Blower Door Test in Exton, PA

Ensure your property meets energy codes and maintains efficiency through expert blower door test in Exton, PA. Our certified technicians assist homeowners, builders, and contractors in detecting hidden air leaks, boosting comfort, and ensuring full compliance with PA energy codes.

What Is A Blower Door Test?

A blower door test quantifies how often indoor air is renewed through air changes per hour, helping maintain optimal ventilation. Too many air changes can negatively impact efficiency, as every replacement of indoor air demands additional heating or cooling energy. Frequent air changes can cause drafts and discomfort from leaks, increasing the risk of indoor mold and condensation. A blower door test in Exton, PA helps discover hidden leaks early so homeowners can save energy, enhance comfort, and improve home resilience.

What Our Clients Say

How Is A Blower Door Test Conducted?

While performing blower door test in Exton, PA, technicians make sure exterior doors and windows are shut tight and interior doors are open for uniform pressure. One main exterior door is identified, and an adjustable aluminum frame with a fabric panel is securely attached. A calibrated fan is fitted into the frame and depressurizes the home to 50 Pascals, mimicking the pressure caused by a 20 mph wind.

As the fan expels air, the resulting pressure draws outdoor air in through hidden leaks and unsealed joints. Using a nanometer, we accurately compare the pressure difference between the fan output and the home’s interior. The gathered results are converted into air changes per hour (ACH) to determine how well-sealed and efficient the home is in the PA climate.

What Is A Passing Blower Door Test Score?

Homes throughout Exton, PA are required to satisfy the 2015 International Energy Conservation Code (IECC) or the most current version enforced by local regulators. In most jurisdictions, 3 air changes per hour or less is the benchmark for acceptable blower door test results and energy efficiency. When your blower door test in Exton, PA meets this requirement, you ensure energy efficiency and maintain compliance with building codes.

Why Do I Need A Blower Door Test?

PA state regulations and many municipalities abide by the IECC, enforcing blower door tests for newly constructed or renovated homes. Our team regularly helps home builders, contractors, and homeowners seeking blower door test in Exton, PA to satisfy energy code standards and close final inspections. If any part of the HVAC system or ductwork sits beyond the building’s thermal envelope, a duct leakage test may be required. Learn more about energy code compliance.

Homeowners gain major advantages from blower door test in Exton, PA. As the fan depressurizes the home, incoming air through leaks becomes easier to detect, revealing problem spots and potential energy-saving improvements. Typically completed within a few hours, a blower door test provides a long-lasting impact on comfort, energy efficiency, and overall home performance in PA’ varied climate.

How To Pass A Blower Door Test:

  • Anticipate potential air leaks before testing begins.
  • Choose Tyvek or Zip Sheathing as your air barrier and check that all seams are securely taped to maintain airtightness.
  • Use insulation with the right R-value and confirm it is properly installed throughout the building envelope.
  • Seal all penetrations in exterior walls using caulk or spray foam.
  • Ensure doors and windows are properly installed, caulked, and weather-sealed.
  • Properly seal all connections between conditioned and unconditioned zones, including basements, crawl spaces, and attics.
  • Local code offices often issue compliance checklists — access the Philadelphia example here for reference.
  • Equipped with thermal imaging tools, caulk, and spray foam, Local Energy Audits can find and fix leaks directly at your property./li>
  • Over 90% of the time, we complete testing with a passing score in two hours or less and handle all permit paperwork on-site.

Preparing for a Blower Door Test in Exton, PA

When preparing for blower door test in Exton, PA, we first switch off the home’s heating, cooling, and exhaust systems. Next, a brief home walkthrough ensures every exterior door and window is closed — even those opening to unconditioned areas like garages or basements outside the thermal envelope. With the home properly sealed, we mount the blower door frame and fan in a central exterior door, using it to depressurize to 50 Pascals for exact airflow readings. Once depressurization occurs, outdoor air enters the home more aggressively, revealing leaks more clearly. A thermal imager helps us identify air leakage points by revealing temperature shifts in walls, ceilings, and surfaces adjoining unconditioned areas. We bring the tools and materials—chalk, spray foam, and weatherstripping—to work with homeowners or contractors in fixing visible air leakage issues immediately. Once sealing is complete, we perform an immediate retest to verify that the desired blower door score is achieved and that your home meets all energy efficiency requirements in Exton, PA.

Blower Door Test for Contractors in Exton, PA

Most professionally insulated homes undergoing blower door test in Exton, PA can resolve small issues on-site during the contractor’s visit. With efficient sealing products such as chalk and spray foam, minor air leaks can often be fixed immediately. In over 90% of cases, our team achieves a passing blower door test score within just two hours and provides the documentation required to close the permit promptly.

Schedule Your blower door test in Exton, PA

Rely on our expert team for accurate, efficient, and certified blower door test in Exton, PA. Whether you’re a homeowner focused on efficiency or a contractor working to close a permit, we ensure each test is conducted with precision and meets all energy code standards.