Local Energy Audits provides certified blower door testing in Moorestown, NJ for new construction, renovations, and existing homes. Our techs work across Burlington County and will identify leakage points, explain the results, and help you meet the IECC benchmark required for your permit.
Local Context for Blower Door Testing in Moorestown, NJ
Moorestown covers ZIP codes 08057. The housing stock in Moorestown consists of affluent suburban character with a mix of historic homes, mid-century development, and newer luxury construction. Notable neighborhoods include Moorestown Historic District, Lenola, Moorestown Heights. Major access routes include Route 38, Route 73, and I-295.
Moorestown sits in IECC Climate Zone 4A (Mixed-Humid), which determines the insulation R-values and air-sealing standards required by 2021 IECC (via the NJ Uniform Construction Code, N.J.A.C. 5:23). Local electric service is provided by PSE&G (northern Burlington) or Atlantic City Electric (southern Burlington), with natural gas typically served by PSE&G or New Jersey Natural Gas.
The Blower Door Test — Moorestown, NJ
The blower door test is a calibrated airflow measurement that produces one critical number: air changes per hour at 50 Pascals (ACH50). That number tells you — and your Burlington County building inspector — whether your Moorestown, NJ home’s thermal envelope meets the IECC requirement.
In practice, it’s the most informative single test you can do on a home. It identifies leak locations, quantifies the overall leakage rate, and guides decisions about air sealing, insulation, and ventilation strategy.
What Our Clients Say
Saima Faiz — October 2024
I recently contacted Local Energy Audits for help with a suspected duct leak. From the start, they asked all the right questions and even requested pictures to better understand the situation. Based on the information I provided, they recommended a specific service, which, surprisingly, they didn’t even sell. They didn’t charge me anything for their time, and the advice they gave was invaluable. Their honesty, professionalism, and genuine desire to help really stood out. I highly recommend them.
Max Young — September 2024
Frustrated with my high electric bills — despite an efficiency drive in lighting and appliances — I suspected HVAC was to blame but didn’t know where to start. Research suggested an energy audit, and I’m very happy I chose Local Energy Audits. Ori was extremely professional, thorough, and on-time. After the blower door test, he walked every room with me, patiently reviewing leaks and possible fixes. Particularly given the new federal tax credits, I found the price extraordinarily reasonable. Highly recommend.
Robin Rafkin — June 2024
I had called numerous companies and had numerous individuals to our house. No one could figure out the issues. Ori explained everything and fixed the issues. He and his crew are wonderful!
John Lentz — December 2023
Chris was a fast and efficient tech. Whole test took less than a half hour from arrival to departure and provided exactly what was needed.
Read more reviews on Google.
How Is the Blower Door Test Conducted in Moorestown?
For your blower door test in Moorestown, NJ, the technician ensures all exterior doors and windows are sealed and interior doors stay open. An adjustable aluminum frame with a fabric panel is installed in a central exterior door. A calibrated fan depressurizes the home to 50 Pascals — roughly the force of a 20 mph wind pressing on the house.
As air is drawn out, outside air rushes in through unsealed spaces. A manometer measures fan airflow against the pressure differential, and the result converts to air changes per hour (ACH).
What Counts as a Passing Score in Burlington County?
Moorestown, NJ enforces the 2015 IECC (or newer), which sets a 3 ACH50 maximum for new residential construction. Your blower door test result must come in at or below that number to pass.
For context: a tight, well-built new home typically reads 1.5–2.5 ACH50. Older homes without any air sealing work can read 8–15 ACH50. The goal of testing early in a build is to catch issues while they’re still easy to fix.
Why Do I Need a Blower Door Test in Moorestown?
NJ enforces the IECC, requiring blower door tests on residential construction and substantial renovations. We regularly run tests for builders, HVAC contractors, and homeowners in Burlington County needing to meet code and close out permits. A duct leakage test may also be required if ductwork sits outside the thermal envelope.
How Builders in Burlington County Pass the Blower Door Test
- Start with the air barrier specification. Know what product (Tyvek, ZIP, spray foam) you’re using for the continuous air barrier before framing begins.
