Blower Door Test in Glendora, NJ

How Is A Blower Door Test Conducted?

For blower door test in Glendora, NJ, all outside doors and windows are closed properly, and inside doors are kept open to balance air pressure throughout the space. Technicians install a fabric panel and adjustable aluminum frame into one central exterior door opening. A calibrated fan is placed within the frame and operated to depressurize the structure to 50 Pascals — nearly the same as a 20 mph wind hitting the building.

As the fan creates negative pressure, outside air infiltrates the home through gaps and small openings. Using a sensitive instrument known as a nanometer, we measure the fan’s pressure against the home’s internal pressure. The collected data converts to air changes per hour (ACH), demonstrating how tightly sealed and efficient the home remains in NJ climates.

What Is A Passing Blower Door Test Score?

In Glendora, NJ, all new homes must comply with the 2015 International Energy Conservation Code (IECC) or more current codes enforced by local jurisdictions. Generally, a blower door test result of 3 air changes per hour or less is considered acceptable, ensuring proper energy performance. Reaching the target during your blower door test in Glendora, NJ guarantees lower energy consumption and full code compliance.

Why Do I Need A Blower Door Test?

Following the IECC guidelines, NJ and many local jurisdictions require blower door test on newly built or renovated residential dwellings. We provide support to home builders, contractors, and homeowners needing blower door test in Glendora, NJ for meeting energy efficiency standards and finalizing permits. You may also need a duct leakage test if your ductwork or HVAC equipment lies outside the home’s thermal envelope. Learn more about energy code compliance.

By performing blower door test in Glendora, NJ, homeowners can identify where conditioned air escapes. Depressurization makes leaks visible, uncovering ways to enhance comfort and efficiency. A blower door test usually takes just a few hours but delivers a long-lasting impact on your home’s comfort, performance, and efficiency—particularly during NJ’ hot summers and cool winters.

How To Pass A Blower Door Test:

• Anticipate potential air leaks before testing begins.
• Use materials like Tyvek or Zip Sheathing as your air barrier and ensure every seam is well taped for best results.
• Use insulation of the correct R-value and confirm that it’s tightly installed throughout every section of the building envelope.
• Seal all penetrations in exterior walls using caulk or spray foam.
• Ensure doors and windows are properly installed, caulked, and weather-sealed.
• Ensure all penetrations between conditioned and unconditioned areas—like attics, basements, and crawl spaces—are tightly sealed.
• Local permitting offices often offer official compliance checklists — review the Philadelphia sample here for reference.
• Local Energy Audits technicians carry thermal imaging devices, caulk, and spray foam to pinpoint and seal air leaks immediately./li>
• Over 90% of projects pass within two hours, and we immediately provide the required paperwork to close out the building permit.