Blower Door Test in Wynnewood, PA

Improve insulation performance and meet energy code requirements through thorough blower door test in Wynnewood, PA. Our skilled technicians help homeowners, builders, and contractors find air leaks, increase comfort, and comply with PA energy standards.

What Is A Blower Door Test?

A blower door test helps determine the air changes per hour to confirm that your home has sufficient fresh air replacement. Too many air changes can negatively impact efficiency, as every replacement of indoor air demands additional heating or cooling energy. Excessive ventilation can lead to unwanted drafts, air leakage discomfort, and potential mold, condensation, or moisture problems indoors. A blower door test in Wynnewood, PA makes it easier to locate leaks and inefficiencies early, ensuring lasting comfort and reduced energy waste.

888 213-3975

What Our Clients Say

How Is A Blower Door Test Conducted?

To execute blower door test in Wynnewood, PA, exterior windows and doors are secured shut, while interior doors are left open to distribute air evenly. An adjustable aluminum frame and sturdy fabric panel are installed in one central exterior door to prepare for testing. The technician mounts a calibrated fan to the frame to depressurize the house to 50 Pascals, roughly matching a 20 mph wind effect.

As the fan exhausts indoor air, outside air starts seeping into the home through small leaks and gaps. With the help of a nanometer, we determine the pressure difference between the fan’s airflow and the home’s internal conditions. The gathered results are converted into air changes per hour (ACH) to determine how well-sealed and efficient the home is in the PA climate.

What Is A Passing Blower Door Test Score?

Houses in Wynnewood, PA are required to meet the standards of the 2015 International Energy Conservation Code (IECC) or the latest locally adopted version. Most areas recognize 3 air changes per hour or less as the target blower door test value to ensure energy efficiency. Reaching the target during your blower door test in Wynnewood, PA guarantees lower energy consumption and full code compliance.

Why Do I Need A Blower Door Test?

The State of PA and its local governments follow the IECC standards, which require blower door test on newly built or remodeled residential dwellings. We frequently assist home builders, contractors, and homeowners who need blower door test in Wynnewood, PA to comply with energy codes and finalize building permits. A duct leakage test could be required when air ducts or HVAC units extend outside the structure’s thermal envelope. Learn more about energy code compliance.

Performing blower door test in Wynnewood, PA allows homeowners to identify and fix leaks. The test makes air infiltration visible, uncovering opportunities to reduce energy loss. In only a few hours, a blower door test can deliver a long-lasting impact on energy efficiency, comfort, and indoor performance throughout PA’ changing seasons.

How To Pass A Blower Door Test:

Anticipate potential air leaks before testing begins.
Use high-quality air barrier materials like Tyvek or Zip Sheathing and confirm all seams are perfectly taped.
Place insulation with the accurate R-value and check for proper installation and full coverage in the building envelope.
Seal all penetrations in exterior walls using caulk or spray foam.
Ensure doors and windows are properly installed, caulked, and weather-sealed.
Properly seal all connections between conditioned and unconditioned zones, including basements, crawl spaces, and attics.
Many cities provide compliance checklists through their building departments — see the Philadelphia version here.
At Local Energy Audits, we utilize thermal imaging equipment, caulk, and spray foam to identify and fix air leaks during testing./li>
Over 90% of the time, we achieve a passing score in under two hours and provide all required documentation to finalize the building permit.

Preparing for a Blower Door Test in Wynnewood, PA

Before starting blower door test in Wynnewood, PA, we turn off all heating, air conditioning, and exhaust fans in bathrooms and kitchens. We perform a quick check throughout the property, making sure all exterior windows and doors — including those to unfinished or non-conditioned areas — are sealed, maintaining the thermal envelope. After ensuring the home is airtight, we install the blower door frame and fan in a central exterior door and depressurize the house to 50 Pascals to record airflow and leakage data accurately. After the pressure drops, outdoor air enters through gaps more noticeably, making leaks easier to identify. Using a thermal imager, we detect problem areas by observing temperature variations in walls, ceilings, and other surfaces that connect to unconditioned spaces. We bring the tools and materials—chalk, spray foam, and weatherstripping—to work with homeowners or contractors in fixing visible air leakage issues immediately. After sealing the identified leaks, we retest right away to confirm that the desired blower door score meets local energy performance standards in Wynnewood, PA.

Blower Door Test for Contractors in Wynnewood, PA

For contractors coordinating blower door test in Wynnewood, PA, most well-insulated properties can quickly take care of small issues during the testing process. Using professional-grade materials like chalk and spray foam, we seal small leaks or gaps as soon as they’re detected. In over 90% of cases, our technicians achieve a passing blower door test score within just two hours and supply all necessary documentation to finalize the building permit efficiently.

888 213-3975

Schedule Your blower door test in Wynnewood, PA

Enjoy fast response, professional service, and certified results with blower door test in Wynnewood, PA from our expert team. Whether you’re a homeowner improving energy performance or a contractor completing certification, we make sure each test fulfills all energy code requirements.

📞 Call 888-213-3975 ✉️ Contact Us