Blower Door Test in Hammonton, NJ

Make sure your home meets airtightness and efficiency goals with certified blower door test in Hammonton, NJ. Our certified team partners with homeowners, builders, and contractors to uncover air leaks, enhance comfort, and ensure NJ energy code adherence.

What Is A Blower Door Test?

A blower door test evaluates air changes per hour, showing how often indoor air is replaced by fresh outdoor air — a process essential for healthy living spaces. Too many air changes can negatively impact efficiency, as every replacement of indoor air demands additional heating or cooling energy. Too frequent air changes can produce drafts and discomfort from leaks, while also increasing the risk of condensation, moisture, and mold. A blower door test in Hammonton, NJ locates leaks and inefficiencies quickly, allowing homeowners to enhance energy performance and create a cozier living space.

What Our Clients Say

How Is A Blower Door Test Conducted?

To perform blower door test in Hammonton, NJ, all exterior doors and windows are tightly sealed, while interior doors remain open to promote balanced airflow throughout the home. One chosen exterior door is equipped with an adjustable aluminum frame and fabric panel for test installation. A calibrated fan is installed onto the frame, creating a pressure difference of 50 Pascals, comparable to a continuous 20 mph wind blowing on the home.

When air is pulled from the home, outside air finds its way in through cracks and unsealed openings. Using an advanced nanometer, we evaluate the pressure difference between the fan system and the home’s interior environment. These values are expressed as air changes per hour (ACH), a key measure of the home’s airtightness and its energy performance under NJ conditions.

What Is A Passing Blower Door Test Score?

Properties in Hammonton, NJ must meet the efficiency guidelines of the 2015 International Energy Conservation Code (IECC) or the latest version adopted locally. In most areas, an acceptable blower door test result is 3 air changes per hour or less, confirming that the home achieves optimal energy efficiency. When your blower door test in Hammonton, NJmeets this requirement, you benefit from reduced energy bills and code compliance.

Why Do I Need A Blower Door Test?

The State of NJ and its local governments follow the IECC standards, which require blower door test on newly built or remodeled residential dwellings. We frequently assist home builders, contractors, and homeowners who need blower door test in Hammonton, NJ to comply with energy codes and finalize building permits. You may also need a duct leakage test if your ductwork or HVAC equipment lies outside the home’s thermal envelope. Learn more about energy code compliance.

Through blower door test in Hammonton, NJ, homeowners can easily find leaks. When the fan reduces internal pressure, air movement through problem areas becomes noticeable, offering chances to save energy. This simple test, completed in a few hours, creates a long-lasting impact on your home’s efficiency and comfort during NJ’ hot and cold months.

How To Pass A Blower Door Test:

  • Anticipate potential air leaks before testing begins.
  • Install an effective air barrier, for example Tyvek or Zip Sheathing, and make certain all seams are sealed with durable tape.
  • Use insulation that has the designated R-value and confirm it’s properly applied throughout the building envelope for maximum efficiency.
  • Seal all penetrations in exterior walls using caulk or spray foam.
  • Ensure doors and windows are properly installed, caulked, and weather-sealed.
  • Ensure complete sealing of all openings between conditioned rooms and unconditioned areas like basements, attics, and crawl spaces.
  • Local permitting offices often offer official compliance checklists — review the Philadelphia sample here for reference.
  • Our professionals at Local Energy Audits use caulk, spray foam, and thermal imaging to detect and seal leaks on-site for better efficiency./li>
  • More than 90% of the time, our team delivers a passing score in less than two hours and completes the necessary permit paperwork.

Preparing for a Blower Door Test in Hammonton, NJ

For blower door test in Hammonton, NJ, preparation includes turning off all heating and air conditioning units, plus bathroom and kitchen exhaust fans. We continue with a walkthrough inspection to confirm every exterior door and window is firmly closed — especially those to unconditioned spaces outside the thermal envelope. After sealing everything, we install the blower door frame and fan in a central exterior door and use it to depressurize the home to 50 Pascals for accurate airflow data. When the home reaches depressurization, outside air seeps in rapidly, helping identify leaks with greater accuracy. With a thermal imager, we identify issues by locating temperature differences across walls, ceilings, and surfaces leading to unconditioned areas. Our team provides on-site repair using chalk, spray foam, and weatherstripping, working with homeowners or contractors to fix visible air leakage problems. After sealing the identified leaks, we retest right away to confirm that the desired blower door score meets local energy performance standards in Hammonton, NJ.

Blower Door Test for Contractors in Hammonton, NJ

For contractors overseeing blower door test in Hammonton, NJ, most properly insulated homes can manage small on-site repairs during testing. Using materials like chalk and spray foam, small leaks or gaps can typically be sealed right away during the test. In over 90% of cases, we successfully achieve a passing blower door test score within just two hours and promptly deliver all required documentation to close out the building permit without any delay.

Schedule Your blower door test in Hammonton, NJ

Rely on our expert team for accurate, efficient, and certified blower door test in Hammonton, NJ. Whether you’re a homeowner seeking better efficiency or a contractor finalizing a build, we ensure every test aligns perfectly with energy code standards.