by tracking temperature changes in walls, ceilings, and surfaces bordering unconditioned spaces. We bring the tools and materials—chalk, spray foam, and weatherstripping—to work with homeowners or contractors in fixing visible air leakage issues immediately. We conduct a quick retest after sealing to verify that the desired blower door score has been achieved and that your home adheres to Somers Point city, NJ energy efficiency codes.

Blower Door Test for Contractors in Somers Point city, NJ

For contractors overseeing blower door test in Somers Point city, NJ, most properly insulated homes can manage small on-site repairs during testing. Using quick-application materials like chalk and spray foam, small leaks or openings are sealed right during testing. In more than 90% of cases, we achieve a passing blower door test score within two hours and deliver all documents needed to finalize the permit without any delay.

Schedule Your blower door test in Somers Point city, NJ

Get professional-grade, efficient, and certified blower door test in Somers Point city, NJ handled by our experienced staff. Whether you’re improving your home’s comfort or closing a building permit, our tests are performed with care and meet all energy efficiency codes.