Duct Leakage Test in Crum Lynne, PA

How a Duct Leakage Test Is Conducted

To commence a duct leakage test in Crum Lynne, PA, your technician will seal every supply and return register except the primary return or air handler. A duct blaster — a precision-calibrated fan — is then fitted to the duct opening. By depressurizing the system, it makes all air leaks much easier to detect.

The duct blaster collaborates with a precision pressure sensor to evaluate airflow and locate leaks throughout the ductwork without disturbing your household. A duct leakage test — often known as a duct blaster test — exposes duct air loss, allowing you to apply the most effective sealing techniques.

duct leakage test is quick, neat, and intentionally non-intrusive for anyone living in the home. Most tests in Crum Lynne, PA take between 30 and 60 minutes, and the improvements they deliver can elevate comfort and efficiency for years ahead.

How to Measure Duct Leakage

Duct leakage is reported in cubic feet per minute (CFM) per 100 square feet of conditioned home area. Your technician uses a nanometer to read small pressure variations, helping determine the volume of air escaping through the ducts. Understanding this number lets you identify inefficiencies, weigh improvement options, and confirm your home’s compliance with local energy code requirements in Crum Lynne, PA.

Cost of Excessive Duct Leakage

If your home suffers from costly utility bills, uneven comfort levels, or persistent HVAC repairs, duct leakage may be contributing. According to ENERGY STAR, homes with leaky ducts routinely lose 20% to 30% of conditioned air. Hot or cold outdoor air infiltrating your system makes your HVAC system work overtime, which boosts energy costs and reduces comfort.

Overworked equipment also puts extra stress on the system, resulting in breakdowns and increased repair costs. Proper duct sealing helps support the long-term durability of your HVAC system, lengthening its lifespan and minimizing ongoing maintenance demands.

Duct leaks can also enable dust, mold spores, elevated moisture, and unwanted contaminants to infiltrate the duct system. This can irritate allergies, harm the air quality inside, and cause expensive hidden structural damage as time goes on.

How to Properly Seal Ductwork in an Old Home

The 2015 IRC/IECC enforces that new homes incorporate fully sealed ducts made with modern, energy-efficient materials including mastic, foil tape, and insulation. But what if the leaks are buried far inside your walls or ceilings?

Aerosol sealing technology (AeroSeal) is one way to reach hidden openings inside ductwork. To carry out this method, every vent is sealed except a single access point. The HVAC system is separated, and a machine is attached to the duct system. It pressurizes the ducts and injects fine aerosol particles that seal tiny gaps and holes that typical sealing techniques miss.

This method works best for small to medium leaks. However, large openings usually require traditional manual sealing using mastic and tape. Technicians perform pre- and post-aerosol sealing duct leakage tests to measure the improvement and confirm treatment effectiveness.

Common Areas of Duct Leakage

The most common place for ducts to leak air is through the joints. Ductwork is made of multiple metal pieces pressed together using tight fittings and metal bands, but these connections are rarely airtight.

As your HVAC system moves through annual heating and cooling cycles, the ductwork expands and then contracts. Over time, this movement causes joints to lose their seal, creating gaps and leaks — making a duct leakage test valuable for any home in Crum Lynne, PA, whether new or old.

Many energy auditors look for leaks by feeling the ducts and using a small tool to evaluate how wide the gaps at the joints are. If your duct system isn’t sealed with mastic and approved tape, there’s a good chance that leaks are occurring.

What Is an Acceptable Amount of Duct Leakage per Energy Code?

To achieve a passing duct leakage result, your system must show under 4 CFM per 100 square feet if the air handler is installed, or 3 CFM per 100 square feet if it is not. For new construction, an occupancy certificate cannot be issued unless the home passes a duct leakage test.

If your home in Crum Lynne, PA falls short in a duct leakage test, you are probably paying extra for heating and cooling — and placing lasting pressure on your HVAC equipment. Meeting the 3–4 CFM requirement is essential not only for following building code, but for keeping your home comfortable and energy-efficient.

Your technician will also provide professional insights on resolving leakage issues so you can achieve a passing score, lower your utility costs, and optimize home performance.

Local Energy Audits — affordable duct leakage test in Crum Lynne, PA

Local Energy Audits proudly provides solutions to customers throughout Crum Lynne, PA and surrounding regions. We specialize in assessing duct leakage and energy inefficiencies with blower door tests and duct leakage tests. Whether it’s a new build or a current home, we’re here to support you.
If you’d like to schedule a test, call us during business hours or contact us online to request an appointment.