Blower Door Test in Creamery, PA

Confirm your home’s energy performance and identify leaks through accurate blower door test in Creamery, PA. Our trained team assists homeowners, builders, and contractors by detecting hidden air leaks, boosting comfort, and meeting PA energy regulations.

What Is A Blower Door Test?

A blower door test measures the building’s air changes per hour, helping ensure indoor air is consistently refreshed. Too frequent air replacement can reduce efficiency since every exchange requires your system to use more energy for heating or cooling. Excessive air leakage can cause drafts, reduce comfort, and contribute to issues like condensation, moisture, and mold inside the home. A blower door test in Creamery, PA helps discover hidden leaks early so homeowners can save energy, enhance comfort, and improve home resilience.

What Our Clients Say

How Is A Blower Door Test Conducted?

For blower door test in Creamery, PA, all outside doors and windows are closed properly, and inside doors are kept open to balance air pressure throughout the space. A single main exterior door is fitted with an adjustable aluminum frame and attached fabric panel to begin the setup. A calibrated fan is fitted into the frame and depressurizes the home to 50 Pascals, mimicking the pressure caused by a 20 mph wind.

As the fan extracts air, exterior air begins entering the house through any unsealed spaces or cracks. A sensitive nanometer helps us measure and compare the pressure created by the fan with the interior air pressure. The data collected is translated into air changes per hour (ACH), showing the home’s airtightness and overall energy efficiency in PA conditions.

What Is A Passing Blower Door Test Score?

In Creamery, PA, compliance with the 2015 International Energy Conservation Code (IECC) or subsequent locally adopted versions is typically mandatory for residential properties. Typically, a passing blower door test result is 3 air changes per hour or lower, which indicates good energy efficiency. Achieving this goal during your blower door test in Creamery, PA promotes energy savings and demonstrates adherence to local building rules.

Why Do I Need A Blower Door Test?

The State of PA, together with many cities and counties, enforces the IECC (International Energy Conservation Code), which calls for blower door test on new or renovated residential properties. Our team frequently assists home builders, contractors, and homeowners performing blower door test in Creamery, PA to verify compliance and secure permit approval. In some cases, a duct leakage test is needed if ducts or HVAC systems lie outside the home’s thermal envelope. Learn more about energy code compliance.

Using blower door test in Creamery, PA, homeowners can detect unwanted airflow. The depressurization process reveals leaks, helping them seal gaps and increase comfort. Typically completed within a few hours, a blower door test provides a long-lasting impact on comfort, energy efficiency, and overall home performance in PA’ varied climate.

How To Pass A Blower Door Test:

  • Anticipate potential air leaks before testing begins.
  • Use Tyvek or Zip Sheathing as your air barrier and carefully tape all seams to prevent air leakage.
  • Ensure insulation with the specified R-value is properly installed and fitted throughout the entire building envelope.
  • Seal all penetrations in exterior walls using caulk or spray foam.
  • Ensure doors and windows are properly installed, caulked, and weather-sealed.
  • Seal all openings between conditioned and unconditioned areas, including basements, attics, and crawl spaces.
  • Local building departments often supply a detailed checklist to ensure compliance — you can download the Philadelphia example here for guidance.
  • Local Energy Audits provides on-site leak detection and sealing using advanced thermal imaging tools, caulk, and spray foam./li>
  • In more than 90% of cases, we secure a passing score within two hours and deliver the paperwork needed to close the permit.

Preparing for a Blower Door Test in Creamery, PA

To get ready for blower door test in Creamery, PA, our team turns off the HVAC system and shuts down kitchen and bathroom fans. After that, we check the entire home to confirm all exterior doors and windows are tightly secured — even those leading to garages, unfinished basements, or other spaces outside the thermal envelope. With the home properly sealed, we mount the blower door frame and fan in a central exterior door, using it to depressurize to 50 Pascals for exact airflow readings. Once the structure is depressurized, outside air penetrates more actively, exposing any leaks and weak points. A thermal imager helps highlight problem zones by detecting temperature variations in walls, ceilings, and areas connected to unconditioned spaces. We’re equipped with chalk, spray foam, and weatherstripping materials, so we can partner with homeowners or contractors to repair visible air leakage problems right on-site. We can retest right after sealing to check whether the desired blower door score has been met, ensuring full compliance with Creamery, PA energy standards.

Blower Door Test for Contractors in Creamery, PA

Most professionally insulated homes undergoing blower door test in Creamery, PA can resolve small issues on-site during the contractor’s visit. Using simple yet effective materials like chalk and spray foam, we can seal most small leaks or gaps right during testing. In over 90% of cases, we achieve a passing blower door test score within two hours and issue the full documentation needed to complete the building permit process on the same day.

Schedule Your blower door test in Creamery, PA

Choose our professional team for quick, accurate, and certified blower door test in Creamery, PA. Whether you’re a homeowner or a contractor, we guarantee each blower door test is executed with accuracy and meets all local energy code requirements.