- Tape every seam. Housewrap left untaped is not an air barrier — it’s just a water barrier.
- Insulation must be correctly installed to R-value spec for NJ’s climate zone, with no gaps or compression.
- Every penetration — plumbing, wiring, HVAC refrigerant lines, dryer vent — gets caulked or foamed.
- Doors and windows must be properly installed and weatherstripped.
- Seal the attic hatch, recessed lights, and rim joists. These are top-five leakage points in Moorestown homes.
- Pull the air barrier checklist used by your inspector and walk it before scheduling the test.
- On test day, we bring sealing materials and can often address small leaks in-the-moment.
- Our first-try pass rate is above 90%, with full documentation typically delivered within two hours.
What to Expect on Test Day in Moorestown
On the day of your blower door test in Moorestown, NJ, we’ll ask you to shut off heating, cooling, and exhaust fans. When our tech arrives, they’ll walk the house to make sure every exterior opening is closed and every interior door is open.
The blower door frame goes into a central exterior door, the calibrated fan depressurizes the home to 50 Pascals, and we use a thermal imager to locate leak points. We carry caulk, spray foam, and weatherstripping — so if we find leaks that are easily addressable, we can seal them on-site and retest. Most Burlington County appointments wrap up in 1–2 hours.
Blower Door Testing for Moorestown Contractors
For contractors running blower door tests in Moorestown, NJ, most well-insulated homes can handle small issues on-site. With caulk and spray foam on hand, we can typically seal small leaks during the visit. In over 90% of cases, we achieve a passing score within two hours and deliver the documentation your Burlington County inspector needs to close the permit without delay.
Rebates and Incentives for Moorestown Homeowners
New Jersey’s energy code is the 2021 IECC, enforced through the Uniform Construction Code. The NJ Department of Community Affairs publishes statewide requirements; municipal construction officials handle permits and inspections. Homeowners in Moorestown may qualify for NJ Clean Energy’s Home Performance with ENERGY STAR program (rebates up to $4,000 for air sealing and insulation upgrades) — details available at https://www.njcleanenergy.com/.
At the federal level, the Inflation Reduction Act’s Energy Efficient Home Improvement Credit (Section 25C) covers 30% of the cost of a home energy audit (up to $150), plus 30% of qualifying air sealing and insulation improvements (up to $1,200/year combined). Our technicians hold BPI Building Analyst Professional credentials, which is the qualification required for most New Jersey rebate programs.
Frequently Asked Questions
What ACH50 do I need to pass the blower door test in Moorestown, NJ?
Under 2021 IECC (via the NJ Uniform Construction Code, N.J.A.C. 5:23), the pass threshold is 3 ACH50 or lower for most residential construction. Newly built homes in Moorestown with attention to air sealing typically achieve 1.5-2.5 ACH50.
How long does a blower door test take in Moorestown?
Most blower door tests in Moorestown take 1-2 hours total, including setup, testing, leak identification with thermal imaging, and documentation. Minor sealing work, if needed, can often be done on-site.
Does my NJ home need mechanical ventilation?
If your Moorestown home tests at 3 ACH50 or tighter (which current code requires), 2021 IECC (via the NJ Uniform Construction Code, N.J.A.C. 5:23) also requires balanced mechanical ventilation per ASHRAE 62.2 to maintain indoor air quality. This is typically an ERV or HRV system sized to the home.
What insulation R-values are required in Climate Zone 4A?
For Moorestown (4A (Mixed-Humid)): R-49 ceilings, R-20 walls (or R-13 + R-5 continuous), and R-10 continuous or R-13 cavity for basement walls per 2021 IECC (via the NJ Uniform Construction Code, N.J.A.C. 5:23). These minimums drive what your home needs to pass overall energy code.
Request a Blower Door Test in Moorestown, NJ
Homeowners, builders, HVAC contractors — we test for all of them across Burlington County. Calibrated equipment, certified technicians, same-day documentation, and sealing materials on-site if you need them.