Blower Door Test in Lahaska, PA

Achieve peak energy efficiency and verify airtight construction with professional blower door test in Lahaska, PA. Our certified technicians provide homeowners, builders, and contractors with expert air leak detection, better comfort, and complete PA energy code compliance.

What Is A Blower Door Test?

A blower door test is conducted to assess air changes per hour inside a home or structure, ensuring the right balance between air leakage and fresh airflow. If air changes happen too often, it forces your system to reheat or recool the air repeatedly, wasting energy and lowering performance. Too many air changes can result in drafts and leaks that create discomfort and lead to moisture, mold, and condensation issues. A blower door test in Lahaska, PA locates leaks and inefficiencies quickly, allowing homeowners to enhance energy performance and create a cozier living space.

What Our Clients Say

How Is A Blower Door Test Conducted?

To carry out blower door test in Lahaska, PA, exterior doors and windows are fully closed, and interior doors are left open for even air distribution in the home. A single central exterior door is designated, where the blower door’s aluminum frame and fabric panel are set up. Next, a calibrated fan is mounted on the frame to reduce indoor pressure to 50 Pascals — similar to the force of a 20 mph wind on the building.

As the fan creates negative pressure, outside air infiltrates the home through gaps and small openings. Using an advanced nanometer, we evaluate the pressure difference between the fan system and the home’s interior environment. The gathered results are converted into air changes per hour (ACH) to determine how well-sealed and efficient the home is in the PA climate.

What Is A Passing Blower Door Test Score?

In Lahaska, PA, all new homes must comply with the 2015 International Energy Conservation Code (IECC) or more current codes enforced by local jurisdictions. Typically, a passing blower door test result is 3 air changes per hour or lower, which indicates good energy efficiency. Complying with this benchmark during a blower door test in Lahaska, PA helps cut energy expenses and meet local building regulations.

Why Do I Need A Blower Door Test?

Across PA, the IECC (International Energy Conservation Code) is adopted by the state and local jurisdictions, requiring blower door test on residential constructions and renovations. Our certified technicians assist home builders, contractors, and homeowners with blower door test in Lahaska, PA to meet energy requirements and wrap up permit approvals. A duct leakage test may also be necessary if any ducts or HVAC systems are positioned outside the building’s thermal envelope. Learn more about energy code compliance.

Homeowners see real value in blower door test in Lahaska, PA. As the fan draws air out, leaks become clear, making it easy to target repairs and improve efficiency. It only takes a few hours to perform a blower door test, but the long-lasting impact on comfort and efficiency is felt through PA’ hot summers and cool winters.

How To Pass A Blower Door Test:

  • Anticipate potential air leaks before testing begins.
  • Install an effective air barrier, for example Tyvek or Zip Sheathing, and make certain all seams are sealed with durable tape.
  • Install insulation that meets the required R-value and check that it’s evenly and securely placed throughout the building envelope.
  • Seal all penetrations in exterior walls using caulk or spray foam.
  • Ensure doors and windows are properly installed, caulked, and weather-sealed.
  • Close gaps and penetrations between conditioned zones and unconditioned sections like attics, basements, and crawl spaces.
  • Most building departments provide detailed compliance resources — view the Philadelphia checklist example here.
  • With caulk, spray foam, and advanced thermal imaging, Local Energy Audits locates and seals leaks efficiently on-site./li>
  • In over 90% of tests, we obtain a passing score within two hours and issue all paperwork required for permit closure.

Preparing for a Blower Door Test in Lahaska, PA

We begin blower door test in Lahaska, PA by switching off the HVAC system and shutting down all exhaust fans throughout the home. We then perform a detailed walkthrough to verify that all exterior windows and doors are tightly shut, including any that lead to spaces beyond the thermal envelope. After sealing the home, we install the blower door frame and fan in a central exterior doorway. The fan depressurizes the home to 50 Pascals to provide accurate airflow and leakage readings. After the home is depressurized, incoming outdoor air becomes more intense, making leak points easy to locate. A thermal imager helps highlight problem zones by detecting temperature variations in walls, ceilings, and areas connected to unconditioned spaces. We carry chalk, spray foam, and weatherstripping materials, allowing us to work directly with homeowners or contractors to fix visible air leakage issues on-site. After sealing, we can immediately retest to confirm whether the desired blower door score has been reached, ensuring your home complies with local energy efficiency standards in Lahaska, PA.

Blower Door Test for Contractors in Lahaska, PA

Contractors arranging blower door test in Lahaska, PA will find that homes with professional insulation can typically resolve small issues right on-site during testing. Using simple yet effective materials like chalk and spray foam, we can seal most small leaks or gaps right during testing. In over 90% of cases, we achieve a passing blower door test score within two hours and issue the full documentation needed to complete the building permit process on the same day.

Schedule Your blower door test in Lahaska, PA

Get reliable, timely, and certified blower door test in Lahaska, PA from our trained and experienced specialists. Whether you’re improving comfort as a homeowner or completing a project as a contractor, we guarantee every test is performed with accuracy and full energy code compliance.