Blower Door Test in Tenafly, NJ

How Is A Blower Door Test Conducted?

To perform blower door test in Tenafly, NJ, all exterior doors and windows are tightly sealed, while interior doors remain open to promote balanced airflow throughout the home. A single central exterior door is designated, where the blower door’s aluminum frame and fabric panel are set up. A precisely calibrated fan is installed on the frame to reduce the air pressure inside to 50 Pascals, equal to a steady 20 mph wind outdoors.

When the fan pulls air out, outdoor air enters the house through cracks, openings, and unsealed areas. A nanometer precisely gauges the pressure applied by the fan in relation to the home’s internal air pressure. The pressure data is turned into air changes per hour (ACH), a measure of how efficiently and tightly the home is sealed in NJ.

What Is A Passing Blower Door Test Score?

In Tenafly, NJ, compliance with the 2015 International Energy Conservation Code (IECC) or subsequent locally adopted versions is typically mandatory for residential properties. An acceptable blower door test result in most areas is 3 air changes per hour or less, demonstrating solid energy performance. Achieving this goal during your blower door test in Tenafly, NJ promotes energy savings and demonstrates adherence to local building rules.

Why Do I Need A Blower Door Test?

The State of NJ and numerous local municipalities adhere to the IECC (International Energy Conservation Code), which mandates blower door test for all newly built or renovated residential homes. We provide support to home builders, contractors, and homeowners needing blower door test in Tenafly, NJ for meeting energy efficiency standards and finalizing permits. A duct leakage test can be required when ducts or HVAC components are installed outside the structure’s thermal envelope. Learn more about energy code compliance.

With blower door test in Tenafly, NJ, homeowners can detect where energy is being wasted. As the fan depressurizes the house, leaks are revealed, highlighting areas for sealing and savings. blower door test in Tenafly, NJ provides homeowners with clear insights into energy loss. When the fan creates pressure differences, leaks are exposed, allowing for easy detection and repair. Typically completed within a few hours, a blower door test provides a long-lasting impact on comfort, energy efficiency, and overall home performance in NJ’ varied climate.

How To Pass A Blower Door Test:

• Anticipate potential air leaks before testing begins.
• Install an effective air barrier, for example Tyvek or Zip Sheathing, and make certain all seams are sealed with durable tape.
• Apply insulation of the correct R-value and make sure it fits snugly in all areas of the building envelope.
• Seal all penetrations in exterior walls using caulk or spray foam.
• Ensure doors and windows are properly installed, caulked, and weather-sealed.
• Make sure to seal all separations between conditioned and unconditioned areas, including crawl spaces, basements, and attics.
• Many local building offices offer a step-by-step checklist to confirm compliance — view the Philadelphia sample here.
• Our team at Local Energy Audits employs thermal imaging, caulk, and spray foam to locate and repair leaks efficiently on-site./li>
• Over 90% of the time, we complete testing with a passing score in two hours or less and handle all permit paperwork on-site.