Blower Door Test in Newfield, NJ

Enhance comfort and confirm compliance with detailed blower door test in Newfield, NJ. Our certified specialists support homeowners, builders, and contractors by locating hidden air leaks, improving efficiency, and achieving NJ energy code compliance.

What Is A Blower Door Test?

A blower door test helps calculate air changes per hour in your property. This natural air exchange process refreshes the indoor environment with new air. When the air changes too often, energy efficiency drops since the system must continuously reheat or recool the air inside. When too much air is exchanged, it can cause drafts, reduce comfort, and create conditions for moisture buildup and mold. A blower door test in Newfield, NJ identifies potential air leakage problems early so homeowners and builders can improve comfort, energy performance, and home durability.

What Our Clients Say

How Is A Blower Door Test Conducted?

During blower door test in Newfield, NJ, exterior openings are closed securely, and interior doors are left open to maintain even air circulation across the house. A single main exterior door is fitted with an adjustable aluminum frame and attached fabric panel to begin the setup. A calibrated fan is installed onto the frame, creating a pressure difference of 50 Pascals, comparable to a continuous 20 mph wind blowing on the home.

When indoor air is extracted, outdoor air pushes in through every leak and small gap in the building. A nanometer precisely gauges the pressure applied by the fan in relation to the home’s internal air pressure. From these readings, the number of air changes per hour (ACH) is determined, revealing the home’s airtightness and performance efficiency in NJ.

What Is A Passing Blower Door Test Score?

In Newfield, NJ, homes are designed to meet or exceed the 2015 International Energy Conservation Code (IECC) or the latest locally adopted standards. In most areas, an acceptable blower door test result is 3 air changes per hour or less, confirming that the home achieves optimal energy efficiency. Reaching the target during your blower door test in Newfield, NJ guarantees lower energy consumption and full code compliance.

Why Do I Need A Blower Door Test?

Across NJ, the IECC (International Energy Conservation Code) is adopted by the state and local jurisdictions, requiring blower door test on residential constructions and renovations. We regularly provide blower door test in Newfield, NJ for home builders, contractors, and homeowners working to meet local code requirements and close permits. A duct leakage test is sometimes required if any HVAC components or duct lines are found beyond the building’s thermal envelope. Learn more about energy code compliance.

By performing blower door test in Newfield, NJ, homeowners can identify where conditioned air escapes. Depressurization makes leaks visible, uncovering ways to enhance comfort and efficiency. Taking only a few hours, a blower door test creates a long-lasting impact by improving comfort, performance, and efficiency in NJhomes.

How To Pass A Blower Door Test:

  • Anticipate potential air leaks before testing begins.
  • Use Tyvek or Zip Sheathing as your air barrier and carefully tape all seams to prevent air leakage.
  • Use insulation that has the designated R-value and confirm it’s properly applied throughout the building envelope for maximum efficiency.
  • Seal all penetrations in exterior walls using caulk or spray foam.
  • Ensure doors and windows are properly installed, caulked, and weather-sealed.
  • Ensure complete sealing of all openings between conditioned rooms and unconditioned areas like basements, attics, and crawl spaces.
  • Many cities provide compliance checklists through their building departments — see the Philadelphia version here.
  • Our team at Local Energy Audits employs thermal imaging, caulk, and spray foam to locate and repair leaks efficiently on-site./li>
  • In most situations—over 90% of the time—we get a passing score within two hours and finalize all required paperwork.

Preparing for a Blower Door Test in Newfield, NJ

As part of preparing for blower door test in Newfield, NJ, we power down the HVAC system along with kitchen and bathroom exhaust fans. Next, a brief home walkthrough ensures every exterior door and window is closed — even those opening to unconditioned areas like garages or basements outside the thermal envelope. After ensuring the home is fully sealed, we mount the blower door fan and frame on a central exterior door and depressurize the interior to 50 Pascals for accurate testing. When the home reaches negative pressure, outside air infiltrates through openings, making leaks visible. With a thermal imager, we identify cold or warm spots in walls, ceilings, and other surfaces that reveal air leakage into unconditioned spaces. Equipped with chalk, spray foam, and weatherstripping, we can directly assist homeowners or contractors in resolving visible air leakage problems on-site. Once air leaks are sealed, we quickly retest to determine if the desired blower door score has been achieved, ensuring your home meets Newfield, NJ efficiency codes.

Blower Door Test for Contractors in Newfield, NJ

For contractors coordinating blower door test in Newfield, NJ, most well-insulated properties can quickly take care of small issues during the testing process. By applying materials such as chalk and spray foam, small leaks or gaps are often sealed on the spot. In over 90% of cases, we manage to secure a passing blower door test score within just two hours and immediately provide all necessary paperwork to close out the permit process.

Schedule Your blower door test in Newfield, NJ

Get professional-grade, efficient, and certified blower door test in Newfield, NJ handled by our experienced staff. Whether you’re improving your home’s comfort or closing a building permit, our tests are performed with care and meet all energy efficiency codes.